Ethernet Access Residential Unit 111x (EARU 1112/EARU 1113) Please read this manual carefully before operating your set. Retain it for future reference.
CONTENTS 2 Product and personal safety guidelines 7 Regulatory information 10 About EARU 111x 14 Checking package contents 15 Installing EARU 111x 19 Setting EARU 111x 20 Open Source Software Notice
Product and personnel safety guidelines This section contains safety guidelines that you must follow for personal safety and to operate the equipment correctly. LG-Ericsson documentation contains precautionary messages and safety procedures that refer to specific tasks or conditions. You must read and follow all precautionary messages before you start to work on the equipment.
Safety standards LG-Ericsson products conform to all relevant safety standards.
Handling optical fibers When you work with optical fibers, you must take the following general precautions: • Wear safety glasses when you install optical fibers. • Do not look into the opening of an optical fiber, or the opening of an optical fiber connector, if the optical fiber is active or the unit has the power turned on. • Avoid direct exposure to optical fiber ends or optical connector ends where you can access the laser signal directly. • Clean your hands after you handle optical fibers.
Repairing optical fibers When an accidental break occurs in the optical fiber, do the following: • Report the location of the damaged optical fiber to both the service provider and the field repair personnel. • Power down all laser sources to the optical fiber or disconnect the remote optical fiber end from the laser sources.
CAUTIONS Warranty: Customers can receive repair services for this product under specified conditions. This warranty does not cover failure or damage of the product caused from, using a power adapter other than the one provided, PC failures, data loss, or negligent treatment of the product. For questions or to report damage or failures contact your service provider.
Regulatory information This chapter contains the following information: • a list of global technical standards (electromagnetic compatibility, safety) to which the EARU 111x complies • a country-by-country list of specific regulatory text required by national authorities • information on the regulatory labels affixed to the product (artwork and location on the product) The list of global technical standards provided in this chapter is not exhaustive.
Country-specific regulatory information Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. United States of America This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
• EN 300 386 V1.3.
The product bears the CE mark as illustrated in figures on page14. A signed Declaration of Conformity is available upon request. Brazil The EARU 111x conforms with the requirements of Anatel Resolution Number 442:2006 (EMC) for a Class B product and Anatel Resolution NR 238:2000 for product safety. Japan (English translation) This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI).
About EARU 111x Thank you for selecting EARU 111x (1112, 1113). The EARU 111x is an equipment working as a modem in WDM-PON (Wavelength Division Multiplexing - Passive Optical Network). This product multiplexes 125Mbps to 100Mbps Fast Ethernet signals (maximum 4ea) into WDM-PON optical signal. This product will allow you to use the different services such as VoD (Video on Demand), EoD (Education on Demand), IP-TV, POTS and High speed internet access available from your provider.
Rear view EARU 1112 Optical port Ethernet port 1~4 Optical port Ethernet port 1~4 Power(12V) EARU 1113 Power(12V) Telephone port Rear port functions Indicator Color Function Power Power This is the port for the power adapter.
Bottom view 1 3 2 Number item Label Location PEC & SN Label 1 Rear 9.652mm x 27.94mm Hazard level 1 2 (per IEC 60825-2) Front 9.
Specifications of EARU 111x Item Label Dimensions in mm 203(w) x 150(d) x 35(h) Power DC 12V, 1A Ambient Temperature 0℃ to 50℃ Humidity 20% to 80% Data rate 100Mbps SC/APC (optical), RJ45 (Ethernet), Connectors RJ11(POTS) LED indicators Power, Alarm, Data
Checking package contents Before installing this product, ensure all parts are provided. Checking what is in the package Check the package to make sure the following items are included. Main body of EARU 111x Dedicated C clamps Cradle for EARU 111x for EARU 111x Power cable User Manual adator of EARU 111x for EARU 111x If there is anything missing, please contact your Service provider. Note Use the power adapter provided with the product.
Installing EARU 111x This section provides the specifications for EARU 111x installation, it also describes how to install it and connect it into a network. Preparing for installation Before you install the EARU 111x, review following information.
Installing the product This section describes how to: 1. Select a resting mode 2. Connect power cable 3. Connect optical cables 4. Connect POTS cables(RJ11) and Ethernet cables (RJ45) 5. Turn on the power of EARU 111x 6. Check the connection status Let’s see detailed descriptions on each step. Select a resting mode Select a resting mode between horizental mode and vertical mode according to the place where the EARU 111x is installed.
Connecting optical cable Check that the power is on.. Insert the green APC connector, into the optical port of the EARU 111x. Insert the other end of the APC optical cable into the optical outlet on your wall. Only green colored APC connector should be used. Other connector Types will not work properly. Connecting Ethernet cable Connect Ethernet cables to the RJ45 Ethernet port numbered 1 to 4 in EARU 111x (WDM-PON ONT Indoor).
Connecting power cable & checking the power status Make sure that both ends of the optical cable and the Ethernet cables are installed. And insert the connector of adapter, into the port of the EARU 111x. Make sure that the PWR LED (green) turns on. Do not pull on the power cable or adapter. This can cause failure or damage to the EARU 111x.
Setting EARU 111x When you select to receive WDM-PON service, you do not have to make additional settings on the product to use it. Using Internet With a web browser such as the Internet Explorer on your PC, you can surf freely through the Internet. Note EARU 111x does not require any access programs such as ACEMAN_Pro, Enternet 300 and WinPoET; you can directly access the Internet.
Open Source Software Notice The following open source software used in this product: o o o o o o o o o o uclibc 0.9.29 MIPS Linux kernel, version 2.6 STP bridge in kernel BusyBox 1.0.0 toolset iptables‐1.3.8 Telnet server, login Ftp server: bftpd 1.0.24 Tcpdump and libpcap dproxy: dproxy‐nextgen Iproute2: iproute2‐2.4.
Copyright © 2010 LG-Ericsson Co., Ltd. All Rights Reserved. Copyright of this manual belongs to LG-Ericsson Co., Ltd. Reproduction, distribution or revision of part or all of contents in this manual in any form without written permission of LG-Ericsson Co., Ltd. is prohibited. The information in this manual is subject to change for the reason of function improvement, design alteration, etc. without any prior notification. http://www.lgericsson.com P/N : SM0-000-S00527 Feb/2011/Ver 1.
