Temperature Compensated Crystal Oscillator (TCXO) Data sheet MODEL : TG2016SMN 26.000000 MHz MCGNNM X1G0054410304xx Product. No. : Please refer to the 10.Packing information about xx (last 2 digits) SEIKO EPSON CORPORATION Pb free. Complies with EU RoHS directive. *About the products without the Pb-free mark. Contains Pb in products exempted by EU RoHS directive. (Contains Pb in sealing glass, high melting temperature type solder or other.) INTRODUCTION 1.
[ 1 ] Characteristics · Package size (2.0 mm×1.6 mm×0.73 mm) · High stability TCXO · Output waveform : Clipped sine wave · Reference weight Typ.9.2mg [ 2 ] Absolute maximum ratings Parameter Supply voltage Storage temperature range Symbol Vcc-GND T_stg Min. -0.5 -40 Specifications Typ. - Max. +4.0 +90 Unit Conditions V °C Storage as single product [ 3 ] Recommended operating conditions Specifications Unit Conditions Min. Typ. Max. Vcc 2.66 3.
(Vcc=2.66 to 3.465 V, GND=0.0 V, Load=10 kΩ // 10 pF, T_use=+25°C) [ 5 ] Electrical characteristics Parameter Symbol Current consumption Output level Symmetry Icc Vp-p SYM Start up time t_sta Harmonics Phase noise - L(f) Min. 0.8 45 Specifications Typ. 50 Max. 1.5 55 - - 2.0 ms - - 1.0 ms - -65 -94 -120 -141 -156 -161 -162 -5.0 - dBc 3 Unit Conditions mA V % Peak to peak voltage GND level (DC-cut) Until frequency has been reached within +/-0.5x10⁻⁶ of final freq.
[ 6 ] Test circuit 1) Output Load : Load_R // Load_C = 10 kΩ // 10 pF DC-cut Capacitor Supply Voltage Vcc OUT N.C. GND By-pass Capacitor Load_C Test Point Load_R 0.01 to 0.1 F 2) Current consumption DC-cut Capacitor A Supply Voltage Vcc OUT N.C. GND By-pass Capacitor Load_C Load_R 0.01 to 0.1 F 3) Conditions 1. Oscilloscope: Impedance Min. 1MΩ Input capacitance Max. 10 pF Band width Min. 300 MHz Impossible to measure both frequency and wave form at the same time.
[ 7 ] Outline drawing unit:mm [ 8 ] Recommended foot print #3 #4 unit:mm 0.6 #3 1.13 0.75 1.6±0.15 #4 #2 2.0±0.15 1.58±0.1 1.65 Pin # 1 2 3 4 #2 0.40±0.1 #1 1.18±0.1 C0.15 #4 Connection N.C. (*1) GND OUT Vcc *1) Please keep “N.C.” pin OPEN condition or GND connection. "N.C." pin doesn’t work as a ground pin. #3 1.2±0.1 #2 #1 0.73±0.07 (0.27) #1 For stable operation, please add a bypass capacitor(0.01uF to 0.1uF) between Vcc and GND.
[ 10 ] Packing information 1) Product number last 2 digits code(xx) description. The recommended code is "25" X1G0054410304xx Condition Code Any Q'ty vinyl bag(Tape cut) 01 Any Q'ty / Reel 11 1000pcs / Reel 14 2000pcs / Reel 15 3000pcs / Reel 16 12000pcs / Reel 25 2) Taping specification Subject to EIA-481 & IEC-60286 (1) Tape dimensions TE0804L Material of the Carrier Tape : PS Material of the Top Tape : PET+PE unit:mm φ 1 .0 2 .25±0 .1 EPS EPS 4 .0±0 .1 0 .25±0 .05 8 .0±0 .2 +0 .1 1 .5 0 3 .
[ 11 ] Handling precautions Prior to using this product, please carefully read the section entitled “Precautions” on our Web site ( https://www5.epsondevice.com/en/information/precaution/handling.html ) for instructions on how to handle and use the product properly to ensure optimal performance of the product in your equipment.
[Notice] · This material is subject to change without notice. · Any part of this material may not be reproduced or duplicated in any form or any means without the written permission of SeJQo Epson. · The information about applied data,circuitry, software, usage, etc. written in this material is intended for reference only. SeJQo Epson does not assume any liability for the occurrence of customer damage or infringing on any patent or copyright of a third party.