PS-100 User’s Guide
Introduction Thank you for purchasing the PS-100. To use the device, make sure you read the User’s Guide and the Quick Start guide. Trademarks EPSON is a registered trademark, EPSON Exceed Your Vision is a registered logomark, and Pulsense is a trademark of Seiko Epson Corporation. Microsoft and Windows are registered trademarks of the Microsoft Corporation in the United States of America and other countries. ® The Bluetooth wordmark and logos are the registered trademarks owned by Bluetooth SIG, Inc.
Log onto PULSENSE View for iOS or Android on your smart device. Viewing data Log onto the PULSENSE View web application. Note: To charge the PS-100, a USB port is required. You can use the USB port on a PC or the optional AC adapter. Use only the specified AC adapter (SFAC04).
Contents Introduction 2 Description in the User’s Manual .................................................................................. 2 Trademarks................................................................................................................... 2 Caution: ........................................................................................................................ 2 System Requirement .........................................................................................
Appendix 32 Product Specification .................................................................................................. 32 Device Specifications ............................................................................................. 32 Cradle Specification ............................................................................................... 32 Options specifications ............................................................................................
Using this device safely Make sure you read the documentation (Quick Start guide and User’s Guide) first before using this product safely. The product may malfunction, or an accident may occur if it is handled incorrectly. - Keep the documentation handy to help you resolve any problems. - When taking this product out of the country of purchase, check the laws and regulations in the destination country before you travel.
Notes on using the product and components Warning Exercise according to your physical capabilities. Stop exercising and consult your doctor if you feel unwell during exercise. This product is not intended for use to diagnose, prevent, or treat disease or other conditions, and is not a medical device. If you have any concerns, consult your doctor before using this product. Do not keep your eyes on the device while exercising. Pay attention to your surroundings while using the device.
Note: Please note that even if not in use, the PS-100 should be charged at least once within a 6 month period. Failing to do so might affect the performance of the rechargeable battery. Notes on using the cradle Warning Do not use the charging cradle, AC adapter, or USB cable if they are damaged, faulty, or contaminated by foreign material such as dust, water, or dirt. Do not use any adapter other than the specified adapter for charging.
Set up and basic operation Follow these instructions to use your device: “Things You Can Do with the Product” on page 10 “What’s in the box” on page 10 “Getting Started” on page 11 “Initial Configuration” on page 17 Set up and basic operation • 9
What’s in the box Contact your reseller if there are any missing or damaged components. PS-100 Charging Cradle Quick Start Guide Options You can purchase the following optional accessories.
Getting started Recording your data ! Important To record your data it is necessary to register your device with the PULSENSE View smart device application. Data Calculated Heart rate Reads and records your heart rate from the changes in light reflected through the blood vessels in your wrist. Calories Calculates burned calories based on body motion and heart rate information. When heart rate measurement is disabled, the PS-500 will calculate calories burned based on body motion only.
! Important Ensure the PS-100 is oriented in the cradle correctly. 2 Charging the product.
2-1 Using a PC Insert the cradle's USB cable into a free USB port on your PC. If you are connecting the cradle via a USB hub it may not charge. Connect the cradle’s USB port directly to the USB port of the PC instead. Note: You can use a PC to charge your PS-100, but not to upload any data. PS-100 requires a mobile device ® with Bluetooth Smart to upload data.
4 Remove the product from the cradle. Press the small tab down and push the PS-100 out from the back. The product is ready for Bluetooth pairing when fully charged and detached from the charging cradle. Start-up operation All LEDs light up in sequence and the PS-100 vibrates. ! Important - Pair with your smart device after purchase. The memory of your device will not be enabled until pairing is completed. - If you remove the PS-100 from your wrist and no movement is detected, it will go into sleep mode.
Wearing the PS-100 When wearing the product, make sure it does not touch the ulna bone on your wrist. Note: The Pulsense band needs to be worn snugly around the wrist to collect more accurate heart rate data. This may cause a slight impression on the wrist. Adjust the band for the comfort and performance you choose. 1 Measure the circumference of your wrist closely at the position indicated in the illustration without touching the ulna bone.
4 5 Insert the band fastener into the hole number you checked in step 2. Put your hand through the wristband and fasten the buckle. When wearing the product, make sure it does not touch the bone. Adjust the wristband to a smaller hole number if the wristband is too loose.
Initial configuration Smart device user 1 Search your smart device's app store for Epson PULSENSE View (free), and then install it. ® Make sure "Internet communication" and "Bluetooth " are enabled in your smart device. Check the operating instructions for your smart device for the internet and Bluetooth instructions. 2 Start Epson PULSENSE View. Make sure that the product is within three feet (one meter) from the smart device and the battery is fully charged.
3 Set up your PULSENSE View account by following the on-screen instructions. Once you have created your account and completed your profile, follow the on-screen instructions to pair your PS-100 with your smart device. When pairing is successful, the LEDs will light up twice in sequence and the above screen is displayed on the smart device.
Pairing issues When using the product for the first time, check the following: 1. Attach the PS-100 to the cradle to wake the PS-100 from battery protection mode. ® 2. Enable Bluetooth communication on your smart device. 3. Check smart device compatibility: epson.com/PSdevices 4. Ensure your smart device is connected to the Internet. ® 5. Remove any other product from the area that could interfere with the Bluetooth communication.
Using your PS-100 This product measures heart rate and activity 24 hours a day, tracking your steps, distance, calories, sleep quality, and heart rate across five zones helping you to make better lifestyle choices.
Heart rate measurement Heart rate detection 1 Heart rate detection starts when the product is moved and the LEDs flash in sequence as shown below. Note: Heart rate detection will stop if the product is not worn and has not been moved for three minutes. Heart rate detection will start again when the product is moved. 2 After putting on the product, the blue LEDs flash two times when it detects your heart rate. The product is in pulse measurement mode.
When the heart rate can’t be detected LED Issue How to solve The device is not being worn correctly onto your wrist. Wear the product closely around your wrist without touching the ulna bone. The device is not being worn correctly on your wrist or the temperature on the surface of your skin is too low. Wear the product closely around your wrist without touching the ulna bone. Warm your wrist and fingertips if they seem cold. Heart rate zones You can check your heart rate zone using the product LEDs.
50～59% ↑ ↑ ↑ - 60～69% ↑ ↑ ↑ - 70～79% ↑ ↑ ↑ - 80～89% ↑ ↑ ↑ - Above 90% - Blinking (Faster) Note: You can check your real time heart rate (updated every four seconds) in the PULSENSE View app. Swipe the tab located in the middle at the top of the screen to the bottom in order to display the realtime meter.
How to stop and resume heart rate measurement Heart rate detection stops if the product is not worn and has not been moved for three minutes. Heart rate detection starts again when the product has been moved. This LED pattern is shown when the PS-100 has been removed from your wrist: Note: Place the product onto a flat surface to stop measurement. It may take one to six minutes until the measurement stops. To resume heart rate measurement, put the PS-100 on your wrist.
Low battery notification If the battery level is low, the orange LED will flash every 4 seconds. Once the remaining battery level is down to 1 hour, the orange LED flashes once a second for a duration of 30 seconds and the PS-100 stops measuring heart rate until the product has been charged.
Airplane mode Wireless communication must be turned OFF during a flight. Set the product to Airplane Mode before takeoff. When transporting the product it is recommend that you use this mode. 1 Remove the product from your wrist and repeatedly tap the face of the product as shown below. ! Important If you tap the PS-100 continuously as shown above while the device is connected to the charging cradle, the pairing settings will be deleted.
Turn off airplane mode 1 Repeatedly tap the face of the product. The LEDs will light up and display the pattern below to confirm it is still in Airplane Mode. 2 Keep tapping until the LEDs turn off. The product will resume heart rate measurement and wireless communication.
Additional functions “Notification Settings” on page 29 “Wake-up Alarm” on page 29 Additional functions • 28
Notification settings Depending on your settings, the product can alert you by vibration and LEDs when you receive an E-mail, call, or calendar notifications on your smart device. To alert you, the LED pattern will light up six times, as shown below, and vibrate. Vibration must be enabled in the PULSENSE View settings for the alarm’s vibration feature to work. You need to enable the notification settings in the Device settings of PULSENSE View. See the PULSENSE View help section for details.
Maintenance “Looking after your device” on page 31 “Replacing the Battery” on page 31 “Updating the Firmware” on page 31 Maintenance • 30
Looking after your device Clean the PS-100 regularly. Wipe your product with a damp cloth, remove the moisture with a towel, then let it air dry. ! Important: Avoid water, sweat or dirt build up between your skin and the product as it could lead to skin irritations. About the wristband The wristband is made of silicon which could lose its elasticity and color over time. Replacing the battery You cannot replace the built-in, rechargeable battery.
Troubleshooting This section explains how to solve problems that occur during use. “Caution” on page 33 “Problem Solving” on page 34 “System Reset” on page 35 “Contacting us” on page Error! Bookmark not defined.
Caution ・ To avoid the possibility of skin irritation or discomfort from wearing the PS-100, you must keep the skin under the band clean and dry at all times. Do not allow water, sweat, dead skin, or dirt to build up under the band. It is important to keep the band clean and dry at all times by wiping the band with a damp cloth, removing the moisture with a towel, and letting it air dry.
Problem solving Check each item. Problem LED is not ON or Flashing. Solution Before charging, the PS-100 is in battery protection mode. Put the product in the cradle and connect it to a USB port or AC adapter to charge the product and wake the product from battery protection mode. “Getting Started” on page 11 The product is not responding. Check the battery level and charge the product if necessary. The product does not charge when it is put in the cradle. Charging stops frequently.
System Reset If device operations become unstable, perform a system reset by connecting the product to the cradle. Charging resets the system, and returns the product to normal operation. If this suggestion does not solve your problem, check “Problem Solving” on page 34.
Where to get help Internet support Visit epson.com/support/ps100 (U.S.) or epson.ca/support/ps100 (Canada) for solutions to common problems. You can get tips, usage information, and FAQs, download utilities, view the User’s Guide, or e-mail Epson. Telephone support services Call (562) 276-4394 (U.S.) or (905) 709-3839 (Canada). Support hours are 6 AM to 8 PM, Pacific Time, Monday through Friday, and 7 AM to 4 PM, Pacific Time, Saturday. Days and hours of support are subject to change without notice.
Appendix “Product Specification” on page 32 Appendix • 37
Product specification Device specifications Contents Model Specification PS-100 1.77 in ｘ 0.87 in ｘ 0.49 in (excluding sensor unit） 45 mm ｘ 22 mm ｘ 12.5 mm (excluding sensor unit） Size (LxWxH) S/M: 1.05 oz/30 g Weight M/L: 1.09 oz/31 g S/M: 5.31 in-6.30 in/135 mm-160 mm Wrist Size M/L: 5.91 in-8.27 in/150 mm-210 mm Battery Rechargeable Lithium Polymer 40mAh Battery Life(Heart rate ON) Approx. 36 hours （depending on usage） Recharge Time Approx. 2.
CPD-42360 SEC PN: 412834700 Appendix • 39
