PANTONE 207C PANTONE 431C BLACK SpeedLIGHT16 / TurboLIGHT16 ONT Unit NS 161XX (NS 16100 NN and NS 16 1G NN) Please read this manual carefully before operating your set. Retain it for future reference.
Nortel Networks. All Rights Reserved SL16&TL16 8 Regulatory information 11 About NS 161XX 14 Checking packge contents 15 Installing NS 161XX 19 Setting NS 161XX Audience Nortel Networks. All Rights Reserved Product and personal safety guidelines This section contains safety guidelines that you must follow for personal safety and to operate the equipment correctly. LG-Nortel documentation contains precautionary messages and safety procedures that refer to specific tasks or conditions.
Safety standards Handling optical fibers LG-Nortel products conform to all relevant safety standards.
DANGER Risk of electrical shock The (AC) mains connection from the power adapter to the power supply can be a shock hazard. Read and understand the power procedures you are performing. Take necessary precautions and use the appropriate insulated tools when working with power. Other Warnings and cautions SL16&TL16 Nortel Networks. All Rights Reserved WARNINGS ! Do not disassemble this product. This can cause poor performance of the product or result in a fire, or injury from electric shock.
The list of global technical standards provided in this chapter is not exhaustive. The standards listed are generally regarded as the primary applicable electromagnetic compatibility (EMC) and safety standards. The conformity status on additional national and international standards not listed in this section can be provided upon request. United States of America Nortel Networks.
The product bears the CE mark as illustrated in the Figure on page 13. A signed Declaration of Conformity is available upon request. Regulatory labels (Safety and EMC) The following labels have been placed on the system and various field replaceable units (FRU). The main product-level regulatory label is located on the bottom of the NS 161XX. See the Figure on page 13.
Color Status ① AT Green On Is lit when link is active ② AL Red On Is lit when alarm occurs ③ FL Green On Is lit when optical link is connected to service provider through SL16 / TL16 system ④ FA Yellow On Is lit and blink when the device sends/ receives data to/from equipment of the service provider through SL16 / TL16 system ⑤ TL Orange On Is lit when Ethernet link is connected ⑥ TA Green On Is lit and blink when the device sends/ receives data to/from equipment of the servic
Check the package to make sure the following items are included. This section provides the specifications for NS 161XX installation, it also describes how to install it and connect it into a network. Installation environments Operating temperature: 0℃ to 50℃ Relative humidity: 20% to 80% Input voltage: 5V DC Power, 3A 14 14 SL16&TL16 Nortel Networks.
STEP 1: Unfasten the grounding screw on the rear side of the NS 161XX. STEP 2: Attach the 1-hole lug using the screw that was removed in STEP 1. Check that the power switch on the NS 161XX is in the off position. Insert the SC APC connector into the optical port of the NS 161XX. Insert the other end of the APC optical cable into the optical outlet on your wall. The grounding connection is suitable for terminating a #18 AWG wire. SC APC Optical cable Grounding screw ! 16 16 SL16&TL16 Nortel Networks.
Using Internet With a web browser such as the Internet Explorer on your PC, you can surf freely through the Internet. Note NS 161XX does not require any access program. Use your regular internet browser. AL LED AT LED 18 18 SL16&TL16 Nortel Networks. All Rights Reserved Checking the connection status of user devices When NS 161XX is power-fed, the Green LED for TL and Orange LED for TA should be on. The green LED on TL is the data indicator. It blinks when data is being transmitted or received.
