User Manual

ManualsBrandsEricsson-LG ManualsElectronicsWireless Telephone System

LWS (LG-Ericsson Wireless SOHO)

Installation & Operation Manual

Wireless SOHO

Installation & Operation Manual

This material is copyrighted by LG-Ericsson Co., Ltd. Any unauthorized reproductions, use or disclosure of this

material, or any part thereof, is strictly prohibited and is a violation of Copyright Laws. LG-Ericsson reserves the

right to make changes in specifications at any time without notice. The information furnished by LG-Ericsson in

this material is believed to be accurate and reliable, but is not warranted to be true in all cases.

All other brand and product names are trademarks or registered trademarks of their respective companies.

Special notes for operation in New Zealand

The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that

the item complies with the minimum conditions for connection to its network. It indicates no endorsement of

the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that

any item will work correctly in all respects with another item of Telepermitted equipment of a different make

or model, nor does it imply that any product is compatible with all of Telecoms network services.

Telepermitted equipment only may be connected to this unit’s SLT port. The SLT port is not specifically

designed for 3-wire-connected equipment, 3-wire-connected equipment might not respond to incoming

ringing when attached to this port.

Under power fail conditions, this telephone system may not operate. Please ensure that a separate

telephone, not dependent on local power, is available for emergency use.

The caller’s telephone numbers which are displayed and stored in this equipment include the callers area

code plus the toll prefix “0”. When calling-back to a local number caller using the stored CLI, the “0” and

area code will be used, which may incur a toll charge, depending on your toll carrier. If a charge for local

calls is unacceptable, only the 7 digits of the local number should be dialled.

The Caller Display receiver operates correctly in conjunction with Telecom’s ringing cadences DA1 (normal

cadence) DA2 (unused cadence) and DA4 (FaxAbility cadence). It does not operate in conjunction with

ringing cadence DA3 (unused cadence).

Summary of content (32 pages)

PAGE 1
Wireless SOHO Installation & Operation Manual Copyright© 2010 LG-Ericsson Co., Ltd. All Rights Reserved This material is copyrighted by LG-Ericsson Co., Ltd. Any unauthorized reproductions, use or disclosure of this material, or any part thereof, is strictly prohibited and is a violation of Copyright Laws. LG-Ericsson reserves the right to make changes in specifications at any time without notice.
PAGE 2
Wireless SOHO Installation & Operation Manual Wireless SOHO Installation and Operation Manual Revision History ISSUE DATE Contents of Changes 1.0 1.1 Feb. 2010 March 2010 1.2 Juluy 2010 Initial release Revised the text of Menu on LCD and corrected misspelling. And added to Special note for New Zealand. Change the new CI (LG-Ericsson) Table of Contents SPECIAL NOTES FOR OPERATION IN NEW ZEALAND ...................... IG 1 INTRODUCTION.................................................................
PAGE 3
Wireless SOHO Installation and Operation Manual Wireless SOHO Installation and Operation Manual 2.7 Display ......................................................................................................... 19G 3.10.3 Automatic Hold ........................................................................................................ 40G 2.7.1 LCD Specification ...................................................................................................... 19G 2.7.2 LCD Display ..........
PAGE 4
Wireless SOHO Installation and Operation Manual Wireless SOHO Installation and Operation Manual The LWS-WK includes one (1) wireless keyset, one (1) AC/DC power adapter, one (1) AC power cord, and one (1) ‘Quick User Guide’. Verify that all parts shown below were provided in the package. 1 INTRODUCTION This Installation & Operation Manual is designed to provide general system features and operating instructions for the LWS (LG-Ericsson Wireless SOHO) System.
PAGE 5
Wireless SOHO Installation and Operation Manual Wireless SOHO Installation and Operation Manual 1.4 System Capability 1.4.1 Description z z Lines: up to 3 Cordless Handsets: up to seven cordless handsets (provided separately) Figure 1.4-4 FAX or SLT call via SLT port of the LWS-BS LWS-BS (LWS-BS) Station 1 Station 2 Station 3 Station 4 Station 5 Station 6 Station 7 Figure 1.4-1 LWS-BS and GDC-400H/450H 1.5 Important Safety Information Read this information before installing your LWS system.
PAGE 6
Wireless SOHO Installation and Operation Manual Wireless SOHO Installation and Operation Manual 2 INSTALLATION 1.5.3 Precaution 1. Keep the LWS-BS, the LWS-WK and DECT terminals away from heating appliances and electrical noise generating devices such as fluorescent lamps microwave ovens and televisions. These noise sources can interfere with the performance of the LWS system. 2.
PAGE 7
Wireless SOHO Installation and Operation Manual Wireless SOHO Installation and Operation Manual 2.2 Battery Installation 2.2.1 GDC-400H Handset Battery Installation To install a Battery to the Handset: 1. Remove the battery cover by pressing the latch as shown, and slide down to open. 2. Verify batteries are orientated correctly for polarity when inserting. 3. Close the battery cover and slide it upward until it clicks into place. Figure 2.2.1.1-1 GDC-400H Handset Battery Charging 2.2.
PAGE 8
Wireless SOHO Installation and Operation Manual Wireless SOHO Installation and Operation Manual 2.2.2.1 GDC-450H Battery Charging To charge the handset: 1. Place handset on the plugged-in charger for 12 hours before initial use. 2.3 LWS-BS, Handset and Peripheral Connections To connect the LWS-BS with phone lines and its peripherals: 1. Connect the line cords to the ports on the bottom of the LWS-BS and the other ends to the wall sockets. 2.
PAGE 9
Wireless SOHO Installation and Operation Manual Wireless SOHO Installation and Operation Manual 2.3.3 LWS-WK Connection 2.3.1 FAX Connection The following figure illustrates how to connect a FAX to the LWS-BS: To connect the LWS-WK to be used with the LWS-BS: 1. Plug the DC outlet of the AC/DC Adapter cord into the jack on the LWS-WK. 2. Fasten the AC/DC Adapter cord to the latch hook as shown (inset detail). 3. Connect the handset curly cord to the handset jack on the bottom of the LWS-WK. 4.
PAGE 10
Wireless SOHO Installation and Operation Manual Wireless SOHO Installation and Operation Manual When the Foot Stand to either the LWS-BS or the LWS-WK is attached, it can be connected at a 35 or 55 degree angle. Warning Use only the main power adapter supplied. Any other adapter could damage your GDC-400H and invalid ate your warranty 1. Adaptor To connect the Foot Stand at a 35 degree angle, perform the following: 2. To AC OUTLET Figure 2.3.
PAGE 11
Wireless SOHO Installation and Operation Manual Wireless SOHO Installation and Operation Manual 2.5 Component Description 2.4 Hardware Installation 2.5.1 LWS-BS Description 2.4.1 Wall Mount of the LWS-BS or the LWS-WK To wall mount the LWS-BS or LWS-WK, perform the following: 1. Remove the foot stand. 2. Make sure the handset retainer tab is positioned at ‘b’ as shown below figure. Figure 2.4.1-1 Wall Mount of LWS-BS/ LWS-WK 3.
PAGE 12
Wireless SOHO Installation and Operation Manual Wireless SOHO Installation and Operation Manual 2.5.2 LWS-WK Description 2.5.3 Wireless Handset Description Figure 2.5.3-1 GDC-400H Component Description 1. Handset 2. Navigation/OK Key 3. Speaker 4. Menu Button 5. DND Button 6. Headset Button 7. Volume Up Button 8. Volume Down Button 9. Ring Indication 10. LCD 11. Line/Station Selection Buttons 12. Soft Buttons 13. MSG Button 14. Dial Buttons 15. Transfer Button 16. Hold Button 17. Mute Button 18.
PAGE 13
Wireless SOHO Installation and Operation Manual Wireless SOHO Installation and Operation Manual 2.7.2 LCD Display 2.6 Hardware Initialization 2.7.2.1 LWS-BS 2.6.1 LWS-BS and LWS-WK 1 2 3 4 5 6 7 Once the LWS-BS and the LWS-WK have been properly installed in the desired locations, perform the following: 8 1. Plug in the AC/DC adapter to the LWS-BS or the LWS-WK (use only the included AC/DC adapter, SA-B122). 2.
PAGE 14
Wireless SOHO Installation and Operation Manual Wireless SOHO Installation and Operation Manual 2.7.2.3 GDC-400H and GDC-450H Wireless Handset 2.8 Keypad Description 2.8.1 LWS-BS 1. Antenna - Displayed when the handset is in the range of a LWS-BS where it can be linked. Disappears when it moves out of range. The closer it moves to the base, the stronger RSSI for reception is.
PAGE 15
Wireless SOHO Installation and Operation Manual FUNCTIONAL CLASSIFICATION Function Keys BUTTON NAME BUTTON DESCRIPTION Menu MSG Navigation button DND Main Menu Retrieve Messages Up/down/right/left/ok Blocks incoming calls ringing. This applies to outside calls, intercom calls and transfers Connecting an optional headset to the station allows hands-free conversations by pressing [Headset] button.
PAGE 16
Wireless SOHO Installation and Operation Manual Wireless SOHO Installation and Operation Manual 2.9 LED Operation Description 2.10 Configuration 2.9.
PAGE 17
Wireless SOHO Installation and Operation Manual Wireless SOHO Installation and Operation Manual 2.10.2 LWS-BS Date and Time The Base Date and Time can be set and adjusted by the User.. In the event of a power failure, the system will retain Date and Time including Database with internal Lithium Battery. All wireless keysets registered to the Base Station will automatically adjust Date and Time according to the Base Station value after pressing Talk key or Speaker button. LWS-WK to the LWS-BS. 8.
PAGE 18
Wireless SOHO Installation and Operation Manual Wireless SOHO Installation and Operation Manual 2.11.2 Terminating a Registration 2.12 Menu Trees To terminate a subscription, below procedure should be performed on the LWS-BS; 1. Press [Menu] button. 2. Press [Digit 1] (CONFIGURATION submenu), or Select [1. CONFIGURATION] using Navigation up/down key and [OK] Button. 3. Press [Digit 4] (STATION REGISTRATION sub menu), or Select [4. STATION REGISTRATION] using Navigation up/down key and [OK] Button. 4.
PAGE 19
Wireless SOHO Installation and Operation Manual Wireless SOHO Installation and Operation Manual 3 OPERATION INSTRUCTIONS 2.13 System Capacities The LWS system is presently available in one configuration as shown in the Table 2.13.1. 3.1 Call Forward Table 2.13.
PAGE 20
Wireless SOHO Installation and Operation Manual Wireless SOHO Installation and Operation Manual 3.3 Call Transfer 3.2 Call Pick-up Description 3.2.1 Directed Call Pick-Up Line calls can be transferred to other stations in the wireless SOHO system. Calls can be transferred announcing the call (screened) or without an announcement (unscreened). Description A station may answer incoming and transferred intercom, line calls ringing at another station (Call Pick-Up).
PAGE 21
Wireless SOHO Installation and Operation Manual Wireless SOHO Installation and Operation Manual 3.4 Call Waiting/Camp-On LWS-WK 1. Lift the handset or press the [Speaker] button. LWS-WK, does not support answering the incoming call by pressing {Line}/{Station} button in ringing state. Description Call Waiting is used to notify a busy station that a call is waiting. The busy station is notified of the waiting call with a Camp-On tone.
PAGE 22
Wireless SOHO Installation and Operation Manual Wireless SOHO Installation and Operation Manual 2. 3.7 Directory Dial {DND} code (ex.553). Conditions Description A name of up to 12 characters, may be assigned to each Station and System Speed Dial. When assigned, a user of LWS-BS may place an external call to a Station or System Speed Dial using the name. Operation To use Dial by Name: LWS-BS phone 1. Press the [Directory] soft button 2. Select “Station directory” or “System directory”. 3.
PAGE 23
Wireless SOHO Installation and Operation Manual Wireless SOHO Installation and Operation Manual 3.10.2 Hold Recall 3.10 Hold Description 3.10.1 Hold Lines may be placed in a waiting state such that other stations on the system are able to access the Line. If the call remains on hold at expiration of the System Hold Recall Timer, normal Hold Recall will be activated. When a user places a Line call on hold, a hold timer is activated.
PAGE 24
Wireless SOHO Installation and Operation Manual Wireless SOHO Installation and Operation Manual 3.12 Allowed/Denied Number 3.14 Speed Dial 3.14.1 Display Security Description Allow/Deny list has 50 codes and each code can contain up to 20 Digits. This list is applied to the user with Outside Line access restrict (Menu + 1 5 1). As digits are dialed, they are compared to entries using the following rules to allow or deny the call.
PAGE 25
Wireless SOHO Installation and Operation Manual Wireless SOHO Installation and Operation Manual 3.14.3 System Speed Dial 3.15 VSF Integrated Auto Attendant/Voice Mail Description 3.15.1 VSF Commonly dialed numbers can be stored by the LWS-BS station. Up to 800 System Speed Dial numbers are available. Each Speed Dial number can be up to 23 characters in length and may include special instruction codes.
PAGE 26
Wireless SOHO Installation and Operation Manual 3.15.3 VSF Voice Mail 3.15.3.1 Message Storage Description When a station activates Call Forward to the VSF Group, a call is transferred to a VSF mail box. The caller connects to the called station’s User Greeting followed by a beep tone. The remote caller can record a message and hang-up or dial ‘*’ for further options.
PAGE 27
Wireless SOHO Installation and Operation Manual 2. 3. 4. 5. Wireless SOHO Installation and Operation Manual Dial {Voice mail} code(ex. 620). Dial the Mail Box and corresponding password to receive the “Number of Messages” prompt. Dial desired option code. At completion of session, hang-up to return to idle. LWS-WK 1. Lift the handset or press the [Speak] button. 2. Dial {Voice mail} code(ex. 620). 3. Dial the Mail Box password to receive the “Number of Messages” prompt. 4. Dial desired option code. 5.
PAGE 28
Wireless SOHO Installation and Operation Manual 2. Wireless SOHO Installation and Operation Manual The user must assign a password (Authentication code, up to 12 digits) before access to the mailbox will be allowed. 3.15.3.5 Call Forward from VM Description External users can activate or deactivate Call Forward for their station. Pressing ‘7’ while retrieving messages will return the "Mailbox Set Forward" prompt, (“To forward calls to another extension, press one.
PAGE 29
Wireless SOHO Installation and Operation Manual Wireless SOHO Installation and Operation Manual 3.18 Intercom Call Hold 3.20 Night/Weekend mode Description While on an active ICM Call, Users can place the ICM Call on hold; the held station will receive the assigned MOH. The call is placed on Exclusive Hold and recalls at the holding station after the station returns to idle. Description Operation Operation LWS-BS station To activate night/weekend mode: 1. Press [DND] button. 2.
PAGE 30
Wireless SOHO Installation and Operation Manual Wireless SOHO Installation and Operation Manual Conditions 3.24 Feature Code for LWS-BS 1. 2. 3. Maximum count of Received and Dialed call log is 15 each. Missed call has 900 pools. So, 900 missed call can be saved. If the pool is full of the 900 missed call log, the new missed call log can’t be saved. Missed call can be saved to speed dial, but received/dialed call can’t be saved to speed dial.
PAGE 31
Wireless SOHO Installation and Operation Manual Wireless SOHO Installation and Operation Manual 3.25 Feature Code for LWS-WK 4 USEFUL INFORMATION Description 4.1 Trouble shooting User can access Feature Code unlocking several functions.
PAGE 32
NOTICE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.