Warranty Statement

4) Make sure the print head is in the home (far right) position. Lock the print head by pushing

the green tab to the right.

5) Raise the ink levers. Turn off the printer and unplug the power cord.

CAUTION: Do not turn off the printer by unplugging it or turning off a power strip. You will not

be able to lock the print head in the home position, and ink left inside the reservoir will leak

out, damaging the printer.

6) If you have installed any optional components (for example, the EpsonNet print server

card), remove them before shipping.

WARNING: Components may be hot. After turning off and unplugging the printer, make sure

you allow each component to cool before handling it.

7) If you need to ship the printer, repack it using the original box and packing materials. If you

do not have the original box or packaging, contact Epson to arrange to obtain these.

8) If you are transporting the printer for carry-in service, leave the ink cartridges installed and

raise the ink levers. For carry-in service, you do not need to package the printer, but you must

transport it in a horizontal position on a flat, stable surface. If you are transporting the printer

in your own vehicle without the original packaging, make sure you wrap and pack the printer

securely.

What This Warranty Does Not Cover:

This warranty does not cover:

1) Any damage caused by using improper packaging materials or improper packaging and

shipping. Under the Whole Unit Exchange or Repair Programs you may be billed for these

damages.

2) Any damage caused by using unsuitable inks or ink delivery systems in the printer.

3) Any damage caused by use of non-Epson inks, ink cartridges, or media.

EPSON

Preferred

Limited Warranty Program for the EPSON Stylus

Pro 4000