Epson PowerLite 830p Multimedia Projector ® ® User’s Guide
Important Safety Information WARNING: Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages inside the projector can severely injure you. Except as specifically explained in this User’s Guide, do not attempt to service this product yourself. Refer all servicing to qualified service personnel.
Contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Using Your Documentation . . . . . . . . . . . . . . . . . . . . . . . . . 10 Getting More Information . . . . . . . . . . . . . . . . . . . . . . . 10 Registration and Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Unpacking the Projector. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Additional Components. . . . . . . . . . . . . . . . . . . . . . . . . 12 Optional Accessories . . . .
2 Using the Remote Control . . . . . . . . . . . . . . . . . . . 31 Turning On and Using the Remote Control . . . . . . . . . . . . 32 Replacing the Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . 33 Controlling the Picture and Sound. . . . . . . . . . . . . . . . . . . . 34 Switching Between Picture Sources . . . . . . . . . . . . . . . . 34 Previewing Picture Sources . . . . . . . . . . . . . . . . . . . . . . 35 Adjusting the Image Shape. . . . . . . . . . . . . . . . . . . . . . .
4 Fine-Tuning the Projector . . . . . . . . . . . . . . . . . . . 59 5 Managing Projectors Using the Menu System . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Restoring the Default Settings . . . . . . . . . . . . . . . . . . . . 61 Adjusting the Image Quality. . . . . . . . . . . . . . . . . . . . . . . . . 62 Adjusting the Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Adjusting Signal Settings . . . . . . . . . . . . . . . . . . . . . . . .
Contents 6 Maintaining the Projector. . . . . . . . . . . . . . . . . . . 95 Cleaning the Lens. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 Cleaning the Projector Case . . . . . . . . . . . . . . . . . . . . . . . . . 96 Cleaning the Air Filters and Vents . . . . . . . . . . . . . . . . . . . . 96 Replacing the Lamp and Air Filters . . . . . . . . . . . . . . . . . . . 97 Resetting the Lamp Timer . . . . . . . . . . . . . . . . . . . . . . . 99 Transporting the Projector . . . .
D Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . 121 Remote Control Information . . . . . . . . . . . . . . . . . . . . . . . 123 Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . 124 FCC Compliance Statement. . . . . . . . . . . . . . . . . . . . . . . . 125 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126 Index . . . . . . .
Contents
- Welcome The Epson ® PowerLite® 830p is an easy-to-use, lightweight projector that offers up to 3000 lumens of brightness and a 600:1 contrast ratio for incredibly vivid images and clear text. Versatility You can connect it to a wide range of computers and video sources, or you can project over a wired LAN network.
Using Your Documentation This book contains all the information you need to set up and use your projector. Please follow these guidelines as you read through it: ■ Warnings must be followed carefully to avoid bodily injury. ■ Cautions must be observed to avoid damage to your equipment. ■ Notes contain important information about your projector. ■ Tips contain additional projection hints.
■ If you still need help after checking this User’s Guide and the sources listed above, you can use the Epson PrivateLine Support service to get help fast. Call (800) 637-7661 and enter the PIN on the card in your Start Here kit. Or take advantage of Epson’s automated support services 24 hours a day. See page 112 for more information.
Unpacking the Projector After unpacking the projector, make sure you have all the parts shown below: note You won’t need all these components; your configuration will determine which ones you need. Projector Power cable Remote control and batteries Projector software CD-ROM VGA computer cable USB cable Save all packaging in case you need to ship the projector. Always use the original packaging (or the equivalent) when you need to send the projector to another location.
■ Some older PowerBooks® and Macintosh® desktop models may need the Macintosh desktop adapter set shown on page 48 (available from Epson; see below.) Older iMac® systems may need a special adapter to provide a VGA output port; see your computer dealer.
Welcome
1 Displaying and Adjusting the Image W hether you’re presenting from a computer or video equipment, you need to follow some basic steps to display your image on the screen.
Positioning the Projector note You can mount the projector on the ceiling, or place it behind a translucent screen for rear projection. See page 115 for details. If the projector isn’t already installed in the room you’re using, you’ll probably want to place it on a table in front of the screen, as shown. This lets you stand in the front of the room, face the audience, and remain close enough to the equipment to be able to control it.
Ideally, you should place the projector directly in front of the center of the screen, facing it toward the screen squarely. The base of the lens should be at about the level of the bottom of the screen. Projector note After positioning the projector, you may want to connect a Kensington MicroSaver® anti-theft device to the lock port on the projector’s left side. You can purchase this from Epson; see “Optional Accessories” on page 13.
Projecting the Image Make sure your projector and other equipment are set up as described on the Quick Setup sheet or on page 45 (for desktop, video, or other installations). Then follow the instructions below to start the projector and display an image. Turning On the Projector Turn on any connected computer or video equipment before starting the projector so it can automatically detect and display the image source.
3. If the Power light is orange, press the red P Power button on top of the projector—or press the P Power button on the remote control to turn on the projector. The projector beeps once and the Power light flashes green as it warms up. (If this is your first time using the remote control, make sure the batteries are installed and the ON/OFF switch on the side of the remote is turned on.) warning Never look into the lens when the lamp is on.
Selecting the Image Source note To focus and adjust the image, see page 24. If a projected image fails to appear, see page 21 for help. Selecting the image source lets you switch between images input from different pieces of connected equipment (such as a computer or DVD player). If you don’t see the image you want, press the Source Search button on the remote control or the projector repeatedly until you see the image you want to project on the screen.
Troubleshooting Display Problems Follow these guidelines if you’re having trouble displaying an image. You Can’t Project an Image If you don’t see the image you are trying to project, try the following: ■ Make sure the cables are connected correctly, as described beginning on page 45. ■ Make sure the Power light is green and not flashing and the lens cap is off.
■ If the function key doesn’t permit you to display simultaneously on both screens, you should check your monitor settings to make sure both the LCD screen and the external monitor port are enabled. From the Control Panel, open the Display utility. In the Display Properties dialog box, click the Settings tab, then click Advanced. The method for adjusting the settings varies by brand; you may need to click a Monitor tab, then make sure the external Monitor port is set as your primary display and/or enabled.
If you’re using OS 8.6 to OS 9.x: You may need to set up your system to display on the projector screen as well as the LCD screen. Follow these steps: 1. From the Apple menu, select Control Panels, then click Monitors or Monitors and Sound. 2. Click the Arrange icon. Click here Drag one monitor icon on top of the other 3. Drag one monitor icon on top of the other. If the Arrange option isn’t available, you may need to select one of the Simulscan resolution settings: 1. Click the Monitor icon.
Adjusting the Image Once you see your image, you need to make certain adjustments: ■ If the image is too high or too low, you can reposition it. See below. ■ If you have quick setup enabled on the projector, see page 25. ■ To focus or zoom your image, see page 25. ■ If the image isn’t square, see page 26. ■ If a computer image displays incorrectly, see page 28. If you need to fine-tune the image and/or sound, see Chapter 4.
Using Quick Setup You can use the Quick Setup button on the projector or the remote control to quickly and automatically set up the projector’s focus, zoom, and shape, as well as the Wall Shot setting. All you need to do is position your projector, then press Quick Setup. You may need need to enable Quick Setup for some of the settings you want to use; see page 76.
Adjusting the Image Shape In most cases, you can maintain a square or rectangular image by placing the projector directly in front of the center of the screen with the base of the lens level with the bottom of the screen. Even if the projector is slightly tilted (within a range of 40° up or down), the projector has an automatic keystone correction function that detects and corrects vertical keystone distortion.
Using Keystone Correction To adjust your image when it is wider on one side, do the following: ■ Look at the shapes of the icons on the projector’s four keystone buttons. Press the button whose icon is the opposite of the shape of your screen image. Continue pressing the button until you are satisfied with the shape of the image. note The image will be slightly smaller after adjusting.
Correcting Computer Images note You must be projecting an image for this button to have any effect. The Auto button works only with computer images. If you’re connected to a computer and the image doesn’t look right, press the Auto button on the remote control. This automatically resets the projector’s tracking, sync, resolution, and position settings.
Shutting Down the Projector When you’ve finished using the projector, follow these steps to shut it down: 1. Turn off any equipment plugged into the projector. 2. To turn off the projector, press the red P Power button on the projector or remote control. caution Turn the projector off when you’re not using it. Continuous 24-hour-a-day use may reduce its overall life.
Using the Direct Power ON Function The Direct Power ON function enables faster startup. It’s convenient for ceiling mounted projectors because you can simply flip a switch that is connected to the power outlet for the projector to turn it on and off. For desktop or table-top presentations, just connect the power cord to turn it on. You can also turn the power on to restart the projector immediately after turning it off. Follow these steps to enable Direct Power ON: 1.
1 Using the Remote Control T he projector includes a number of tools to enhance your presentation. All of them can be accessed using the remote control, which lets you operate the projector from anywhere in the room—up to 33 feet away. note For information and resources to help you give the most professional presentation, be sure to visit presentersonline.com. You can use the remote control to adjust the picture and sound (page 34) or as a pointer to highlight your presentation (page 43).
Turning On and Using the Remote Control The remote control has an ON/OFF switch on its side, as shown. Before using the remote, make sure batteries are installed as described on page 33, then slide the ON/OFF switch to turn it on. ON/OFF switch note If a button is pressed longer than 60 seconds, the remote control stops operating to conserve power. When you release the button, normal operation resumes.
Replacing the Batteries If the projector stops responding to the remote control, check the following: ■ Make sure the remote control’s ON/OFF switch is in the ON position. ■ Press the light button and check to see if the buttons on the remote control light up. (If you’re in a bright room, you may not be able to see them light up.) If the buttons do not light up, replace the batteries as described below: caution 1. Turn the remote control over.
Controlling the Picture and Sound note You can use the projector’s menus to fine-tune the picture and sound quality as described on page 59. You can use the remote control to preview and select your picture sources, temporarily turn off the picture and sound, freeze the action, zoom in on the picture, display a picture-in-picture image, and adjust the volume.
Previewing Picture Sources You can display a preview image from each connected source to help you select the image source you want. 1. Press Preview on the remote control. Preview button You see the currently selected source displayed in the main window, as shown below. All other sources (including the currently selected source) are displayed in smaller preview windows on the right side and along the bottom.
Adjusting the Image Shape Even if your projected image has no parallel sides, you can even up the sides using Quick Corner: 1. Press the Menu button on the remote control (or on the projector’s control panel). 2. Select the Setting menu and press Enter. note 3. From the Setting menu, select Keystone and press Enter. If you are already using keystone settings, you see a warning message. To disable keystone settings and use Quick Corner instead, press Enter; to keep your settings, press Esc. 4.
Turning Off the Picture and Sound You can use the A/V Mute button on the remote control to turn off the image and sound and darken your screen. This feature is useful if you want to temporarily redirect your audience’s attention without the distraction of a bright screen. ■ To turn off the picture, press the A/V Mute button. The screen goes dark. ■ To turn the image back on, press the button again.
Zooming Part of Your Image You can zoom in on a portion of the image using the E-Zoom buttons on the remote control. 1. Press the E-Zoom button on the remote control. You see a cross hair indicating the center of the zoom-in area. 2. Use the pointer button to position the cross hair on the part of the image you want to enlarge. 3. Continue pressing the E-Zoom area up to 4 times. button to enlarge the selected 4. While the image is enlarged, you can: ■ Use the pointer button to move around the screen.
Displaying the Picture-in-Picture Image Make sure your main image source is displayed, then follow these steps to display and use the picture-in-picture window: 1. Press the PinP button on the remote control. 2. Use the PinP button pointer button to reposition the video window. 3. Once the window is the way you want it, press the Enter button; your video continues playing on the screen. Video window 4. When you’re finished using picture-in-picture, press the PinP or pointer button again.
Projecting Images Without a Screen note If the status message indicates that Wall Shot is off, press the Wall Shot button again to turn it on. Even if you don’t have a screen, you can project images onto surfaces like blackboards and colored walls without loss of image color. Your projector has a sensor that measures the conditions of the projection surface and automatically adjusts the colors and shading of your image.
Adjusting Color Corrections for a New Surface Adjust the correction values if you’re projecting on a new surface or in a new location. 1. Press the Wall Shot button on the remote control or projector while you’re projecting an image. Make sure Wall Shot is on. 2. Press the Wall Shot button a couple of times until you see Wall Shot Readjustment as the status in the upper right corner of your screen.
■ Use the pointer button to move the cursor on the screen. ■ Press the Enter button once to left-click, or press it twice to double-click. Press the Esc button to right-click. ■ To drag-and-drop, hold down the Enter button for about one second until it lights. Then use the pointer button to drag the object. When it’s where you want it, press Enter to release it.
Highlighting Your Presentation While you’re projecting, you can display a pointer to call out something on the screen, or draw straight or curved lines to emphasize particular points. You can choose from three pointer tools, and each one can be customized for a different look. Using the Pointer Tool 1. To activate the pointer tool, press the Pointer button on the remote control. A pointer appears on the screen.
Customizing the Pointer Tools You can customize the shape and size of each of the three pointer tools, and choose how fast it moves across the screen. 1. Press the Menu button on the remote control, highlight the Setting menu, highlight Pointer, and press Enter. Choose one of the following pointer shapes: 2. Highlight Return and press Enter. 3. To change the size of the pointer, highlight Pointer Zoom and press Enter. 4. Choose 100% or 200% and press Enter. 5. Highlight Return and press Enter. 6.
1 Connecting to Computers and Other Equipment T his chapter tells you how to connect the projector to a notebook or desktop computer, and/or to video equipment, such as a VCR or DVD player. You can also connect the projector to a video camera, external speakers, and/or an external monitor.
Connecting to a Computer note If you connect a Windowsbased computer to the projector, you may see a New Hardware Wizard saying your computer has found a plug-and-play monitor; if so, click Cancel. note You can connect the PowerLite projector to any computer that has a standard video output (monitor) port, including desktop models, PC notebook and notebook computers, Macintosh PowerBooks and iBooks®, and hand-held devices. You can connect up to two computers at the same time.
Connecting to the Computer Ports You can connect to either Computer/Component port using the VGA computer cable that came with the projector (the monitor port on your computer must be a mini D-sub 15-pin port). 1. If you’re using the VGA computer cable, connect one end to one of the projector’s Computer/Component ports, and the other end to your computer’s monitor port. caution Don’t try to force a connector to fit a port with a different shape or number of pins. You may damage the port or connector. 2.
Using the Macintosh Desktop Adapter If you have an older desktop Macintosh or PowerBook, the VGA cable may not fit when you try to connect it. If so, you’ll need to use the Macintosh desktop adapter to connect the VGA cable to your computer. This is available from Epson (see page 13). 1. To use the adapter, remove its cover as shown and set its DIP switches according to the resolution you want to use, such as 16-inch mode. See your Macintosh documentation for instructions. 2.
Connecting the Cable for Remote Mouse Control If you’ve connected a computer as described in this chapter, you can use the projector’s remote control as a wireless mouse. This lets you control your computer and click through slideshow-style presentations, such as PowerPoint, from up to 33 feet away. The wireless mouse function is supported on systems with a USB port running Windows XP, 98, Me, or 2000, or Macintosh OS X 10.2.x to 10.3.x or OS 8.6 to OS 9.x. 1.
Connecting an External Monitor If you want to monitor your presentation close-up (on a monitor placed beside the projector) as well as on the screen, you can connect an external monitor, such as your computer monitor. To attach an external monitor, connect it to the projector’s Monitor Out port, as shown: External monitor Follow these guidelines to view images on the monitor: 50 ■ The monitor displays the currently selected computer source.
Connecting to Video Equipment You can connect up to four video sources to the projector at the same time. Before starting, look at your video equipment to determine its available video output connections: ■ If your video player has a yellow RCA-style video output connector, see “Connecting a Composite Video Source” on page 52. ■ If your video player has an S-Video connector, see “Connecting an S-Video Source” on page 53.
Connecting a Composite Video Source 1. Locate the RCA-style video cable provided with the projector. 2. Connect the cable to the yellow video output connector on your player and the yellow Video connector on the projector: 3. If you want to play sound through the projector, see page 56 for instructions on connecting an audio cable. 4. If you don’t need to make any other connections, see page 18 for instructions on turning on the projector and adjusting the image.
Connecting an S-Video Source 1. Locate an S-Video cable (one is usually provided with your video equipment or you can purchase one from Epson; see page 12). 2. Connect the cable to the S-Video connector on your player and the S-Video connector on the projector: 3. If you want to play sound through the projector, see page 56 for instructions on connecting an audio cable. 4. If you don’t need to make any other connections, see page 18 for instructions on turning on the projector and adjusting the image.
Connecting a Component Video Source 1. Locate a component-to-VGA video cable. note 2. Connect the cable to your player and one of the Computer/Component connectors on the projector. Be sure your video player is not an RGB video source. If you select the wrong source, image quality may suffer. Check your video player’s documentation. 3. If you want to play sound through the projector, see page 56 for instructions on connecting an audio cable. 4.
Connecting an RGB Video Source 1. Locate the VGA computer cable provided with the projector. 2. Connect the cable to the video port on your player and one of the Computer/Component ports on the projector. note Make sure your video player is not a component video source. If you select the wrong source, image quality may suffer. Check your video player’s documentation. 3. If you want to play sound through the projector, see page 56 for instructions on connecting an audio cable. 4.
Playing Sound Through the Projector You can play sound through the projector’s speaker system or attach an external speaker system. Attaching speakers to the projector instead of directly to the audio source lets you use the projector’s remote control to adjust the sound. Connecting Audio Equipment to the Projector To play sound through the projector, follow these steps: 1. Locate the appropriate commercially available audio cable.
Connecting External Speakers To connect speakers to the projector, follow these steps: 1. Locate the appropriate cable to connect your speakers. Depending on your speakers you may be able to use a commercially available audio cable with a stereo mini-jack connector on one end and pin jacks on the other end. For some speakers, you may have to purchase a special cable or use an adapter. 2. Connect the stereo mini-jack end of the audio cable to the Audio Out port on the projector. 3.
Connecting to Computers and Other Equipment
1 Fine-Tuning the Projector Y ou can use the projector’s on-screen menus to adjust the image, sound, and other features.
Using the Menu System You can use the remote control or the projector’s control panel to access the menus and change settings. Follow these steps: 1. To display the menu screen, press the Menu button. You see a menu screen similar to the one below: Options Menu list The menus are listed on the left and the options available for the highlighted menu are shown on the right. 2. Use the pointer button on the remote control (or the arrow buttons on the projector) to scroll through the menu list.
5. After changing the settings, press the Esc button to save your changes and return to the previous menu (or press it repeatedly to exit the menu system). You can also press the Menu button to exit. Restoring the Default Settings You can use the menu system’s Reset options to restore the factorydefault settings for all the settings listed in a specific menu, or all the settings in all menus.
Adjusting the Image Quality You can use the Image menu to adjust the brightness, sharpness, color, tint, and contrast. If you’re projecting from a computer, there are additional adjustments you can make (see page 63). Adjusting the Image 1. Press the Menu button on the remote control and select the Image menu. You see the Image menu screen. 2.
■ Brightness Lightens or darkens the overall image. ■ Contrast Adjusts the difference between light and dark areas. ■ Sharpness Adjusts the sharpness of the image. ■ Color Adjustment Adjusts the tint of the image (not available for RGB video images). note The Brightness setting changes the opacity of the projector’s LCD panels. You can also change the lamp’s brightness. Select Brightness Control in the Setting menu, then choose High or Low (the default setting is High).
2. Use the pointer button to highlight the desired option, then adjust it as needed: ■ Auto Setup Leave this setting ON to automatically optimize the computer image. Turn it off if you want to save adjustments you have made to the video settings. ■ If your image is distorted (compressed, stretched, partially cut off, or doesn’t completely fill the display area), the projector’s resolution setting may not match that of your computer.
■ Video Signal Leave this setting at Auto unless you are using a 60-Hz PAL system (select PAL60). Adjusting the Image Size, Shape, and Position Whether you’re projecting from a computer or video player, you can use these settings to adjust the size, shape, and position of the image: ■ Resize button Adjusts how an image fits into the display area. For computer images, resizing is normally unnecessary, since the projector automatically resizes the image to make the best use of the display area.
Adjusting the Color The projector provides several ways for you to adjust the color: ■ Color Mode button (also in the Image menu) Lets you quickly adjust the color and brightness for various environments. Use either the remote control or the Color Mode setting in the Image menu. You can save a different setting for each computer and/or video source. Select from these settings: ■ Dynamic: For projecting movies or playing video games in vivid color in a bright room.
Adjusting the Sound You can use the Audio settings to adjust the sound volume or tone. note 1. Press the Menu button on the remote control and select the Setting menu. You can also adjust the volume using the remote control. 2. Choose Audio and press Enter. You see the Audio menu settings: 3. Use the pointer button to highlight the desired option, then adjust it as needed: ■ Volume Adjusts the volume. ■ Tone Adjusts the quality of the sound.
■ Disable the projector’s buttons; this is useful, for example, if you’re projecting in a classroom and you want to ensure that no one touches the projector’s buttons while you’re using the remote control. See page 72. Enabling Password Protection note If you leave the projector plugged in, the Password Protect Release screen will not appear. You only need a password if you unplug and reconnect the power cable. To prevent unauthorized use, you can assign the projector a password.
6. Use the numeric keypad to enter a four digit password. (The default setting is 0000.) note It’s a good idea to write down your password and keep it in a safe place. 7. When you see a confirmation message, reenter the password. Then press the Menu button to exit the screen. 8. Press the Num button on the remote control to deactivate the numeric keypad. 9. If you want to disable the password temporarily, select Timer and press Enter.
Starting the Projector with a Password When the password function is enabled, you see this screen when you plug in and turn on the projector: 1. Press the Num button on the remote control to activate the numeric keypad. 2. Enter the four digit password. The password screen closes, the numeric keypad is automatically deactivated, and projection begins. If the password is not correct, you see the message Wrong password. Please try again.
Creating Your Own Startup Screen You can transfer any image from your computer or video source to the projector and then use it as your startup screen. You can also use it as the screen displayed when the projector is not receiving a signal or when you press the A/V Mute button. The image can be a company logo, slogan, photograph, or any other image you want to use. Capturing the Image Follow these steps to capture the image and transfer it to the projector: 1.
8. When the message Save image as user’s logo? appears, select Yes and press Enter. Saving the logo may take a few moments. Do not use your projector or video source while the logo is being saved. 9. When you see the message Completed, press Esc to return to the menu screen. Choosing When to Display the Image After your image is saved, it is automatically set as the startup screen. You can also save it as the screen you see when there’s no signal or when you press the A/V Mute button (see page 37). 1.
Controlling Multiple Projectors If you’re using more than one projector for your presentation, you can switch between them using a single remote control. To do this, you need to set a different ID for each projector. During the presentation, you can change the remote control’s ID to match that of the projector you want to use. Setting the Projector ID The projector’s default ID is 1. Follow these steps to change it: 1. Press the Menu button on the remote control. You see the projector’s menu screen.
Changing the Remote Control ID To change the remote control’s ID to match the projector’s ID, follow these steps: 1. Press the ID button on the remote control. You see it light. 2. Press one of the numbered buttons on the remote control to select the ID of the projector you want to operate. The ID button’s light shuts off and the new ID is registered. 3. Repeat steps 1 and 2 each time you want to switch projectors. To check the remote control’s current ID, do the following: 1. Press the ID button twice.
Customizing Projector Features You can use the menu system to turn standby mode on or off, adjust the network settings, change the language, and customize the way the projector displays images. Remote Monitoring Setup Options These options let you set up the projector so it can be monitored and controlled from a remote computer (see page 80). ■ Standby Mode (in the Extended menu) Select Network ON to enable the projector to be monitored over a network when it’s in standby mode.
Enabling Quick Setup Options Your projector can quickly adjust the focus, straighten the image, and change the colors for the surface the image is being projected on. Follow these steps to enable these features: 1. Press the Menu button on the remote control. You see the projector’s menu screen. 2. Select the Setting menu and press Enter. Then highlight Quick Setup and press Enter. 3. Select Quick Setup Options and press Enter. 4.
Automatically Running Quick Setup To automatically run quick setup whenever you turn on the projector, follow these steps: 1. Press the Menu button on the remote control. 2. Select the Setting menu and press Enter. note Auomatic Quick Setup works only when the projector is set to Front projection. See page 187 for more information. 3. Choose Quick Setup and press Enter. 4. Select Startup Options and press Enter. 5. Select Quick Setup and press Enter. 6. Press the Menu button to exit.
Fine-Tuning the Projector
1 Managing Projectors T he EasyManagement software for your projector lets you monitor and control your projectors from a remote computer: note If you’re using a network management utility running SNMP, you can configure your network to send trap alerts even without a plug-in (see page 80). This feature is intended for use by network administrators only. ■ Use EMP Monitor (available for Windows only) to see your projectors’ status, switch image sources, and control basic settings.
Connecting and Configuring the Projector on a Wired Network note If you’re a network administrator, you can use the SNMP option to enter a trap IP address. This lets you receive trap alerts for the projectors you’re monitoring. Before using the EasyManagement software to manage your projector(s), you have to connect each projector you want to monitor to your network and configure it with an appropriate IP address. You can connect and configure the projector using the network port.
■ To change the network addresses from the projector’s control panel, press the right and left arrow buttons to select the part of the address you want to enter, then use the up and down arrow buttons to increase or decrease the numeric value. Increase or decrease the value Select the part of the address to change When you finish changing an address in the network menu, press the Enter button (on the remote control) or the Auto/Enter button (on the projector). 5.
Opening and Closing EMP Monitor To start EMP Monitor, click Start > Programs or All Programs > EPSON Projector > EMP Monitor. If you’ve added the program to the Startup programs folder, then it may already be open. If so, click the icon in the system tray on the lower-right corner of your screen to display the EMP Monitor window: Click here to start EMP Monitor To close EMP Monitor, right-click the program icon shown above and select Exit.
2. Click Register projector. You see this screen: Click here 3. Click Auto detect to locate projectors currently operating on the network, or click Manual registration and enter the projector’s network IP address. Any projectors found on the network are listed as shown below: Click here note If Auto detect fails to find the projector, your projector may not be connected or configured correctly for the network. See page 80 to configure your projector for a wired network. 4.
note You see this screen with a list of all registered projectors. To delete a projector from the list, highlight the projector name, and click Delete. 5. Click Close.
Monitoring Your Projectors The EMP Monitor screen lets you monitor your projectors using the Status, Video Source, and Error icons shown below. These let you see which projectors are currently being used, from which source (or port) they are projecting an image, and if a problem occurs. note To monitor a projector when it’s in Standby Mode (plugged in but not turned on), you must select Network ON as the Standby Mode setting in the projector’s Extended menu (see page 75).
Status icons (dark) Turned off; problems detected Network error (for example, not connected to the network or power cable disconnected). You may also see this error if Network OFF is selected in Standby Mode (see page 75).
The following table explains the meaning of the error icons. See page 101 for recommended solutions to problems.
The following table explains the functions of the control buttons: Control buttons Turns the projector on Turns the projector off Changes the video signal to the Computer/Component 1 port Changes the video signal to the Computer/Component 2 port Changes the video signal to the S-Video port Changes the video signal to the Video port Switches the display to EasyMP (Not functional for the PowerLite 830p) 88 Managing Projectors
Using EMP NetworkManager You can use EMP NetworkManager to send messages by e-mail, notifying you when a problem occurs with a projector. Before running EMP NetworkManager, make sure you’ve installed the software as described on page 114. Then follow the steps below to create e-mail settings for each projector you want to monitor. Selecting the Projectors to Monitor 1. To start EMP NetworkManager, click Start > Programs or All Programs > EPSON Projector > EMP NetworkManager.
Setting a Password note Entering a password in EMP NetworkManager will automatically assign that password in EMP Monitor. You can set a password to restrict access to each projector from EMP NetworkManager: 1. Right-click the icon of the projector whose password you want to set, then select Change Password. 2. Enter a password up to 14 characters in length. Creating the E-Mail Settings 1. If EMP NetworkManager is not already running, open it from the Start menu.
3. EMP NetworkManager connects to the projector, and you see this screen: note The projector must be plugged in (projecting or in Standby Mode) for you to be able to connect to it. To access a projector in Standby Mode, you must select Network ON as the Standby Mode setting in the projector’s menu system (see page 75). Remember that when Standby Mode is set to Network ON, the exhaust fan continues to operate after the projector has cooled down. This is normal. 4.
You see this screen: 6. Select ON for the Mail Notification setting. 7. Enter the IP address and port number of the SMTP server used for sending e-mail. (The port’s default setting is 25, but you can enter any number from 1 to 65535.) 8. Enter up to three e-mail addresses where you want the event notification messages to be sent. note A no-signal message is reported when no image signals are being input to a projector.
Understanding the Notification Messages If a projector experiences a problem, it sends an e-mail message to each of the addresses you provided using EMP NetworkManager. The message includes the heading “EPSON Projector” in the subject line. The body of the message contains: ■ The name of the projector ■ The projector’s IP address ■ A description of the problem The problem descriptions are similar to the errors reported by EMP Monitor listed on page 87.
Managing Projectors
1 Maintaining the Projector warning Before you clean any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except the lamp cover. Dangerous electrical voltages in the projector can injure you severely. Do not try to service this product yourself, except as specifically explained in this User’s Guide. Refer all other servicing to qualified service personnel. Y our projector needs little maintenance.
Cleaning the Projector Case caution Do not use wax, alcohol, benzene, thinner, or other chemical detergents. These can damage the case. Before you clean the case, turn off the projector and unplug the power cord. ■ To remove dirt or dust, wipe the case with a soft, dry, lint-free cloth. ■ To remove stubborn dirt or stains, moisten a soft cloth with water and a neutral detergent. Then wipe the case. Cleaning the Air Filters and Vents note To order replacement air filters, request part number V13H134A07.
Replacing the Lamp and Air Filters note The life span of the projection lamp is about 2000 hours if Brightness Control in the Setting menu is set to High (default), and 3000 hours if Brightness Control is set to Low. When you get a replacement lamp for your projector, you should replace the filters. It is time to replace the lamp when: To check how long the lamp has been in use, see page 105. ■ The projected image gets darker or starts to deteriorate.
7. Loosen the screw holding the lamp cover in place (you don’t need to remove it). Then remove the lamp cover. 8. Loosen the two screws holding the lamp in place (you don’t need to remove them). Loosen, but don’t remove these 9. Grasp the handles as shown and pull the lamp straight out. 10. Gently insert the new lamp. (If it doesn’t fit easily, make sure it is facing the right way.
11. Once the lamp is fully inserted, tighten its screws and replace the cover, then tighten the cover screw. (The projector won’t come on if the lamp cover is loose.) 12. Reset the lamp timer as described in the next section. Resetting the Lamp Timer After you replace the lamp, you need to reset the lamp timer using the projector’s menus. 1. Press the Menu button on the remote control or the projector’s control panel. You see the main menu. 2.
Transporting the Projector The projector contains many glass and precision parts. Follow these guidelines to prevent damage: note ■ When shipping the projector for repairs, use the original packaging material if possible. If you do not have the original packaging, use equivalent materials, placing plenty of cushioning around the projector. ■ When transporting the projector a long distance, first place it in a hard-shell shipping case, then pack it in a firm box with cushioning around the case.
1 Solving Problems This chapter helps you solve problems with your projector, and tells you how to contact technical support for problems you can’t solve yourself.
Using On-Screen Help If the image doesn’t look right or your audio isn’t working, you can get help by pressing the blue ? Help button on top of the projector or on the remote control. The following choices are available: ■ Problems with image ■ Problems with sound ■ Language change Follow these steps to get help: 1. Press the blue ? Help button on the projector. ? Help button You see the Help Menu: 2.
Checking Projector Status If your projector isn’t working correctly, first turn it off, wait for it to cool, and unplug it. Then plug the power cord back in and turn on the projector. If this doesn’t solve the problem, check the lights on top of the projector. What To Do When the Lights Flash The lights on top of the projector indicate the projector’s status. Power light Lamp light Temperature light Refer to the following table for a complete description of the projector’s status lights.
Status lights Light Status Description Flashing orange Rapid cooling is in progress. Although this is not an abnormal condition, projection will stop automatically if the temperature rises higher. Make sure there is plenty of space around and under the projector for ventilation, and that the air filters and vents are clear. Red The projector is overheating, which turns the lamp off automatically. Wait until the cooling fan stops, then unplug the power cord.
Viewing Lamp Usage and Other Information Use the Info menu to view information about the display settings of your computer and the number of hours the lamp has been used. Press the Menu button and highlight the Info menu. You see the lamp usage hours and various input signal settings on the right. The life span of the lamp is about 2000 hours if the Brightness Control setting in the Setting menu is set to High (default), and 3000 hours if the Brightness Control setting is set to Low.
You’ve connected a computer and see a blue screen with the message No Signal displayed. ■ Make sure the cables are connected correctly, as described on page 46. ■ Try restarting your computer. ■ If you’ve connected a computer and one or more video sources, you may need to press one of the Source buttons on the projector or remote control to select the correct source. Allow a few seconds for the projector to sync up after pressing the button.
If you’re using Macintosh OS 8.6 to 9.x: 1. From the Apple menu, select Control Panels, then click Monitors and Sound. 2. Click the Arrange icon. 3. Drag one monitor icon on top of the other. This lets you display on the projector screen as well as the LCD screen. 4. If this option isn’t available, click the Monitor icon. 5. Select one of the listed Simulscan resolutions. (Allow a few seconds for the projector to sync up after making the selection.) The message Not Supported is displayed.
■ ■ Macintosh OS 8.6 to 9.x: On the Apple menu, choose Control Panels, and click Monitors and Sound. Select a different resolution. You also may need to modify existing presentation files if you created them for a different resolution. See your software documentation for specific information. The image isn’t square, but keystone-shaped. ■ If the top or bottom of the image is broader, press the Sync + or Sync – button on the projector until the image is square.
The image is blurry. ■ There may be dirt or smears on the lens. Clean the lens as described on page 95. ■ Adjust the focus using the focus buttons (see page 25). ■ Make sure the lens is not fogged by condensation. You may need to wait before using the projector after moving it from a cold environment to a warm environment. ■ Adjust the Sharpness setting on the Image menu (see page 62). When you change video settings, you should be able to see the effect on the screen immediately.
3. Adjust the Sync setting to increase the image sharpness. The image colors are incorrect. note Because of the different technologies used, your projected image may not exactly match the colors on your notebook or computer monitor. ■ If you’re displaying a computer image, use the Color Mode option in the projector’s Image menu to adjust the color. If you’re displaying video, adjust the Color Adjustment and Color Mode settings on the Image menu.
Solving EasyManagement Problems You don’t see your projector in the EMP Monitor window. ■ Make sure that you’ve connected the projector to the network and configured it correctly; see page 80. Also, make sure you’ve registered the projector with EMP Monitor; see page 81. ■ Make sure that Standby Mode in the projector’s Extended menu is set to Network ON. ■ If the computer you are using is running Windows XP or 2000, you must be logged in as the Administrator. ■ Try restarting your computer.
Where To Get Help Epson provides technical assistance through electronic support services 24 hours a day, as listed in the following table. Service Access World Wide Web From the Internet, you can reach Epson’s product support page at http://support.epson.com. After selecting your product, you can access troubleshooting information, download product documentation, and receive technical advice through e-mail.
A Software Installation T he Epson Projector Software CD-ROM includes EMP Monitor and EMP Network Manager for presenting and monitoring the projector from a remote location.
Installing the Software 1. Insert the Epson Projector Software CD-ROM in your computer’s CD-ROM or DVD drive. You see this screen: 2. Click Install, then follow the on-screen instructions to install your projector software. When you see a message that the Epson GDI Monitor Driver has not passed Windows Logo testing, click Continue Anyway. 3. When installation is complete, close the installation window. Now see Chapter 5 for instructions on using the projector software.
A Projector Installation T his appendix provides guidelines on installing the projector in a permanent location, such as a theater or conference room.
If you’re mounting the projector on the ceiling and you place it above screen level, you’ll have to tilt the projector down to position the image on the screen. This causes the image to lose its square shape. You can correct the distortion using the Keystone function in the projector’s menu system (see page 65) or the keystone buttons on the projector’s control panel (see page 27).
A Technical Specifications General Type of display Poly-silicon TFT active matrix Size of LCD panels Diagonal: 0.8 inches (20.3 mm) Resolution (native format) 1024 × 768 pixels (XGA) Color reproduction 24 bit, 16.8 million colors Brightness 3000 lumens (High Brightness mode) 2200 lumens (Low Brightness mode) Contrast ratio 600:1 Image size 30 to 300 inches Projection distance 2.8 to 48.3 feet (0.9 to 14.
Projection Lamp Type UHE (Ultra High Efficiency) Power consumption 200 W Lamp life Approx. 2000 hours (High Brightness mode) Approx. 3000 hours (Low Brightness mode) Part number V13H010L31 Remote Control Range 33 feet (10 meters) Batteries (2) Alkaline AA Dimensions Height 4.5 inches (114 mm), feet retracted Width 14.4 inches (365 mm) Depth 11.0 inches (280 mm) Weight 10.4 lb (4.7 kg) Electrical Rated frequency 50/60 Hz AC Power supply 100 to 120 VAC, 3.6 A 200 to 240 VAC, 1.
Safety United States FCC 47CFR Part 15B Class B (DoC) UL60950 Third Edition Canada ICES-003 Class B CSA C22.2 No. 60950 (cUL) CE Marking Directive 73/23/EEC Directive 89/336/EEC IEC 60950 Third Edition EN 55022, EN 55024 Pixelworks™ DNX™ ICs are used in this projector. Compatible Video Formats The projector supports NTSC, PAL, and SECAM international video standards, as well as the monitor display formats listed below.
Mode Refresh rate (Hz) Resolution XGA—60 XGA—70 XGA—75 XGA—85 XGA—100 XGA—120 60 70 75 85 100 120 1024 × 768 1024 × 768 1024 × 768 1024 × 768 1024 × 768 1024 × 768 SXGA1—70 SXGA1—75 SXGA1—85 SXGA1—100 70 75 85 100 1152 × 864* 1152 × 864* 1152 × 864* 1152 × 864* SXGA2—60 SXGA2—75 SXGA2—85 60 75 85 1280 × 960* 1280 × 960* 1280 × 960* SXGA3—60 SXGA3—75 SXGA3—85 60 75 85 1280 × 1024* 1280 × 1024* 1280 × 1024* UXGA—60 UXGA—65 UXGA—70 UXGA—75 UXGA—80 UXGA—85 60 65 70 75 80 85 1600 × 1200* 1600 ×
A Notices This appendix includes safety instructions and other important information about your Epson PowerLite projector. Important Safety Instructions Follow these safety instructions when setting up and using the projector: ■ Do not place the projector on an unstable cart, stand, or table. ■ Do not use the projector near water or sources of heat. ■ Use the type of power source indicated on the projector. If you are not sure of the power available, consult your dealer or power company.
■ Never push objects of any kind through the cabinet slots. Never spill liquid of any kind into the projector. ■ Except as specifically explained in this User’s Guide, do not attempt to service this product yourself. Refer all servicing to qualified personnel. Opening or removing covers may expose you to dangerous voltages and other hazards.
Remote Control Information You can operate the projector by remote control via a line-of-sight infrared (IR) receiver at the front and rear of the projector. The projector may not respond to remote control commands under the following conditions: ■ There is an object between the remote control IR emitter and the IR receiver on the projector. ■ Ambient light is too bright. ■ Certain types of fluorescent lighting are used. ■ A strong light source shines into the IR receiver.
Declaration of Conformity According to 47CFR, Part 2 and 15, Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers We: Located at: Epson America, Inc. 3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806-2469 Telephone: (562) 290-5254 Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device.
FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception.
Warranty Epson America, Inc. Limited Warranty Basic Two-Year Warranty and 90-Day Lamp Warranty What Is Covered: Epson America, Inc.
THE WARRANTY AND REMEDY PROVIDED ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SOME LAWS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES. IF THESE LAWS APPLY, THEN ALL EXPRESS AND IMPLIED WARRANTIES ARE LIMITED TO THE WARRANTY PERIOD IDENTIFIED ABOVE. UNLESS STATED HEREIN, ANY STATEMENTS OR REPRESENTATIONS MADE BY ANY OTHER PERSON OR FIRM ARE VOID.
Notices
Index A A/V Mute, 37, 72, 105 Accessories, 13, 112 Adapter, Macintosh, 13, 48 Air filter cleaning, 96 ordering, 13 replacing, 97 to 99 Anti-theft device, 13, 17 Aspect ratio, 117 Audio adjusting volume, 67 connecting equipment, 56 to 57 problems, troubleshooting, 110 turning off (using A/V Mute), 37 Auto button, 28 Auto Setup setting, 64 B Background Color setting, 69 Bands, vertical, 109 Batteries, installing, 33 Blackboard, projecting on, 40 to 41 Blank screen, 21 to 23 Blurry image, 109 Brightness, 117
EMP Monitor installing software, 114 problems, 111 using, 81 to 88 EMP NetworkManager, using, 89 to 93 Environmental specifications, 118 Epson accessories, 13, 112 presentation tips, 10 PrivateLine Support, 11, 112 technical support, 10, 112 E-Zoom button, 38 F FCC compliance statement, 125 Filter, see Air filter Focusing image, 25 Freeze button, 37 G Group, saving menu settings as, 64 K H Kensington anti-theft device, 13, 17 Keystone correction, 26 to 27, 65, 108, 117 HDTV images, video formats, 120
M P Macintosh desktop adapter, 13, 48 Manuals, 10 Menus changing settings, 60 to 61 default settings, restoring, 61 Extended, 71 to 73, 75 Image, 62 to 64 Info, 105 Reset, 99 Setting, 67, 72, 76 to 77 Signal, 63 to 65 User’s Logo, 71 to 72 using, 60 to 61 Monitor, connecting external, 50 Monitoring projector EMP Monitor, 81 to 88 HP OpenView, 79 receiving e-mail alerts, 89 to 93 remote setup options, 75 Mouse compatibility, 117 connecting cable for remote, 49 using remote control as, 41 Password protecti
Projector carrying case, 13, 100 cleaning, 95 connections, see Connecting projector disabling buttons, 72 distance from screen, 16, 117 ID, setting, 73 to 74 installing, 115 to 116 lamp specifications, 118 monitoring remotely, 75, 79 to 93 multiple projectors, controlling, 73 to 74 options, 13 password protection, 68 to 70 positioning, 16 to 17 resolution, 117 specifications, 117 to 119 transporting, 100 troubleshooting, 101 to 104 turning off, 29 turning on, 18 to 19 unpacking, 12 viewing information about
Signal menu, 63 to 65 Sleep Mode, 19, 75, 103, 105 SNMP, 79, 80 Software installation, 113 to 114 Sound adjusting, 67 troubleshooting, 110 Source selecting, 20, 34 to 35 viewing, 105 Speaker, specifications, 117 Speakers, connecting, 57 Specifications brightness, 117 dimensions, 118 electrical, 118 environmental, 118 general, 117 lamp, 118 remote control, 118 resolution, 117 safety, 119 sRGB color mode, 62, 66 Standby Mode, 18, 75, 85, 87, 91, 103, 105 Startup screen creating, 71 to 72 user’s logo, see User
Index
1015.eps 12 0004.eps 12 001.eps 25 002.eps 20 003_E.tif @ 300 dpi 114 1015.eps 19 1015.eps 95 1019.eps 33 1019.EPS 33 1020.eps 33 1021.eps 33 1021.EPS 33 1029a.eps 115 1029b.eps 115 1030a.eps 115 1030b.eps 115 1031.eps 17 1031.eps 17 1031.eps 17 2043.eps 18 2050-1.eps 24 2052_1.eps 26 2058-E.tif 36 2060.eps 25 2062.eps 28 2068a.eps 39 2068b.eps 39 3201.eps 25 4112-0.eps 43 4121.eps 96 4123.eps 103 4125.eps 98 4126a.eps 98 4126b.eps 98 4130-2.eps 97 4134.eps 24 5002.eps 35 77_p_s.eps 110 A.
E EMN04.eps 83 E EMN09.eps 84 E EMN09.eps 85 E-1015b.eps 102 E-1015b.eps 27 E-1015b.eps 34 E-1016-14-1-F.eps 56 E-1018.eps 12 E-1018.eps 27 E-1018.eps 28 E-1018.eps 34 E-1018.eps 35 E-1018.eps 39 E-1018.eps 41 E-1018.eps 42 E-1018.eps 49 E-1022.eps 19 E-1022.eps 32 E-1032a-F.eps 47 E-1035b-F.eps 49 E-1036.eps 50 E-1038b.eps 52 E-1039aa.eps 53 E-1039bbb-F.eps 54 E-1039d-F.eps 55 E-1039g.eps 57 E-2045.eps 18 E-2047.eps 20 E-2060.eps 66 E-2068.eps 39 E-3069.eps 37 E-3071.eps 37 E-3072-1.eps 65 E-3074.
EMN10.eps 85 EMN11.eps 85 EMN11.eps 85 EMN12.eps 85 EMN12.eps 85 EMN13.eps 86 EMN13.eps 86 EMN14.eps 86 EMN14.eps 86 EMN15.eps 86 EMN15.eps 86 EMN16.eps 86 EMN16.eps 86 EMN17.eps 86 EMN17.eps 86 EMN18.tif @ 150 dpi 86 EMN19.eps @ 150 dpi 87 EMN19.eps 87 EMN19.eps 88 EMN21.tif @ 150 dpi 87 EMN21.tif 87 EMN21.tif 88 EMN22.eps @ 150 dpi 87 EMN22.eps 87 EMN23.tif @ 150 dpi 87 EMN23.tif 87 EMN23.tif 88 EMN24.eps @ 150 dpi 87 EMN24.eps 87 EMN24.eps 88 EMN25.tif @ 150 dpi 87 EMN25.tif 87 EMN25.tif 88 EMN25.
EMP-inputB.tif @ 300 dpi 86 EMP-InputB-B.tif @ 300 dpi 88 enter key.eps 81 Fn.eps 21 Fn.eps 21 headphone_icon.eps 110 houkou_button.eps 102 houkou_button.eps 108 houkou_button.eps 27 houkou_button.eps 35 houkou_button.eps 35 houkou_button.eps 36 houkou_button.eps 38 houkou_button.eps 38 houkou_button.eps 39 houkou_button.eps 39 houkou_button.eps 42 houkou_button.eps 42 houkou_button.eps 42 houkou_button.eps 42 houkou_button.eps 43 houkou_button.eps 60 houkou_button.eps 60 houkou_button.eps 60 houkou_button.
image shape 1.eps 26 image shape 2.eps 26 image shape 3.eps 26 imagesize2.eps 16 Kilroy.tif @ 144 dpi 39 lamp light.eps 104 lamp light.eps 104 lamp light.eps 104 lamp_light.eps 97 lamp_light.eps 97 light button.eps 32 light button.eps 33 mac1.eps 48 mac6.eps 48 Mac-arrange-mod.tif 23 Mac-simulscan.tif @ 72 dpi 23 monitor 1.TIF @ 96 dpi 82 monitor 10 - program icon 2.TIF @ 96 dpi 82 monitor 2.TIF @ 96 dpi 83 monitor 7.TIF @ 96 dpi 87 monitor_icon.eps 106 monitor_icon.eps 106 Network Manager 2.
screen-E-3101.tif @ 300 dpi 61 screen-E-4106.tif @ 300 dpi 102 screen-E-4130a.tif @ 300 dpi 99 screen-E-4130b.tif @ 300 dpi 99 screen-E-4133.tif 71 screen-E-5003.tif 68 screen-Wall Shot ONl.tif 40 slider bar.eps 60 sound_icon.eps 110 s-video connector.eps 51 sync 2.tif @ 72 dpi 110 temperature light.eps 103 temperature light.eps 104 temperature light.eps 104 temperature light.eps 104 tracking 2.tif @ 72 dpi 109 unpacking 0005.eps 12 unpacking 0008.eps 12 VGA port.eps 51 wallshot.TIF @ 300 dpi 40 zoom_-.
Art/Mac-arrange-mod.tif 23 Art/Mac-simulscan.tif @ 72 dpi 23 Art/2050-1.eps 24 Art/4134.eps 24 Art/3201.eps 25 Art/001.eps 25 Art/2060.eps 25 Art/2052_1.eps 26 art/image shape 1.eps 26 Art/image shape 3.eps 26 Art/image shape 2.eps 26 Art/E-1015b.eps 27 Art/houkou_button.eps 27 Art/E-1018.eps 27 Art/E-1018.eps 28 Art/2062.eps 28 Art/E-5010.eps 28 Art/screen-E-2046a.tif @ 300 dpi 29 Art/directpower.TIF @ 300 dpi 30 Art/E-1022.eps 32 Art/light button.eps 32 art/light button.eps 33 art/1019.EPS 33 Art/1019.
Art/E-3074.eps 38 art/houkou_button.eps 38 art/zoom_+.eps 38 art/houkou_button.eps 38 art/zoom_-.eps 38 Art/E-1018.eps 39 art/houkou_button.eps 39 art/powerpoint00.tif @ 300 dpi 39 art/Kilroy.tif @ 144 dpi 39 Art/houkou_button.eps 39 art/2068a.eps 39 art/2068b.eps 39 Art/E-2068.eps 39 Art/E-5020.eps 40 Art/screen-Wall Shot ONl.tif 40 Art/wallshot.TIF @ 300 dpi 40 Art/E-1018.eps 41 art/houkou_button.eps 42 Art/houkou_button.eps 42 art/houkou_button.eps 42 Art/houkou_button.eps 42 Art/E-1018.
art/mac1.eps 48 Art/E-1018.eps 49 art/A.eps 49 Art/E-1035b-F.eps 49 Art/E-1036.eps 50 Art/s-video connector.eps 51 Art/RCA connector.eps 51 Art/VGA port.eps 51 Art/E-1038b.eps 52 Art/E-1039aa.eps 53 Art/E-1039bbb-F.eps 54 Art/E-1039d-F.eps 55 Art/E-1016-14-1-F.eps 56 Art/E-1039g.eps 57 Art/E-5006.eps 60 Art/screen-E-3089big.tif 60 art/houkou_button.eps 60 art/houkou_button.eps 60 art/houkou_button.eps 60 art/houkou_button.eps 60 art/slider bar.eps 60 art/on-off.eps 60 art/houkou_button.
Art/password.TIF @ 150 dpi 70 Art/screen-E-4133.tif 71 art/houkou_button.eps 71 Art/E-5017.eps 74 art/E-5018.eps 74 Art/E-5018.eps 74 Art/quickset-options.tif @ 150 dpi 76 Art/quickset-select.TIF @ 150 dpi 77 Art/E-5018.eps 80 Art/arrow buttons u & d.eps 81 Art/arrow buttons l & r.eps 81 art/enter key.eps 81 art/monitor 10 - program icon 2.TIF @ 96 dpi 82 art/monitor 1.TIF @ 96 dpi 82 art/monitor 2.TIF @ 96 dpi 83 Art/E EMN04.eps 83 Art/EMN06.eps 84 Art/E EMN09.eps 84 art/EMN10.eps 85 Art/EMN10.
Art/EMN18.tif @ 150 dpi 86 Art/EMN19.eps 87 Art/EMN19.eps @ 150 dpi 87 Art/EMN21.tif 87 Art/EMN21.tif @ 150 dpi 87 Art/EMN25.tif 87 Art/EMN25.tif @ 150 dpi 87 art/EMN22.eps 87 Art/EMN22.eps @ 150 dpi 87 Art/EMN23.tif 87 Art/EMN23.tif @ 150 dpi 87 art/EMN24.eps 87 Art/EMN24.eps @ 150 dpi 87 art/EMN26.eps 87 Art/EMN26.eps @ 150 dpi 87 art/monitor 7.TIF @ 96 dpi 87 Art/EMN19.eps 88 Art/EMN28.tif @ 150 dpi 88 Art/EMN21.tif 88 Art/EMN30.tif @ 150 dpi 88 Art/EMN25.tif 88 Art/EMP-InputA-B.
Art/4121.eps 96 art/lamp_light.eps 97 art/lamp_light.eps 97 Art/4130-2.eps 97 art/4125.eps 98 Art/4126a.eps 98 Art/4126b.eps 98 art/houkou_button.eps 99 Art/screen-E-4130a.tif @ 300 dpi 99 Art/screen-E-4130b.tif @ 300 dpi 99 Art/E-1015b.eps 102 Art/screen-E-4106.tif @ 300 dpi 102 Art/houkou_button.eps 102 Art/4123.eps 103 art/power_light.eps 103 art/power_light.eps 103 art/power_light.eps 103 art/power_light.eps 103 Art/temperature light.eps 103 Art/temperature light.eps 104 Art/temperature light.
Art/Pixelworks_DNX_Blk.
14
