E-BTMU Quick User Guide E-BTMU Quick User Guide
E-BTMU Quick User Guide 1. Introduction E-BTMU is the External Bluetooth module that can offer greater wireless mobility to LIP8000E/IP8800E. LIP-8012E/LIP-8024E/LIP-8040E and IP8820E/IP8830E/IP8840E support Handset or Speakerphone capability for Mobile Calls or WiFi(VoIP) Calls on smart phone as well as Bluetooth headset. They will support these features with an E-BTMU. • Support Bluetooth Headset • Linked with Smartphone via Bluetooth • Select contact information on IP Phone via Phonebook profile 2.
E-BTMU Quick User Guide The following steps are how to install E-BTMU 1) First, connect the cable to Phone with pushing Connector by finger securely. 2) Screw up E-BTMU to Phone. 3) Connect the RJ9 cable between E-BTMU and a Headset port at the rear of Phone.
E-BTMU Quick User Guide 4. Installing E-BTMU (for LIP-8000E Series) After installing E-BTMU and Phone has power, the following appears on the LCD. 1. 2. 3. 4. 5. Headset Smart Phone Settings E-BTMU Upgrade E-BTMU Initialization BACK NEXT OK 4.1 Using Headset 4.1.1 Paring and connecting the device In case of there is no paired device: 1) 2) 3) 4) 5) 6) The message ‘No paired Headset’ is displayed. Set a Bluetooth headset to be discoverable. Press Soft button ‘Search’.
E-BTMU Quick User Guide 5) 6) Press Soft button ‘CONN’ to select the device among the list. The message ‘Connecting Success and Connected’ is displayed if the connection is successful. In case of the device is paired and disconnected: 1) Press Soft button ‘CONN’ to connect the device. 4.2.2 Deleting the device 1) Disconnect the connected smart phone first. 2) Select the device and press Soft button ‘DELETE’. 4.2.3 Disconnecting the device 1) Select the device and press Soft button ‘DISC’. 4.
E-BTMU Quick User Guide 4.3.3 Setting up Smart Phone Reconnection If Reconnection mode is enabled, E-BTMU can be connected to Headset or Smart phone automatically after disconnection. 4.3.4 Showing E-BTMU Information You can see the version & the MAC address of E-BTMU. 4.3.5 Showing Connected Device Info You can check the information of which device is connected to. 4.3.6 Setting up E-BTMU Name You can change the E-BTMU name. 4.3.
E-BTMU Quick User Guide 5. Installing E-BTMU (for IP8800E Series) After installing E-BTMU, Phone has power, and selects the menu, “3. Phone Settings” “13.Bluetooth”, the following appears on the LCD. (The menu number can be changed.) 1. 2. 3. 4. 5. Headset Smart Phone Settings E-BTMU Upgrade E-BTMU Initialization Previous Next OK 5.1 Using Headset 5.1.1 Paring and connecting the device In case of there is no paired device: 1) 2) 3) 4) 5) 6) The message ‘No Paired Headset’ is displayed.
E-BTMU Quick User Guide 1) 2) 3) 4) 5) 6) The message ‘No Paired Smart Phone’ is displayed. Set a smart phone to be discoverable. Press Soft button ‘Search’. The available devices list is displayed. Press Soft button ‘Connect’ to select the device among the list. The message ‘Smart Phone is connected’ is displayed if the connection is successful. In case of the device is paired and disconnected: 1) Press Soft button ‘Connect’ to connect the device. 5.2.
E-BTMU Quick User Guide 5.3.2 Setting up Smart Phone Reconnection If Reconnection mode is enabled, E-BTMU can be connected to Headset or Smart phone automatically after disconnection. 5.3.3 CO Access Code You can set the CO access code for making a call using the phonebook of the smart phone. 5.3.4 Setting up E-BTMU Discoverable If you select E-BTMU Discoverable, your phone is visible on other Smart phone and can be paired with Smart phone as long as this menu is displayed.
E-BTMU Quick User Guide 5) The volume of Smart phone is set as 5. 6. Using Bluetooth Headset If the speaker mode is set as BT and the Bluetooth headset is connected to the phone, you can make or receive a call via Bluetooth headset. 7. FCC Notice Class B FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.