FCC ID: RAR20005002 RAR20005002 Product Manual 5 GHz WLAN Module with Antenna Switch Module Document Date: Document Number: Document Version Number: Document Status: January 2006 PM-RAR20005002 1 Release © Copyright 2005 by BelAir Networks. All rights reserved..
RAR20005002 Product Manual – 5 GHz WLAN Radio Module with Antenna Switch Module Contents About this Document ............................................................. 2 Introduction ............................................................................. 3 Conditions of Use.................................................................... 4 Module Installation and Service ............................................ 6 Final Product Requirements ..................................................
RAR20005002 Product Manual – 5 GHz WLAN Radio Module with Antenna Switch Module Introduction The RAR20005002 (hereafter referred to as “the module”) is a 5 GHz radio module compatible with the IEEE 802.11 standard for Wireless LAN operation. It is designed to be interoperable with WLAN products which are based on Direct Sequence Spread Spectrum (DSSS) radio technology. The module contains a complete 802.11a radio and Medium Access Control (MAC) protocol engine which allows implementation of an 802.
RAR20005002 Product Manual – 5 GHz WLAN Radio Module with Antenna Switch Module Conditions of Use General Conditions of Use This manual is intended to supplement training provided by BelAir Networks or authorized parties. The module RAR20005002 is only intended for use in BelAir Networks products and is not for sale to the general public as a standalone module. Please read this entire document, including the Regulatory Statements section before attempting to install or operate the module.
RAR20005002 Product Manual – 5 GHz WLAN Radio Module with Antenna Switch Module Canada as IC: 4674A-20005002. Please read all regulatory statements at the end of this document before any attempt to install or operate this module. The module is only certified for operation in the United States and Canada. Before attempting to install and operate this module in any other country, contact BelAir Networks for approval.
RAR20005002 Product Manual – 5 GHz WLAN Radio Module with Antenna Switch Module Module Installation and Service Installation into a Product The module shall only be installed by a technician trained by BelAir Networks or its authorized agents. It should only be installed into an approved product (see above) following all manufacturing and service procedures for that product. The module should only be installed into a final product in a manufacturing or service depot site.
RAR20005002 Product Manual – 5 GHz WLAN Radio Module with Antenna Switch Module Final Product Requirements The requirements below apply to any final product in which the RAR20005002 module is installed. Antenna Usage RAR20005002 module shall only be used in conjunction with the following antenna types: • BelAir Networks model: BMA000203, 15 dBi directional antenna, horizontal beamwidth 45 degrees. • BelAir Networks model: BMA000221, 12.5 dBi directional antenna, horizontal beamwidth 45 degrees.
RAR20005002 Product Manual – 5 GHz WLAN Radio Module with Antenna Switch Module BelAir200 and is prohibited. The BelAir-supplied power cable includes emission suppression components as part of the cable assembly (Steward 28A5776-0A2 and Nexter NF-65). Adherence to these rules by the professional installer is mandatory. See full installation procedures for the particular product for details.
RAR20005002 Product Manual – 5 GHz WLAN Radio Module with Antenna Switch Module Regulatory Statements The following regulatory notes apply to the product which contains module FCC ID: RAR20005002. The following sections or equivalent information shall appear in the user-manual of the final product. Regulatory Information and Disclaimers Installation and use of this device must be in strict accordance with the instructions included in the user documentation provided with the product.
RAR20005002 Product Manual – 5 GHz WLAN Radio Module with Antenna Switch Module television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
RAR20005002 Product Manual – 5 GHz WLAN Radio Module with Antenna Switch Module should be installed and operated at a minimum distance between the radiator and a human body as follows: • 25 cm (9.8 inches) for operation in the 5.15 – 5.35 GHz band. • 33 cm (13 inches) for operation in the 5.725 – 5.850 GHz band.
RAR20005002 Product Manual – 5 GHz WLAN Radio Module BelAir Networks U.S. East 11921 Freedom Drive Suite 550 Reston, VA USA 20190 BelAir Networks U.S. West 1902 Wright Place Suite 200 Carlsbad, CA USA 92008 BelAir Networks Inc. 603 March Road Kanata, Ontario Canada K2K 2M5 703-736-8306 760-918-5544 613-254-7070 January 2006 Sales sales@belairnetworks.com Support support@belairnetworks.com General Information Info@belairnetworks.