Operation Manual

9
Top
Safety Instructions
Specications
Troubleshooting
Part Names and
Functions
Start Here
Cleaning
Initializing the
Settings
Purpose-based Index
Key Menu Index
Frame and Table Lists
Start Here
1. Installing the Li-ion battery
Before using the printer for the rst time, charge the
Li-ion battery (C52CE97010). Read also the safety
precautions for the rechargeable battery described
previously in this manual.
For details on the handling of Li-ion battery, see
"C52CE97010 Lithium-ion Battery Pack User's Manual".

Charging the Li-ion battery
You can charge the dedicated Li-ion battery (C52CE97010)
with the printer.
To charge the battery, connect the AC adapter to
the printer with the Li-ion battery installed.
Charging error
Charging completed
Charging
Charge LED
WARNING
Be sure to use the dedicated Li-ion battery (C52CE97010) . Using a battery
other than the one specied may cause re, explosion, leakage, overheating
or ohter damage.
CAUTION
When disposing of used batteries, make sure to follow the regulations.
1. Open the battery cover.
2. Install the Li-ion battery in the
correct orientation.
3. Close the battery cover.
MEMO
• The Li-ion battery cannot be charged while printing.
• When the power of the charged Li-ion battery seems to run out quickly,
replace it with new ones.
• There is likely to be a charging error or battery error in the following cases.
Contact Epson customer support center.
- The charge LED ashes during charging.
- New Li-ion battery takes signicantly longer to charge than the
estimated charging time (less than 3 hours).