Owner Manual

ManualsBrandsERGOBOND ManualsDesksCompact™ Standing Desk

Tip 1: Slight incline the desk to move easily move the desk using the wheels.

Tip 2: The basket can be use to manage cable avoid storing heaving things.

Tip 3: Frontal base can be adjusted to achieve stability on uneven surfaces.

Compact Gas Spring

Max Dynamic Load：15.4 LBS (7KG)

Max Static Load：100LBS (45KG)

Life duration：10000 time

Model: XD9101

IMPORTANT：READ THE OWNER’S MANUAL

BEFORE ASSEMBLING

Instruction Manual

ergobond.com

Summary of content (4 pages)

PAGE 1
Tip 1: Slight incline the desk to move easily move the desk using the wheels. Compact TM Gas Spring Instruction Manual Tip 2: The basket can be use to manage cable avoid storing heaving things. Tip 3: Frontal base can be adjusted to achieve stability on uneven surfaces. Model: XD9101 IMPORTANT：READ THE OWNER’S MANUAL BEFORE ASSEMBLING ergobond.com Max Dynamic Load：15.
PAGE 2
Table of contents Introduction Step 2: Using both hands control the height by pushing down or letting the desk rise. 1 Safety Warnings / Maintenance 2 Hardware / Tools / Parts 3 Assembly 4-5 Operational Instructions 5-6 Step 3: Release the handle to fix at the desired height. Important Tip: Raise and lower the desk at least three times before loading the desk with additional weight. The movement helps the lubrication of the desk to warm up before the first usage.
PAGE 3
SAFETY WARNINGS - URGENT PLEASE READ THIS SECTION C (1) D Step 3: Using two M6 x 12 Allen Screws C and the 4 mm Allen Wrench D tighten the Basket (4) to the underside of the Desktop (1) . We Want You To Safely Use This Product 1. Read the entire manual before assembling and using this equipment. Safe use can only be achieved if the equipment is assembled, maintained and used correctly. All users of the equipment must be informed of all warnings and precautions. (4) 2.
PAGE 4
Hardware Assembly Note: The images do not represent the actual size. Tip: Only remove the hardware and tools from the labelled packaging when needed. Note: Before assembly, please check all parts carefully. Estimated Assembly Time : 10 minutes Step 1: While the Desktop (1) is still upside down, slide the plastic ring down, insert into place. A. M8 x 20 Allen Bolt 4pcs B. M6 x 30 Allen Bolt 4pcs. (3) C. M6 x 12 Allen Bolt 4pcs.