Digital Audio Recorder (EVR-150)
Thank you for choosing Eratech s exciting new digital product, the EVR-Digital Audio Recorder(EVR-150). For optimum performance please read the User Guide before operating the recorder.
Highlights and features Components and accessories Player controls Mode menus Power sources Power On/Off Playback/Stop Hold On Hold Off Search and Seek Volume controls Setting Menu Mode change 4 5 6 Listening to Music with the Internal Speaker 28 Setting the Equalizer 29 Setting the Repeat Function 30 7~8 9~11 12 12 12~13 Changing FM Channels Storing FM Channels Overwriting FM channels Listening to Preset FM Channels Recording from FM Rradio Listening to Recorded Broadcasting 31 Deleting Items Store
The EVR-150 Digital Audio Recorder is a portable digital audio player as well as Digital Audio Recorder. Users can save recorded voices as MP3 files, making the EVR-150 a very useful/powerful tool for saving business discussions, meetings, consultations, telephone/mobile phone conversations, school lectures, foreign language lesson/education tapes, FM broadcasts, as well as instaneous ideas and interviews. You can replay high quality sounds or messages from the device repeatedly and/or save them on your PC.
EVR-150 Primary Settings User Guide Stereo Earphones Ni-MH 1.2V Rechargeable Battery External Microphone Telephone Recording Adapter Telephone Recording Cable Line in/out Cable USB Cable PC install CD disc - Quick Charger - Hands free Carrying Case Accessorries are subject to change without notice for improvements.
Slide the battery cover in the direction of the arrow. Open the battery cover in the downward direction as the picture indicates. Insert the rechargeable battery as shown in the picture. Adjust the (+)(-) polarities of the batteries in the compartment. Close the battery cover. Note The battery life is 10 hours maximum if the earphone is used.
You can recharge the player by connecting it to a USB port from the PC. It is possible to recharge even if the battery is not fully discharged. (No need for discharging) To charge is available on VOICE, AUDIO, FM playback and recording mode. Connect the USB cable to USB port of the PC when the PC is powered on. To power on the digital audio recorder. Connect the USB cable to the USB port of player. Press MODE button to return from menu and display ( ) icon on LCD.
It s possible to recharge even if the battery is not fully discharged. Place the rechargeable battery on the quick charger as shown in the picture. Adjust the (+)(-) polarities of the batteries in the compartment. Insert the quick charger in a wall outlet (110V). (LED turns on red light during recharging and turn off light when recharging is completed.) The battery takes 2 hours to fully-recharge. When Battery icon on LCD of the player blink, please recharge the Ni-MH rechargeable battery.
To power on, press the REC button for 2 seconds. Note If the REC button is pressed longer than 2 seconds, the EVR-150 will start recording automatically. To power off, press the PLAY/STOP Button 2 or more seconds. Note If yor power on the main setting, the last setting (MODE) will be displayed on the LCD. Pressing the PLAY/STOP button will play a file when the EVR-150 is powered on. Note The EVR-150 is automatically powered off after 3 minutes of non-use. Press the MODE button to go to the Menu.
If display "HOLD ON" on LCD, exit from menu with pressing MODE button. If press any button except "MODE", display "KEY HOLD " on LCD. If press MODE button ,display " PRESS / TO HOLD OFF " on LCD. When set 'HOLD ON" , press MODE button shortly. To set "HOLD OFF", press PLAY/STOP button. If press MODE button for over 2 seconds , mode may be changed . To set HOLD OFF, press MODE button shortly.
During playback in the Stop mode, press the FF/REW button to navigate to the desired file. Press and hold the FF/REW button until the desired time, the EVR-150 will start playback from that point.(SEEK Function) Adjust the volume by pressing (+)/(-) buttons. (If press (+)/(-) for a long time, volume level continuously goes up.) With earphone use the volume level is controllable from 0 to 30. With internal speaker use the volume level is controllable from 0 to 24.
The EVR-150 has 5 MODES: VOICE MODE - FM RADIO MODE - FM PLAY MODE ERASE MODE - AUDIO MODE. To navigate to the next mode, press the MODE button for 2 seconds while the EVR-150 is in the STOP state. VOICE MODE Voice Recording and Playback. FM RADIO MODE User can save FM frequencies and record/listen to FM broadcasting as well. FM PLAY MODE Play back recorded FM radio and/or broadcasting. Note This mode is available only if a recorded FM broadcast/music file already exists.
Before recording, set the Internal/External Microphone, Mono/Stereo, Quality and VOR function(s). For instructions on setting these functions, refer to pages 21~23.
Use the same method as using an external microphone: set [MENU]-[SOURCE]-[MIC]. Connect the audio cable to the microphone jack( ) of the EVR-150( ). Connect the other head of the audio cable to telephone adapter( ). Connect the incoming telephone line(a service line) to the telephone adapter( ). Connect the telephone cable between the telephone and telephone adaptor( ). To record a telephone conversation in VOICE MODE(or AUDIO MODE), press the REC button to start recording.
If the volume level of your external device is too high, it can cause some noise/distortion. Before recording, set [MENU]-[SOURCE]-[LINE IN]. Connect the audio cable to microphone jack ( )of the EVR-150 and connect the other head of audio cable to the earphone jack of the audio devices. Press the REC button to start recording. To pause recording, press the REC/ Pause button. To stop recording, press the PLAY/STOP button.
If an audio cable will be used for recording purposes set the MODE prior to recording. Quickly press the MODE button. Press the FF/REW button to move to the M/S menu and then press the PLAY/STOP button. Press the FF/REW button to choose either MONO or STEREO, and then press the PALY/STOP button. Press the MODE button to exit the menu. Make sure the icon on the LCD. If you select [MENU]-[SOURCE]-[MIC] and move to M/S MODE, MONO!! message will appear on the LCD.
It is recommended that recording quality be selected prior to actual recording.
To automatically pause recording when there is no sound or voice present (and prevent unnecessary recording), use the VOR function. This function maximizes recording time and is very useful for recording telephone conversations and lectures. User can set the VOR time. Quickly press the MODE button. Press the FF/REW button to move to SYSTEM menu, and then press the PLAY/STOP button. Press the FF/REW button to move to VOR menu, then press the PLAY/STOP button and select OR ON.
This function is to pre-set recording mode used frequently. Without setting recorde mode every time , User can instantly record by pressing RECORD button for a long. If select MIC,set "MONO" automatically. Press MODE button ,to enter menu. Press FF/REW button to move to BUTTON MENU, select BUTTON MENU with PLAY/STOP button. Go to MIC mode with FF/REW button and select with PLAY/STOP button. (If select MIC, Set "MONO" automatically.) Select quality of the sounds with FF/REW and PLAY/STOP.
If Select Line-in ,set STEREO automactically. As same recording from internal mic, go to [MENU][Button] and select LINE IN. If select [LINE IN] , set STEREO automatically. To set MONO , select MONO with FF/REW and PLAY/STOP button. Select quality of the sounds with FF/REW and PLAY/STOP. After select ON/OFF with FF/REW button, exit the menu with MODE button. If select OFF, this function isn't operated . If exit menu during setting , set the previouse recording mode. When pre-set recording mode.
User controllable play speed during playback. Press the MODE button 2 seconds to change to VOICE MODE(or AUDIO MODE, FM PLAY MODE). Press the FF/REW button to select the desired file and then press the PLAY/STOP button to play. (To stop, press PLAY/STOP button again.) To change the play speed, press the MODE button up to 2 seconds during playback. The SPEED icon will be displayed on the LCD. To select your desired speed, press (+)(-). To cancel the play speed setting, press the MODE button 2 seconds.
User can set REPEAT method.
Play and listen to the specific section repeatedly. Press the PLAY/STOP button to play the selected file in VOICE MODE. Press the REC button to set the start point(the beginning of a section). Press the REC button once again to set the end point(the ending of a section). The specific section you selected will be played repeatedly. Press the REC button again to stop repeat the segment mode.
In VOICE MODE, the EVR-150 is automatically switched to the available sound output (earphone of internal speaker) depending on whether or not the earphone is connected to the EVR-150. For example, if the earphone is disconnected from the EVR-150, the sound output is automatically switched to the internal speaker. But, in AUDIO MODE, the internal speaker should be set ON or OFF manually as follows: the Press MODE button quickly in AUDIO MODE to move to the MENU.
Press the MODE button in AUDIO MODE. Press the FF/REW button to move to EQ and then press the PLAY/STOP button to select. Press the FF/REW button to move to the desired equalizer mode and press the PLAY/STOP button to select. Press the MODE button to exit the MENU. Make sure the EQ icon is on the LCD.
User can set repeat method. Press the MODE button. Press the FF/REW button to navigate to REPEAT, then press the PLAY/STOP. Press the FF/REW button to select NORMAL-ONEALL-INTRO and then press the PLAY/STOP button. Press the MODE button to exit the menu. The REPEAT icon on the LCD should be lit.
In FM RADIO MODE, press the FF/REW button to select a channel. Press the FF/REW button two seconds (or longer). The frequency will go up/down and will seek channels automatically (Auto-seeking function). After selecting a channel press the MODE button. SAVE CH 01 will appear on the LCD display. Press the PLAY/STOP button. Press the FF/REW button to select YES , then press the PLAY/STOP button to store channel. The EVR-150 has the capacity to store 20 channels.
Once the preset channels have been selected, press the PLAY/STOP button to change the channel. Press the REC button to record FM broadcasting while listening to FM radio. To pause recording, press the REC button again. To resume recording, press the REC button once. To stop recording, press the PLAY/STOP button. Recorded FM radio file numbers will automatically be stored in the order in which they were recorded.
Press the MODE button for 2 seconds to change from FM MODE to FM PLAY MODE. Press FF/REW button to select the appropriate file. Press the PLAY/STOP button to play recorded FM radio file. Repeat, A B repeat, EQ function is available in the FM PLAY MODE (as it is in AUDIO MODE). Recording is not available in FM PLAY MODE.
Press the MODE button for 2 seconds to change to ERASE MODE. Press the Volume(+)(-) button to select the folder erased (VOICE FOLDER, AUDIO FOLDER, FM FOLDER.) Press the FF/REW button to move to ERASE FILE and then press the PLAY/STOP button.
Pentium 133MHz or faster . Windows 98/ME/2000(PRO) CD-ROM drive More than 20MB free hard disk space Sound Blaster Compatible USB port Place the installation CD into your CD-ROM drive. The installation dialogue box (VR Manager InstallSheild Wizard) will be displayed on Monitor. If the dialogue box does not display, double click [Start]-[My Computer]-[CD-ROM][autorun.exe] on the PC. Reboot your PC when the installation is complete.
connect the provided USB cable to a USB port of your PC. Power on the EVR-150 and open the USB rubber cap, then connect the USB cable to the USB port. Make sure the USB CONNECT message appears on the LCD display. Connect the USB cable to the player in the STOP state. Failure to do so can result in malfunction. Disconnect any audio cables from the EVR-150 before connecting the USB cable to the PC.
When you connect the player to PC without installment the VR manager, You should install the USB driver. Up to personnel computer , the procedure of installment may be different. The procedure is as following. 1) 2) click! click! Select like above illustration and click the NEXT. 3) 4) click! click! Select Click and like above illustration . and Select the drivers folder in CD. Click the NEXT.
The procedure is as following. 1) 2) click! click! Select like above illustration and click the NEXT. 3) 4) click! Select click! like above illustration and click the NEXT.
The procedure is as following. 1) 2) click! Select like above illustration and click the NEXT. 3) 4) click! Select like above illustration and click the NEXT.
Refresh the information of the EVR-150 Manager. Download files to the EVR-150 from the PC. Upload files to the PC from the EVR-150. Change the order downloaded files for playback. Delete files from the EVR-150. Format the internal memory of the EVR-150. Display audio files only. Display all files. E-mail the file (selected from the PC). Confirm the information of the EVR-150 Manager. Double click the VR Manager Icon to execute the manager program.
Select the Music folder from the VR Manager. Select the file to be downloaded from the PC, then click the download button. store folder file Download files Upload Audio folder Voice folder FM folder PC Music O X X X Voice X X X O FM radio X X X O Others O X X O The DOWNLOADING status window will be displayed. To download a file to the player, select [File]-[Download] or select the file by dragging and dropping.
Select a folder to save uploaded file. Select the file to upload from each folder. then click upload button. The UPLOADING status window will be displayed. Do not remove/disconnect the USB cable from the EVR-150 during downloading/uploading.
Select a folder to delete file. Select the file to be deleted and click the DELETE button. The REMOVING status window will be displayed. @@@@hf @@@@hf @@@@hf @@@@hf @@@@hf @@@@hf @@@@hf @@@5hf @@@Hhf @@@?hf @@@Lhf @@@1hf @@@@hf @@@@hf O2@?g3@@5g?@@@e W2@@5?gV40Yg?@@@W2 7@@@ J@@@@@ 3@@@)K ?W&@@@@@ N@@@@@6XhfO&@@@@e ?3@@@@@)K?hO2@@@@@5e ?V4@@@@@@6K?e?O2@@@@@@@0Ye @@@@@@@@@@@@@@@@@@@?f 3X@@@@@@@@@@@@?@@@@?f N@@@@@@@@@@@V4@0M?g ?@0M?I4@@@@@hf 43 Erased/deleted files can not be recovered.
1. Safety Precautions Do not use or place product : - In high temperature(above 60 ) - Inside a car with closed windows(during the summer) - In areas with high humidity(such as bathrooms) - In direct sunlight or near the heaters - In dusty places Do not drop the product. The electronic components are delicate and may be rendered useless if mishandled. Do not repair, open or remodel the product. Do not operate the product when driving a car or walking.
If you experience diffficulty operating the EVR-150, refer to the problem-solving directions below before calling customer service. No display on LCD/ The player does not function. Recording function isn t operable. 1. Check the battery and recharge if necessary. 2. Make sure the battery is properly inserted to match the (+),(-) polarities. 3. Make sure the battery cover is properly shut. Remove the battery and wait awhile before replacing. 1. Check the status of the HOLD switch. 2.
CATEGORY MP3/WMA ITEM Channels Stereo Frequency Range 20Hz ~ 20KHz Earphone Out 6mW(L) + 6W(R) : 16 , Max. Volume S/N Ratio 85dB (with A-weighting filter) Frequency Range FM Radio SPECIFICATION 87.5 ~ 108MHz (Korea/USA/Europe) 76 ~ 90MHz (Japan) Earphone Out 6mW(L) + 6mW(R) : 16 , Max. Volume S/N Ratio 55dB (with A-weighting filter) Receiver Type Earphone cord antenna Time (mono) 128MB Max. 2180min(LQ), Max. 1090min(MQ), Max. 540min(HQ) 256MB Max. 4.370min(LQ), Max. 2.184min(MQ), Max.
FCC Compl i ance St at ement s Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
www.eratech.co.kr / www.beatsounds.co.kr / www.beatsounds.