User's Guide LX HD Wall Mount Pivot < 50 lbs. (22.7 kg) Features & Specifications - 5˚ ± 20˚ + 15˚ English For the latest User Installation Guide please visit: www.ergotron.com English, Español, Français, Deutsch, Nederlands, Italiano, Svenska, 日本語, 汉语 www.ergotron.com | USA: 1-800-888-8458 | Europe: +31 (0)33-45 45 600 | China: 400-120-3051 | Japan: japansupport@ergotron.com 888-45-198-W-01 rev.
Components A B C D 2x 1 1x 1x E 4x 1x M5 x 20mm 2x 4x 2 M8M5 Converter M8 x 80mm 1x 4x 3 2.5mm M4 x 12mm 1x 4 1x 4x 4x 4x 5 M5 x 7mm 1/8" 10-24 x 5/8" M4 x 8mm 4x M5 x 12mm 4x M6 x 12mm Tools Needed Concrete Wall Mounting Ø 3/8” (10mm) Wood Stud Mounting 13mm Ø 3/16" (5mm) 2 Stud Finder 1 Important! You will need to adjust this product after installation is complete. Make sure all your equipment is properly installed on the product before attempting adjustments.
1 WALL PLATE MOUNTING INSTRUCTIONS 1.125" (28.6mm) WARNING: Ensure that the wall structure is capable of supporting four times the total weight of mounted equipment. Mounting to wall surfaces that do not meet this criteria may result in an unstable, unsafe condition which could lead to personal injury and/or property damage. Consult a construction professional if you have any doubt about what this means in regard to your particular application. 6" (152mm) 4.
Wood a b c d Ø 3/16" (5 mm) e 2x f M8 x 80mm CAUTION: Make sure the wall mount bracket is level, flush and snug to the wall surface. DO NOT OVERTIGHTEN THE BOLTS. 13 mm 6 4 of 12 888-45-198-W-01 rev.
Wood Stud Mounting a b c Ø 3/8" (10 mm) WARNING: Mounting holes must be at least 3-1/8” (80mm) deep and must be located within solid concrete, not mortar or covering material. If you drill into an area of concrete that is not solid, reposition mounting holes until both anchors can be fully inserted into solid concrete! 3-1/8" (80 mm) 888-45-198-W-01 rev.
Wood Stud Mounting 2x M8 x 80mm d e 2x f 1 13 mm 2 CAUTION: Make sure the wall mount bracket is level, flush and snug to the wall surface. DO NOT OVERTIGHTEN THE BOLTS. WARNING: Anchors that are not fully set in solid concrete will not support the applied load resulting in an unstable, unsafe condition which could lead to personal injury and/or property damage. Consult a construction professional if you have any doubt about what this means in regard to your particular situation.
2 To Stop Portrait/Landscape Rotation insert Screw M4 x 8mm 360° 3 0° Check size of TV/Monitor hole pattern TV/Monitor Hole Pattern Sizes VESA Adapter Configurations 100mm (3-15/16”) 75mm (2-15/16”) 75mm (2-15/16”) 100mm (3-15/16”) 200mm (7-7/8”) B 100x200mm 8 100mm (3-15/16”) A 75x75mm 100x100mm 9 200mm (7-7/8”) 200x200mm 200mm (7-7/8”) C 9 200mm (7-7/8”) 888-45-198-W-01 rev.
3 Mount Type A TV/Monitor to Arm A 75x75mm 100x100mm 100mm (3-15/16”) 75mm (2-15/16”) 100mm (3-15/16”) 75mm (2-15/16”) 75 x 75mm 100 x 100mm 4x 4x M4 x 12mm M4 x 12mm 4 8 of 12 11 888-45-198-W-01 rev.
C 200x200mm B 100x200mm D 200x100mm 100mm (3-15/16”) 200mm (7-7/8”) 100mm (3-15/16”) 200mm (7-7/8”) 200mm (7-7/8”) 3a 200mm (7-7/8”) Mount VESA Adapters to Arm based on TV/Monitor hole pattern size (B, C, or D) . 4x 3b M5 x 7mm Mount Type B, C, or D TV/Monitor to Arm 4x M4 x 12mm 4x M5 x 12mm 4x M6 x 12mm NOTE: To reduce M8 holes for use with M5 screws, or if you have a model with Samsung holder rings, follow the M8M5 KIT instructions on the next page. 10 888-45-198-W-01 rev.
M8M5 KIT Instructions NOTE: Follow this step only if your TV/monitor has M8 holes which need to be reduced to M5. Install M8M5 reducer bushing to TV/Monitor and use M5 x 20 mm monitor screws to secure. 4x 4x M5 x 20mm TV/Monitor Mounting M8 size hole NOTE: Follow this step only for Samsung models using the holder ring. Install M8M5 reducer bushing to TV/Monitor then use M5 x 20 mm monitor screws and Samsung holder ring to secure.
4 ATTACH TO WALL MOUNT BRACKET 5 Adjustment Step Important! You will need to adjust this product after installation is complete. Make sure all your equipment is properly installed on the product before attempting adjustments. This product should move smoothly and easily through the full range of motion and stay where you set it. If movements are too easy or difficult or if product does not stay in desired positions, follow the adjustment instructions to create smooth and easy movements.
b Pan – Side-to-side 2.5mm Increase Friction If this product moves too easily, then you'll need to increase friction: Decrease Friction ± 20˚ If this product is too difficult to move, then you'll need to decrease friction: Set Your Workstation to Work For YOU! Learn more about ergonomic computer use at: www.computingcomfort.org Height Position top of screen slightly below eye level. Position keyboard at about elbow height with wrists flat.
