BEL20000 BEL20000 Product Manual 2.4 GHz WLAN Radio Module Document Date: July 2004 Document Number: PM20000-002 Document Version Number: 3 Document Status: Release © Copyright 2004 by BelAir Networks. All rights reserved..
BEL20000 Product Manual – 2.4 GHz WLAN Radio Module Contents About this Document............................................................2 Introduction ...........................................................................3 Conditions of Use ..................................................................4 Module Installation and Service..........................................6 Final Product Requirements .................................................7 Regulatory Statements ..................
BEL20000 Product Manual – 2.4 GHz WLAN Radio Module Introduction The BEL20000 (hereafter referred to as “the module”) is a 2.4 GHz radio module compatible with the IEEE 802.11 standard for Wireless LAN operation. It is designed to be interoperable with WLAN products which are based on Direct Sequence Spread Spectrum (DSSS) radio technology. The module contains a complete 802.11b radio and Medium Access Control (MAC) protocol engine which allows implementation of an 802.11b access point (AP).
BEL20000 Product Manual – 2.4 GHz WLAN Radio Module Conditions of Use General Conditions of Use This manual is intended to supplement training provided by BelAir Networks or authorized parties. The module BEL20000 is only intended for use in BelAir Networks products and is not for sale to the general public as a stand-alone module. Please read this entire document, including the Regulatory Statements section before attempting to install or operate the module.
BEL20000 Product Manual – 2.4 GHz WLAN Radio Module Country of Use BEL20000 is certified with limited modular approval for use as an Intentional Radiator in the United States as device: FCC ID: RAR20000001 and in Canada as IC: 4674A-20000001. Please read all regulatory statements at the end of this document before any attempt to install or operate this module. The module is only certified for operation in the United States and Canada.
BEL20000 Product Manual – 2.4 GHz WLAN Radio Module Module Installation and Service Installation into a Product The module shall only be installed by a technician trained by BelAir Networks or its authorized agents. It should only be installed into an approved product (see above) following all manufacturing and service procedures for that product. The module should only be installed into a final product in a manufacturing or service depot site.
BEL20000 Product Manual – 2.4 GHz WLAN Radio Module Final Product Requirements The requirements below apply to any final product in which the BEL20000 module is installed. Antenna Usage and Module Transmit Power BEL20000 module shall only be used in conjunction with the following antenna types: • BelAir Networks model: BEL10012, 8.5 dBi directional diversity antenna. • BelAir Networks model: B1BB031AA, 11.5 dBi directional diversity antenna. • MaxRad model: MFB24008, 8 dBi omnidirectional antenna.
BEL20000 Product Manual – 2.4 GHz WLAN Radio Module Warning: Use of this module in conjunction with any antenna not expressly listed above will void authority to install or operate this equipment. Warning: Setting of module transmit power above the limits specified in the above table will exceed FCC or Industry Canada limits and void authority to install or operate this equipment.
BEL20000 Product Manual – 2.4 GHz WLAN Radio Module This device contains the following: FCC ID: RAR20000001 IC: 4674A-20000001 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
BEL20000 Product Manual – 2.4 GHz WLAN Radio Module Regulatory Statements The following regulatory notes apply to the product which contains module BEL20000. The following sections or equivalent information shall appear in the user-manual of the final product. Regulatory Information and Disclaimers Installation and use of this device must be in strict accordance with the instructions included in the user documentation provided with the product.
BEL20000 Product Manual – 2.4 GHz WLAN Radio Module equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
BEL20000 Product Manual – 2.4 GHz WLAN Radio Module RF Exposure Statement This Wireless LAN radio device has been evaluated under FCC Bulletin OET 65C and found to be compliant to the requirements set forth in CFR 47 Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF exposure from radio frequency devices. This device complies with FCC RF radiation exposure limits for an uncontrolled environment. The radiated output power of this Wireless LAN device is below the FCC radio frequency exposure limits.
BEL20000 Product Manual – 2.
BEL20000 Product Manual – 2.4 GHz WLAN Radio Module BelAir Networks U.S. East 11921 Freedom Drive Suite 550 Reston, VA USA 20190 BelAir Networks U.S. West 1902 Wright Place Suite 200 Carlsbad, CA USA 92008 BelAir Networks Inc. 603 March Road Kanata, Ontario Canada K2K 2M5 703-736-8306 760-918-5544 613-254-7070 July 2004 Sales sales@belairnetworks.com Support support@belairnetworks.com General Information Info@belairnetworks.