Hyper com Corporation 2851 West Kathleen Road Phoenix, Arizona 85053 USA Corporate Telephone: 602.504.5000 Corporate Fax: 802.866.5380 Corporate Web Site: supercomputer Copyright 2000 by Hyper com Corporation. Produced in the United States of America. Hyper com Corporation 2000. All rights reserved. Hyper com and the Hypodermic logo are registered trademarks of Hyper com Corporation.
FCC PART 15 REQUIREMENTS NOTICE = This device must not be installed on coin-operated telephone lines or pant lines. + This device (equipment) complies with the requirements in Part 15 of FCC Rules for a Class A computing device. Operation of this device (equipment) is subject to the following two conditions: — This device {equipment} may not cause harmful interference, and — This device must accept any interference received, including interference that may cause undesired operation.
Tahoe of Contents List of Figures introduction Document Organization. . ooo. Ce. Xl Document Conventions .. Lo... uit eee Xi Chapter 1 Equipment information Terminal INFOTAINMENT. Loewi 1-1 PAIUTES. Li .. 1-2 Terminal Initialization Terminal Diagnostics . Application Program Changes . Financial Integrity... Fast Response Times... ooh ian. Reduced Communications COSTS. .. overt iit i ie es Networking Efficiency . ooo. 1-8 StairMaster oo.
List of Figures Chapter 1 Equipment Information ICE4000 terminal... Chapter 2 Equipment Installation HOE 4000 under panel connections . u.
Introduction This book, ICE 4000 Hardware and Installation Manual, is a comprehensive guide to working with the Hyper com ICE 4000 terminal. Guide Organization This book is designed to provide you with information relevant to Hyper com equipment.
introduction Guide Conventions This section provides information to help you understand the procedures and concepts presented in this guide. The following special terms and style conventions are used throughout this document: Component names: Special bold text highlights certain items including the names of window and dialog box components.
Equipment Information This chapter provides an overview of the Hyper com ICE 4000 terminal. Included are the features and benefits of the device Terminal Information The Hyper com ICE 4000 terminal is a fully functional terminal that supports draft capture, check verification and guarantee, authorization, and debit. ‘When communication with the host is interrupted, the terminals support offline transaction capture. These transactions are then communicated to the host before settlement.
Chapter 1 Figure 1-1. ICE 4000 terminal Features * Integrated thermal printer * High-contrast 160 x 160 FASTEN » 512K memory, optional 1 MB display with integrated 12-bit resolution and 1.5 MB available * Full track 1 & 2 simultaneous card * Integrated PIN and signature eg d sigma reader capture pads * Dial fine operation * Multi-tasking operating system Smart card support Electronic receipt capture .
Equipment information ICE 4000 Hardware Features The following is a list of the ports and features of the ICE 4000 terminal: Comm Port The RS232 comm port allows the ICE 4000 terminal to communicate with external devices such as an ECR {electronic cash register), OCR (optical character reader) wand, and a bar code reader. Power Port The power port supports two types of Hyper com power packs: The Linear power pack is used within the United States of America. The Switcher power pack is used internationally.
Chapter 1 Terminal Initialization Automated Terminal Configuration is downloaded from the host or from the Hyper com Term Master application. Term-Master terminal profiles are downloaded through terminal initialization to meet the specific requirements of merchant categories such as restaurants for tips, retail, supermarkets, and the hospitality industry.
Equipment Information Features This section discusses many of the features of the ICE 4000 terminal. Financial integrity The ICE 4000 terminal generates automatic reversals to achieve total financial transaction integrity. These reversals ensure that communications and processing errors do not result in ghost transactions, duplicate processing, or the failure of terminals to balance.
Chapter 1 Networking Efficiency The ICE 4000 terminals are totally compatible with the Hyper com family of Network Access Controllers (Nacre, providing end-to-end network optimization and concentration to keep communication costs low. Term-Master The ICE 4000 terminals support parameter and software downloading. Parameter downloading does not affect merchant totals due to the sophisticated architecture of the terminal.
Chapter 2 The ICE 4000 under panel connectors include power, PIN, battery and SAM chip panels, and line ports. Paper roll lock switch — Line port External antenna PIN port connector for radio Power port SAM chip access panel Battery pack panel Figure 2-1.
Equipment Installation Turning On the Terminal The ICE 4000 terminal operates using a +12 Vdc power cable in conjunction with a 110-Volt grounded power receptacle. Step-by-Step To turn on the ICE 4000 terminal: 1. Connect the +12 VDC power cable from the AC adapter to the terminal power socket labeled PAH. 2. Plug the adapter into a 110-Volt grounded power receptacle. Be sure the connector is firmly seated.
Chapter 2 Installing the ICE 4000 Paper Roll The ICE 4000 uses a paper roll for receipt printing. fi why } Step-by-Step install the ICE 4000 paper roll: 1. Open the paper bucket cover and remove the paper roll. 2. Place the paper roll in the bucket so the paper feeds from under the roll, not over the top, and has a straight-line path into the printer paper-feed mechanism. 3. Feed the paper evenly into the paper feed slot at the rear of the ICE 4000 terminal, 4.
Equipment installation Accessing the Battery Pack The ICE 4000 uses a lithium battery pack. ah Step-by-Step ] Ta access the battery pack on the ICE 4000 terminal; 1. Place your finger on the top portion of the Battery Pack access panel. Note: See Figure 2-1 on page 2-2. 2. Slide the access panel down. 3. Remove the battery pack. When replacing the battery pack, ensure that the battery is placed label-side up.
Chapter 2 Adjusting the Display Contrast The ICE 4000 uses a contrast control dial to adjust the display. Step-by-Step adjust the contrast on the ICE 4000 terminal: 1. Place your finger on the Contrast Control dial. Note: See Figure 2-2. 2. Turn the Contrast Control dial clockwise to darken or counter-clockwise to lighten the contrast. Contrast Control Dial Figure 2-2. ICE 4000 side view 2-6 ICE 4000 Hardware and Installation Manual 840264.
We Welcome Your Comments Please fax this page with your comments to Hyper com Corporation at 602.504.4990 Document Number: 840264-001 1. In one word, how would you describe this guide? 2. How do you use this guide? * | read it from beginning to end. * read only the sections that relate to my immediate needs. * | read only the sections that relate to my job. 3.