User manual

TB-7Z-020-EMC Hardware User Manual
41
Rev.1.03
7.19. Push Switch
There are 3 switches on the board. The following table shows the details of the Push switches.
Table 7-23 Push Switch Function Table
Switch#
Description
Target IC
IC#
Pin#
Net Name
SW3
PS User Push Switch. Active High(Push)
U15
G6
PS_PUSHSW
SW4
PL User Push Switch. Active Low(Push)
U15
V10
FP_PUSHSW0
SW5
PL User Push Switch. Active Low(Push)
U15
AA8
FP_PUSHSW1
SW6
PL User Push Switch. Active Low(Push)
U15
V9
FP_PUSHSW2
SW7
PL User Push Switch. Active Low(Push)
U15
Y8
FP_PUSHSW3
SW8
Toggles XC7Z020’s PS_SRST_B
U15
C9
PS_SRST_B
SW9
Toggles XC7Z020’s PROG_B
U15
T11
PROG_B
Only erase PL Design
USER LEDsPLL Setting SW USER SW
USER SW Re-Configuration SW
Power / Config LEDsPS Soft Reset SW
Figure 7-31 Push Switches