Consulting * Research * Training * Certification Testing Since 1981 Exhibit 9 SmartICE/CDPD Point of Sale Device Hypercom FCC ID: NVA010164-005A User’s Manual January 2000 APREL Project No.
draft SmartICE Hardware and Installation Manual Version 1.
Hypercom Corporation 2851 West Kathleen Road Phoenix, Arizona 85053 USA Corporate Telephone 602.504.5000 Corporate Fax 602.866.5380 Corporate Website www.hypercom.com Copyright 2000 by Hypercom Corporation. Produced in the United States of America. Hypercom Corporation 2000. All rights reserved. Hypercom and the Hyprcom logo are registered trademarks of Hypercom Corporation.
FCC PART 15 REQUIREMENTS NOTICE § · This device must not be installed on coin-operated telephone lines or party lines. · This device (equipment) complies with the requirements in Part 15 of FCC Rules for a Class B computing device. Operation of this device (equipment) is subject to the following two conditions: - This device (equipment) may not cause harmful interference, and - This device must accept any interference received, including interference that may cause undesired operation.
Table of Contents Introduction Document Organization. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii Document Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 2 Equipment Installation Installing the SmartICE Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Turning on the Terminal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Installing the SmartICE Paper Roll. . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
940264-001 Hypercom Corporation vii
List of Figures Chapter 1 Equipment Information SmartICE terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Chapter 2 Equipment Installation SmartICE under panel connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 SmartICE side view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction This manual, SmartICE Hardware and Installation Manual, is a comprehensive guide to working with the Hypercom SmartICE Terminal. Document Organization This book is designed to provide you with information relevant to Hypercom equipment.
Introduction Procedures Procedures: Numbered procedures have a special graphic appearing in the margin of the text. The words Step-by-Step also appear in bold at the beginning of the procedure. An example of procedure formatting follows. Step-by-Step To perform a procedure: 1. Follow the steps outlined in the procedure. 2. Each procedure has at least two steps. Warning and Caution Messages When you see a Warning message or Caution message, read it promptly and carefully before proceeding further.
C H A P T E R 1 Equipment Information This chapter provides an overview of the Hypercom SmartICE terminal. Included are the features and benefits of the devise. Terminal Information The Hypercom SmartICE terminal is a fully functional terminal that supports draft capture, check verification and guarantee, authorization, and debit. When communication with the host is interrupted, the terminals support offline transaction capture.
Chapter 1 Figure 1-1.
Equipment Information Terminal Connection Ports The following is a description of the ports on the SmartICE terminal. LAN Port The RS485 LAN port allows up to 16 terminals to be installed in environments using the Hypercom MiniNAC-II, NAC-1A, or NAC-6A LAN controller. PIN Pad Port The PIN pad port supports a range of PIN pads including Hypercom Models S7, S7-C, and S8. PIN encryption is according to ANSI X 9.8. The capability to generate ANSI X 9.9 Message Authentication Code (MAC) is optional.
Chapter 1 Transactions and Functions The SmartICE terminal supports the full transaction set required for authorization, draft capture, debit, check verification and guarantee, proprietary cards, and mail and phone. Term-Master supports automated terminal configuration, terminal interrogation, automated program changes, and merchant installation. Terminal Initialization Automated Terminal Configuration is downloaded from the host or from the Hypercom TermMaster application.
Equipment Information Features Financial Integrity The SmartICE terminal generates automatic reversals to achieve total financial transaction integrity. These reversals ensure that communications and processing errors do not result in lost transactions, duplicate processing, or the failure of terminals to balance. The SmartICE terminals also enable simple terminal balancing and settlement, while eliminating network overloads caused by end-of-day batch transfers.
Chapter 1 Networking Efficiency The SmartICE terminals are totally compatible with the Hypercom family of Network Access Controllers (NACs), providing end-to-end network optimization and concentration to keep communication costs low. Term-Master The SmartICE terminals support parameter and software downloading. Parameter downloading does not affect merchant totals due to the sophisticated architecture of the terminal.
C H A P T E R 2 Equipment Installation This chapter describes how to install the SmartICE terminal. Installing the SmartICE Terminal This chapter describes how to install the SmartICE terminal and port locations.
Chapter 2 The SmartICE under panel connectors include power, PIN, and line ports. PIN port Line port Power port Battery pack panel Figure 2-1. SmartICE under panel connectors WARNING When using the Mobitex and CDPD version, the user must ensure that the device is not positioned in such a way as to put the side of the terminal near the antenna and above the credit card slot less than 3cm (1 1/8”) from any part of the body for a period of six minutes or more.
Equipment Installation Turning On the Terminal The SmartICE terminal operates using a +12 Vdc power cable in conjunction with a 110-Volt grounded power receptacle. Step-by-Step To turn on the smartICE terminal: 1. Connect the +12 Vdc power cable from the AC adapter to the terminal power socket labeled PWR. 2. Plug the adapter into a 110-Volt grounded power receptacle. Be sure the connector is firmly seated.
Chapter 2 Installing the SmartICE Paper Roll The SmartICE uses a paper roll for receipt printing. Step-by-Step To install the SmartICE paper roll: 1. Open the paper bucket cover and remove the paper roll. 2. Place the paper roll in the bucket so the paper feeds from under the roll, not over the top, and has a straight-line path into the printer paper-feed mechanism. 3. Feed the paper evenly into the paper feed slot at the rear of the SmartICE terminal. 4.
Equipment Installation Accessing the Battery Pack The SmartICE uses a lithium battery pack. Step-by-Step To access the battery pack on the SmartICE terminal: 1. Place your finger on the top portion of the Battery Pack access panel. NOTE: See Figure 2-1. 2. Slide the access panel down. 3. Remove the battery pack.
Chapter 2 Adjusting the Display Contrast The SmartICE uses a contrast control dial to adjust the display. Step-by-Step To adjust the contrast on the SmartICE terminal: 1. Place your finger on the Contrast Control Dial. NOTE: See Figure 2-2. 2. Slide the access clockwise to darken or counter-clockwise to lighten the contrast. Contrast Control Dial Figure 2-2.
We Welcome Your Comments Please fax this page with your comments to Hypercom Corporation at 602.504.4990 Document Number: 940264-001 1. In one word, how would you describe this guide? _________________________________________ 2. How do you use this guide? n I read it from beginning to end. n I read only the sections that relate to my immediate needs. n I read only the sections that relate to my job. 3.
Hypercom Document Number 940264-001 SmartICE Hardware and Installation Manual, Version 1.
