Datasheet

ept GmbH I Tel. [phone] / 25 01 0 I Fax [phone] / 55 07 I E-Mail [e-mail] I www.ept.de
9
4ECHNICAL3PECIlCATION
One27
4ECHNICALç3PECIlCATION
4ECHNICALÏSPECIlCATION
One27
4ESTÏ3TANDARD
ÏMMÏ3-4Ï"OARDTO"OARDÏ#ONNECTORSÏ
)$#Ï#ABLEÏ!SSEMBLY
"ASICS
Number of pins 12 / 16 / 20 / 26 / 32 / 40 / 50 / 68 / 80
Termination SMT
Operating temperature range -55°C to +125°C (Board-to-Board Connectors)
-ATERIAL
Insulator material LCP, UL 94 V-0
CTI value IEC 60112 175
Contact material Copper alloy
Contact surface Au over PdNi over Ni / Au over NiP over Ni
Termination area Sn
-ECHANICAL
Pitch 1.27 mm
Mating force per pin 0.5 N
Seperating force per pin 0.5 N
Durability IEC 60512-9-1:2010 Performance level I: 500 mating cycles
Coplanarity max. 0.1 mm
Vibration, sinusoidal IEC 60512-6-4:2002
10 - 200 Hz
20 g
Contact mating problems if vibrations occur, sinusoidal IEC 60512-2-5:2003 < 1 µs
Shock, semi-sinusoidal IEC 60512-6-3:2002
50 g
11 ms
Contact mating problems if shocks occur, semi-sinusoidal IEC 60512-2-5:2003 < 1 µs
%LECTRICAL
Operational current IEC 60512-5-2:2002 max. 1.4 A at 20°C (50 pins)
Contact resistance IEC 60512-2-1:2002
max. 25 m:
max. 10 m: (Female IDC assembled with cable)
Clearance and creepage min. 0.4 mm
Insulation resistance IEC 60512-3-1:2002 max. 10 G:
Test voltage IEC 60512-4-1:2003 500 VAC
0ROCESSING
Soldering temperature JEDEC J-STD-020E MAXÏ3-4ÏREmOWÏSOLDERINGÏTEMPERATUREÏÏÏÏSÏATÏ#
MSL JEDEC J-STD-020E 1
Packaging Tape and Reel, Tray (IDC female connector)
Assembly Pick and place
!PPROVAL
5,ÏlLE E130314
Environment RoHS compliant