User's Manual

ManualsBrandsEricsson-LG ManualsElectronicsCDMA Fixed Wireless Terminal

3.4.3 Ring Volume

1. Press + 4( ) + 3( ) in

on-hookstate.

SOUND

Ring Volume

Menu Tree

3.4.4 Ear Volume

1. Press + 4( ) + 4( ) in

on-hookstate.

SOUND

Ear Volume

3.4.5 Key Volume

1. Press + 4( ) + 5( ) in

on-hookstate.

SOUND

Key Volume

3.4.6 Speaker Volume

1. Press + 4( ) + 6( ) in

on-hookstate.

SOUND

Speaker Volume

3.4.7 Message Alert

1. Press + 4( ) + 7( ) in

on-hookstate.

2. Select from Alert Type : (Ring/One--Beep/Light/Off)

AlertTone : (SMS Alarm 11~55) MSG Reminder : (Once/

Every 2Min/Off).

SOUND

Message Alert

3.5 DISPLAY

3.5.1 Banner

Allow you to choose the settings of the LCD banner.

1. If you want to edit banner, press + 5( ) +

1( ) + 1( ) + key in on-hook state.

DISPLAY

Banner My Banner

2. If you want to activate or deactivate the banner, press

+5( ) + 1( ) + 2( )

in on-hook state.

DISPLAY

Banner Banner On/Off

3.5.2 Clock Type

1. Press + 5( ) + 2( ) in

on-hookstate.

2. Select from Type-A_AM/PM, Type-A_24Hour, Type-

B_AM/PM, or Type-B_24Hour.

DISPLAY

Clock Type

3.5.3 Backlight

Allows you to choose the settings of the LCD backlight

1. Press + 5( ) + 3( ) in

on-hookstate.

2. Select from Always Off / For 10 Seconds / For 30

Seconds / Always On,

DISPLAY

Backlight

3.6 SETTINGS

3.6.1 Phone

Auto Time-Out

Setting the length of time the phone waits before

automaticallydialing a number.

1. Press + 6( ) + 1( )+

1( ) in on-hookstate.

Speed Dialing

To speed dialing press the memory number (1 through

300)corresponding to the appropriate memory location

SETTINGS

Phone

Auto Time-Out

Summary of content (10 pages)

PAGE 1
Menu Tree 3.4.3 Ring Volume 1. Press Menu + 4( SOUND ) + 3( Ring Volume ) in Menu Tree on-hookstate. 3.4.4 Ear Volume 1. Press Menu + 4( SOUND ) + 4( Ear Volume ) in on-hookstate. 3.4.5 Key Volume 1. Press Menu + 4( SOUND ) + 5( Key Volume ) in on-hookstate. 3.4.6 Speaker Volume 1. Press Menu + 4( SOUND ) + 6( Speaker Volume ) in on-hookstate. 3.4.7 Message Alert 1. Press Menu + 4( SOUND ) + 7( Message Alert ) in on-hookstate. 2.
PAGE 2
Menu Tree and hold for afew seconds. This function can be used when the speed dialing is set to Enable. DTMF Length This function allows you to the setting of Key beep playback length. 1. Press Menu + 6( SETTINGS ) + 1( Phone )+ 3( DTMF Length ) in on-hook state. Version 1. Press Menu + 6( SETTINGS ) + 1( Phone )+ 4( Version ) in on-hook state. 2. To confirm next page, press Redial/Flash key My Number 1. Press Menu + 6( SETTINGS ) + 1( Phone )+ 5( My Number ) in on-hook state. 2.
PAGE 3
Menu Tree New Lock Code 1. Press Menu + 6( SETTINGS ) + 3( Security ) + 3( New Lock Code ) in on-hook state. Menu Tree Restrict Call You can restrict your outgoing calls including numbers / numbersbeginning with specified digit in the Black List. 1. Press Menu + 6( SETTINGS ) + 3( Security ) + 4( Restrict Call ) in on-hook state. 2. Select among No Restriction, Restriction or Emergency Only and press OK key. 3.
PAGE 4
Troubleshooting 4. Troubleshooting Please check the following items before contacting service center. Remedy • Check that the phone is installed correctly. Phone doesn’t operate at all. Because of noise and cross talking, call status is bad. When I press button to call, can’t hear the dial tone. Phone does not switch on. Calls cannot be received. • Check that the battery is fully charged. • Check that the power is on.
PAGE 5
Important Information 5. Important Information 5.1 Safety Instruction Important Information WARNING / CAUTION To reduce the risk of fire or electric shock, do not expose this unit torain or moisture. Do not use this unit in swimming pools or otherwater bodies. 5.2 Optimal Phone Performance ▶Do not hold the antenna when operating the unit, or operate theunit when someone is within four inches (ten centimeters) of theantenna.
PAGE 6
Important Information battery and ACpower supply. If the unit doesn’t work, please contact serviceprovider immediately. 5.4 Safety Information WARNING ▶Avoid shock or impact. 5.3 Care and Service Before cleaning, always unplug the unit from the wall outlet andremove the antenna (or disconnect the antenna cable). Do not useliquid or aerosol cleaners; use a damp cloth for cleaning.If the unit doesn’t work, do not attempt to disassemble it; contactthe phone service agent for assistance.
PAGE 7
Important Information ▶Avoid using the unit in high Important Information handling of the device could damageit. spilling any liquid on this unit. If It may cause fire, electric shock and the unit gets wet, turn the power off breakdown. Consult your authorized immediately and remove the backup battery and AC power supply. ▶Keep the unit dry. Submersion, humidity and liquids containing minerals may corrode internal electronic circuits.
PAGE 8
Important Information ▶Before using the plug, check the ▶Do not put heavy objects on the power cord. Do not bend the power cord too power voltage may cause fireand much. It maycause fire or electric damage. Example: LSP-450 Input Voltage: 100-240V. ▶Do not plug many power cords into one outlet. It may cause fire or electric shock. ▶Do not remodel the power cord or disassemble it. If the power cord or plug is impaired, do not use it. It may shock. ▶Do not put heavy objects on the power cord.
PAGE 9
General Information 6. General Information 6.1 Main Unit General Information Item Tx Frequency Rx Frequency Channel Bandwidth Tx Power Rx Sensitivity Size (mm) Weight (gms) Operating Temperature LSP-450 Digital: 824 ~ 849 MHz Digital: 869 ~ 894 MHz 1.25 MHz Digital: LOWER: 0.2W ~ UPPER:1W -104 ~ -25dBm 199.6(W) X 122.2(D) X 67.6(H) (with handset) 497 gram (with Battery) -10 ~50℃ 6.
PAGE 10
Regulatory Statements to be included in the Users Guide for Sputnik USA-Federal Communications Commission (FCC) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.