Ethernet Access Residential Unit 111X (1113/1113RF/1114) Please read this manual carefully before operating your set. Retain it for future reference.
CONTENTS 3 Product and personal safety guidelines 8 Regulatory information 11 About EARU 111X 16 Checking package contents 17 Installing EARU 111X 24 Setting EARU 111X
Product and personnel safety guidelines This section contains safety guidelines that you must follow for personal safety and to operate the equipment correctly. LG-Nortel documentation contains precautionary messages and safety procedures that refer to specific tasks or conditions. You must read and follow all precautionary messages before you start to work on the equipment.
Safety standards LG-Nortel products conform to all relevant safety standards.
Handling optical fibers When you work with optical fibers, you must take the following general precautions: • Wear safety glasses when you install optical fibers. • Do not look into the opening of an optical fiber, or the opening of an optical fiber connector, if the optical fiber is active or the unit has the power turned on. • Avoid direct exposure to optical fiber ends or optical connector ends where you can access the laser signal directly. • Clean your hands after you handle optical fibers.
Repairing optical fibers When an accidental break occurs in the optical fiber, do the following: • Report the location of the damaged optical fiber to both the service provider and the field repair personnel. • Power down all laser sources to the optical fiber or disconnect the remote optical fiber end from the laser sources.
CAUTIONS Warranty: Customers can receive repair services for this product under specified conditions. This warranty does not cover failure or damage of the product caused from, using a power adapter other than the one provided, PC failures, data loss, or negligent treatment of the product.
Regulatory information This chapter contains the following information: • a list of global technical standards (electromagnetic compatibility, safety) to which the EARU 111X complies • a country-by-country list of specific regulatory text required by national authorities • information on the regulatory labels affixed to the product (artwork and location on the product) The list of global technical standards provided in this chapter is not exhaustive.
Country-specific regulatory information Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. United States of America This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
The product bears the CE mark as illustrated in figures on page14. A signed Declaration of Conformity is available upon request. Brazil The EARU 111X conforms with the requirements of Anatel Resolution Number 442:2006 (EMC) for a Class B product and Anatel Resolution NR 238:2000 for product safety. Japan (English translation) This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI).
About EARU 111X Thank you for selecting EARU 111X (1113, 1114, 1113RF). The EARU 111X is an equipment working as a modem in WDM-PON (Wavelength Division Multiplexing - Passive Optical Network). This product multiplexes 125Mbps to 100Mbps Fast Ethernet signals (maximum 4ea) into WDM-PON optical signal. This product will allow you to use the different services such as VoD (Video on Demand), EoD (Education on Demand), IP-TV, POTS, RF Overlay and High speed internet access available from your provider.
Bottom view EARU 1113 EARU 1114 EARU 1113RF ⑫ ⑨ ⑦ ⑧ ⑩ ⑥ ⑪
LEDs and Port functions Number Indicator Usage Color Power ① PWR display ON : Power OK Green Blink : Firmware Downloading Fail ② FAIL display Function ON : Alarm event Red Blink : Temperature alarm Blink (by turns) : CPU booting ①+② Blink (at once) : Main application loading Combina Green OFF, Red ON : Boot Fail tion Green OFF, Red OFF : Check power supply L ③ E Battery ON : Battery interface power normal (operate Display from utility line) OFF : Battery interface power OFF (ONT BAT
Labels Indoor type ① ② ⑤ ③ ④ Number item Label Location PEC & SN Label 1 Rear 9.652mm x 27.94mm CLEI Label 2 Rear 9.652mm x 27.94mm LGNT Barcode 3 Rear 6.5mm x 35mm Hazard level 1 4 (per IEC 60825-2) Front 9.5mm x 15mm Regulatory 5 Rear 17.04mm x 80.
Specifications Item Dimensions in mm Power Ambient Temperature Humidity Specification 197.39(w) x 182.
Checking package contents Before installing this product, ensure all parts are provided. Checking what is in the package Check the package to make sure the following items are included. Indoor type (EARU1113, 1114, 1113RF) EARU 111X Main body User manual Pedestal (for desktop mounting (option)) Wall mouniting kit (Option) No. Item Name Quantity Item Number 1 WALL MOUNTING PANEL 1 N04697-00 2 SCREW(BN82429-3-8) 4 P04932-00 3 SCREW(BN695-5.
Installing EARU 111X This section provides the specifications for EARU 111X installation, it also describes how to install it and connect it into a network. Installation environments Install the EARU 111X in an environment where the following specifications are met. - Operating temperature: 0℃ to 50℃ - Relative humidity: 20% to 80% - Power consumption: Max 1.4A @12Vdc - Input voltage: 12V 2A Preparing for installation Before you install the EARU 111X, review following information.
Installing the product mounting method Desktop mounting (EARU1113, 1114, 1113RF) Step1. Insert the lower side projections of the pedestal to the lower side holes of main body. Lower holes Lower projections Step2. Push upper side projections of pedestal toward the upper side holes of main body till they join.
Wall mounting (EARU1113, 1114, 1113RF) No. Item Name Quantity Item Number 1 WALL MOUNTING PANEL 1 N04697-00 2 SCREW(BN82429-3-8) 4 P04932-00 3 SCREW(BN695-5.
Grounding STEP1: Unfasten the grounding screw on the rear side of the EARU 111X (see following picture) STEP2: Attach the 1-hole lug using the screw that was removed in STEP 1. A1-hole #10 compression with 3.5mm(0.14inch) hole spacing is acceptable for the EARU 111X. The grounding connection is suitable for terminating a #18 AWG wire.
Connecting power cable For EARU111X Connect the Battery plug to BATT interface. BATT interface Mark Signal Name Description +12V + Voltage + Voltage GND - Voltage - Voltage RTN Signal Return Signal Return ON On Battery Low when operating from utility line. Open when operating from battery. Low when battery is charged. Open REP Replace Battery when battery fails the Self Test. Low when battery is present. Open MIS Battery Missing when battery is missing.
Connect the DC Power Adapter to the Power connection if you want to use another power connecting methode instead of BATT interface.
Connecting optical cable Check that the power switch on the EARU 111X is in the off position. Insert the SC APC connector into the optical port of the EARU 111X . Insert the other end of the APC optical cable into the optical outlet on your wall.
Connecting Ethernet cable Connect Ethernet cables to the RJ45 Ethernet port numbered 1 to 4 in EARU 111X . Connect the other side of the Ethernet cable to the Ethernet port of your home device. Connecting Telephone cable Connect Telephone cables to the RJ11 POTS port numbered 1 to 4 in EARU 111X. Connect the other side of the POTS cable to the POTS port of your home Telephone.
FAIL LED DATA LED Checking the connection status of user devices When EARU 111X is power-fed, the Green and Yellow LEDs should be on. The green LED is the data indicator. It blinks when data is being transmitted or received. The Yellow LED is the link indicator. It lights up with a 100Mbps connection. If there is a 10Mbps connection (a 10BaseT connection), the Yellow LED is off.
Setting EARU 111X When you select to receive WDM-PON service, you do not have to make additional settings on the product to use it. Using Internet With a web browser such as the Internet Explorer on your PC, you can surf freely through the Internet. Note EARU 111X does not require any access program. Use your regular internet browser.
