HYPER COM POINT-OF-SALE 900 MHz Wireless POS Terminal Interface System Operation and Installation Manual Draft Introversion December 5, 1997
Hyper com Corporation 2851 West Kathleen Road Phoenix, Arizona 85023 USA Corporate Telephone: (602) 504-5000 Corporate Fax: (602) 866-5380 TRADEMARKS: Hyper com has attempted throughout the 900 MHz Wireless POS Terminal Interface System Operation and Installation Manual to distinguish proprietary trademarks from descriptive terms by following the capitalization style used by the manufacturer. Every effort has been made to supply complete and accurate information.
HYPERCUBE CORPORATION 1897. All Rights Reserved. Hyper com, the Hyper com Logo, and the Integrated Enterprise Network are registered trademarks of Hyper cam Corporation. « This document is proprietary to Hyper com Corporation, and is intended solely for the contractual usé of Hyper com customers.
Tahoe of Contents A Chapter 1 Introduction” Function Blocks . : Operation Basic System... Lo... Basic System installation . . .. Extending Basic Coverage Area . installing Extended Basic Coverage Area . .
List of Figures ~ Basic configuration 23 Extending basic coverage area .. L285 Large area coverage 2-8 Premises wiring diagram nee eee edema aaa ase 7 Basic system example ..
Preface OH The! S00 MHz Wireless POS Terminal Interface System Operation and Installation Manual isa com apprehensive guide to working with the Hyper com 800 MHz Wireless POS This bock is designed fo provide — relevant to the Hyper com equipment and is divided into the following chapters: .
Genera! Product Description and Operation Function Blocks The concept for Hyperion's 800 MHz wireless POS terminal interface system offers a high level of customer convenience and reduces the time required to process a POS transaction. Because customers see the process, they have control of the financial transaction and feet an added sense of security.
Chapter 1 The operating distance between a terminal transceiver and a peripheral POS terminal is greatly affected by their environment. Obstructions such as walls and furniture as well as outside interfering signals reduce the operational range. Hyper com software communication protocols have been implemented within the wireless POS terminal interface system that should reduce these effects.
installation Basic SYSTEM The example in Figure 4-1 shows the basic configuration. The terminal transceiver should be less than 100 feat from the peripheral terminal device. This short range reduces the possibility of interference with other communication systems using the same radio spectrum. Causing such interference is a violation of FCC regulations. HOST SINGLE UNIT CABLE PN: 020123.002 ~~ TERMINAL TERMINAL SS TTo00T <4 TRA Tier fe — LOE. 5 17TH 18 PERIPHERAL TERMINAL DEVICES LCE.
Chapter 2 Basic System Installation The installation of the basic system wireless hardware is quite simple. Step-by-Step, Te install the basic wireless system: 1. Ensure the host terminal is properly configured and connected for use as a standard POS terminal. See the manual provided with the host POS terminal. insert the ale end of the single unit Hyper com adapter cable, Hyper com PIN 810170-001, into the PIN pad port of the host terminal.
Installation Extending Basic Coverage Area If the basic system does not cover enough space or major gaps exist in the coverage, you can extend the area covered. The example in Figure 4-2 shows how to extend coverage or fill in gaps by adding a terminal transceiver interface and an additional terminal transceiver, PY: y ' 002 ~~ TE RUIN a TARE eR TERMINAL FAY TRANSCEIVER INTERFACE MUFTI . TERMINAL Ne es 020122002 1 enliven “— FXVO1 PN: HOST 810022-001 TERMINAL Figure 4-2.
Chapter Insert the male connector of the 12-foot cable from the terminal transceivers into the female connectors on the terminal transceiver interface marked Terminal Transceiver 1 or Terminal Transceiver 2. if thee-foot cable is not long enough, it may be extended up to 1000 feet by using any four conductor, one-to-one standard telephone extender cable available at various retell outlets, such as Radio Shack® or Best Buy®. You can also have the premises wired for extending the cables.
Installation Installing Large Area Coverage 7 Step-by-Step To install the large area coverage: 1. Ensure the host terminal is properly configured and connected for use as a standard POS terminal. See the manual provided with the host POS terminal. Insert one end of the PIN pad cable, Hyper com P/N 810022001 the © pad port of the host POS terminal. Insert the other end of the PIN pad cabin into the connector marked To Terminal on the terminal transceiver interface, Hyper com P/N 020192-001.
Chapter 2 MODULE MODULE CONNECTOR CONNECTOR] Pr ax] . 4 2 Prom 5 51 ADDITIONAL CONNECTORS MAY BE ADDED! IN PARALLEL Figure 4-4. Premises wiring diagram Installation Examples’ Figures 4-5 through 4.7 are installation examples KITCHEN AREA fod TERMINAL TRANSCEIVER 0 TS ost POS COUNTER AREA Ho Figure 4-5. Basic system example 2-8 $00 MHz Wireless Interface System Operation and Installation Manual 940139.
Chapter 2 PATIO AREA Gn ooo ob oP peg © o 0® obs oN O23 db 3 op (pdp cif apg 0 of Oo [SC] of Jo of pel tad 3 KITCHEN AREA Figure 4.7. Large area example 340138-001 900 MHz Wireless Interface System Operation and Installation Manual 2.
Warranty WARRANTY (A) Hyper com Corporation warrants halt the equipment is free from defects in material or workmanship at the time of shipment and that it conforms to applicable specifications for such products for the period of ime specified below. The T7 Family of Terminals® 5 years | .
Warranty Upon the request of Hyper cam, the buyer shall return the equipment, transportation ond all other costs prepaid, to a location designated by Hyper com. Hyperion's obligations under this warranty are limited to the repair or replacement of the returned equipment ond shipment 1o the buyer of such repaired or replacement parts EQUABLE. Hyperion's factory or warehouse.
Warranty ® = ©) THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND HYPER COM EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR ANY PARTICULAR PURPOSE. Hyperion's sole liability and the Customer's sole remedy, whether in contrast, tart, or otherwise, shall be limited to the repair or replacement of defective or faulty equipment.
Warranty Hyper com does not warrant that the functions contained in the software will meet Customer's requirements; that it will operate in the combinations which Customer moy select for use; that the operation of Software will be uninterrupted or error free; or tho! oll programming errors will be corrected.
Reader Comment Form Please forward any comments about this document fo: Hyper com Corporation Technical Information Development 2851 West Kathleen Rood Phoenix, Arizona 85023 supercomputer Document Umber: 940139-001