Public Safety band Radio Module 2 PSM2 Product Manual 4.9GHz Public Safety band Access Radio Module FCC ID RAR20008001 Document Date: April 2007 Document Number: PM-B2CG085AA Document Version Number: 1 Document Status: Release © Copyright 2007 by BelAir Networks. All rights reserved..
PSM2 Product Manual – 4.9 GHz Public Safety Band Radio Module Contents About this Document.................................................................................................. 3 Introduction................................................................................................................. 3 Picture of the B2CG085AA 4.9 GHz Public Safety band Radio............................ 4 General Conditions of Use ..............................................................................
PSM2 Product Manual – 4.9 GHz Public Safety Band Radio Module About this Document This document is a product manual for the B2CG085AA 4.9 GHz Public Safety band Access Radio Module 2, FCC ID RAR 20008001. The manual outlines the radio modules limitations on use in BelAir Networks products marketed or offered for sale. An overview of BelAir Networks products is included with information on the module installation in these products.
PSM2 Product Manual – 4.9 GHz Public Safety Band Radio Module Picture of the B2CG085AA 4.9 GHz Public Safety band Radio Module is shown below for reference.
PSM2 Product Manual – 4.9 GHz Public Safety Band Radio Module General Conditions of Use This manual is intended to supplement training provided by BelAir Networks or authorized parties. The module B2CG085AA is only intended for use in BelAir Networks products and is not for sale to the general public as a stand-alone module. Please read this entire document, including the Regulatory Statements section before attempting to install or operate the module.
PSM2 Product Manual – 4.9 GHz Public Safety Band Radio Module Overview of B2CG085AA module installation into BelAir Networks products List of Approved Final Products The B2CG085AA module is only approved for use in the following BelAir Networks products: • BelAir100T. See BelAir documentation for complete manufacturing instructions. Operation of the module within the products expressly listed above is required to ensure compliance to all FCC regulations.
PSM2 Product Manual – 4.9 GHz Public Safety Band Radio Module B2CG085AA module installation into BA100T product The module can be installed into the BelAir Networks BA100T product. The BA100T product is capable of incorporating up to three radio modules, options include one B2CG085AA ( FCC ID :RAR20008001) module with one B2CH043AA-C ( FCC ID :RAR20000003)2.4 GHZ ISM band Access module as well one RAR20001003 Backhaul Radio module. A BA100T with associated antennas is shown in figure 3.
PSM2 Product Manual – 4.9 GHz Public Safety Band Radio Module Module installation in a BA100T clam shell The assembly is made up of two bolted clamshells. The modules are installed in the bottom clamshell. Figure 5 & 6 outline how boards are installed. Refer to document RAR20008001_Label Information_v1.pdf for FCC label location details for the module.
PSM2 Product Manual – 4.9 GHz Public Safety Band Radio Module BA100T Unit FCC Labeling One or more labels are applied to the product during manufacture, including a label which identifies the FCC identification numbers. Refer to figures 7 and 8 for label location on BA100T product. Do not attempt to remove any labels from the module.
PSM2 Product Manual – 4.9 GHz Public Safety Band Radio Module Antenna Usage and Module Transmit Power B2CG085AA module shall only be used in conjunction with the following antenna types: 4.
PSM2 Product Manual – 4.9 GHz Public Safety Band Radio Module MTI MT-464002/NV; 16 dBi 60 degree sector (V) MTI MT-464003/NV; 15.5 dBi 90 degree sector (V) MTI MT-444003/NV; 15 dBi 120 degree sector (V) In order to comply with the FCC rules in the USA, the module is limited to the maximum transmit power limits as follows for each of the antenna types. For all antennae as outlined above, the maximum average transmit power is 23.8 dBm.
PSM2 Product Manual – 4.9 GHz Public Safety Band Radio Module Regulatory Statements The following regulatory notes apply to the product which contains module B2CG085AA (FCC ID: RAR20008001). The following sections or equivalent information shall appear in the user-manual of the final product. Regulatory Information and Disclaimers Installation and use of this device must be in strict accordance with the instructions included in the user documentation provided with the product.
PSM2 Product Manual – 4.9 GHz Public Safety Band Radio Module radiator and a human body. Refer to Appendix A for typical information on approved antennas for the B2CG085AA (RAR20008001) module. Table 2 outlines the worst case scenarios for the combinations of the subject Radio modules and approved antennas. With respect to the RAR20001003, BRM 3 module, please refer to the specific module installation guide (Module B2CC033AA, manual :RAR20001003_Manual.
PSM2 Product Manual – 4.
PSM2 Product Manual – 4.
PSM2 Product Manual – 4.
PSM2 Product Manual – 4.9 GHz Public Safety Band Radio Module Mobile Mark magnetic Mounted Omni Antennas BelAir Networks Inc. 603 March Road Kanata, Ontario Canada K2K 2M5 Sales sales@belairnetworks.com Support support@belairnetworks.com General Information Info@belairnetworks.
