User’s Guide
Notations Used in This Guide • Safety indications The documentation and the projector use graphical symbols to show how to use the projector safely. Please understand and respect these caution symbols in order to avoid injury to persons or property. Warning This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.
Contents 3 Notations Used in This Guide . . . . . . . . . . . . . . . . . . . . . . . . 2 Screen Size and Approximate Projection Distance . . . . . . . . . . . . . . . . . . . . . . . 20 Connecting Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Connecting a Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Connecting Image Sources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 4 Changing the aspect ratio for computer images . . . . . . . . . . . . . . . . . . . . . . . 42 Configuration Menu Using the Configuration Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Useful Functions List of Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Projection Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Projecting Without a Computer (Slideshow) . . . . . . . . . . .
Contents Images are fuzzy, out of focus, or distorted . . . . . . . . . . . . . . . . . . . . . . . . Interference or distortion appear in images . . . . . . . . . . . . . . . . . . . . . . . . The image is truncated (large) or small, or the aspect is not suitable . . . . . . . Image colors are not right . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Images appear dark . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Problems when Projection Starts .
Contents Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127 Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 General Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 About Notations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 General Notice: . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction This chapter explains the projector's features and the part names.
Projector Features 8 • Make easy height adjustments with one lever. • No cool down delay makes it easy to put away. List of Functions by Model Available functions differ depending on the model being used. See the table below for a list of the functions available for each model.
Projector Features 9 Detecting projector movements and automatically correcting image distortion This projector automatically corrects keystone distortion and focus problems which occur when positioning or moving the projector. For EB-1775W Automatically corrects vertical and horizontal keystone distortion.
Part Names and Functions 10 All of the features in this guide are explained using illustrations of EB-1775W unless otherwise mentioned. Front/Top EB-1770W EB-1760W EB-1750 Name A Air exhaust vent Function Exhaust vent for air used to cool the projector internally. Name B Wireless LAN indicator (EB-1775W/EB-1770W/ EB-1760W only) Displays the access status of the supplied or optional Wireless LAN unit.
Part Names and Functions Name 11 Function O Control panel Operates the projector. s "Control Panel" p.13 P Lamp cover Open when replacing the projector's lamp. s "Replacing the Lamp" p.103 Rear Name Function A Power inlet Connects the power cable to the projector. s "From Installation to Projection" p.26 B Video port Inputs composite video signals from video sources. C Computer port Inputs image signals from a computer and component video signals from other video sources.
Part Names and Functions Name 12 Function G Audio port Connects an audio cable to output audio from the projector's speakers. H Remote receiver Receives signals from the remote control. s "Remote control operating range" p.17 I Lamp Cover Fixing Screw Screw to fix the lamp cover in place. J Security slot The security slot is compatible with the Microsaver Security System manufactured by Kensington. s "Anti-Theft Lock" p.
Part Names and Functions 13 Name Function C Front adjustable foot When setup on a surface such as a desk, extend the foot to adjust the position of the image. s "Adjusting the Image Position" p.37 D Screw hole for the wireless LAN unit cover (EB-1775W/EB-1770W/ EB-1760W only) Screw hole to fix the wireless LAN unit cover. Control Panel Name Function A [t] button Turns the projector power on or off. s "From Installation to Projection" p.
Part Names and Functions Name 14 Function E [w][v] buttons • Performs vertical keystone correction. s "Correcting keystone distortion in vertical directions" p.34 • If pressed when the Configuration menu or the Help screen is displayed, these buttons select menu items and setting values. s "Using the Configuration Menu" p.67 s "Using the Help" p.87 F [Help] button Displays and closes the Help screen which shows you how to deal with problems if they occur. s "Using the Help" p.
Part Names and Functions Name 15 Function A [t] button Turns the projector power on or off. s "From Installation to Projection" p.26 B [Computer] button Changes to images from the Computer port. C [Video] button Each time you press the button, the input source changes between images from the Video port and the HDMI port (EB-1775W/EB-1770W/EB-1760W only). D [Screen Fit] button Adjusts the projected image so that it fits the screen frame.
Part Names and Functions Name 16 Function N [Enter] button • When the Configuration menu or the Help screen is displayed, it accepts and enters the current selection and moves to the next level. s "Using the Configuration Menu" p.67 • Acts as a mouse's left button when using the Wireless Mouse function. s "Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse)" p.54 O [Esc] button • Stops the current function.
Part Names and Functions 17 Replacing the remote control batteries If delays in the responsiveness of the remote control occur or if it does not operate after it has been used for some time, it probably means that the batteries are becoming flat. When this happens, replace them with new batteries. Have two AA size manganese or alkaline batteries ready. You cannot use other batteries except for the AA size manganese or alkaline.
Preparing the Projector This chapter explains how to install the projector and connect projection sources.
Installing the Projector 19 Installation Methods Warning The projector supports the following four different projection methods. Install the projector according to the conditions of the installation location. • Project images from in front of the screen. (Front projection) • Project images from behind a translucent screen. (Rear projec‐ tion) • Suspend the projector from the ceiling and project images from in front of a screen.
Installing the Projector If the projector is installed at an angle to the screen, keystone distortion occurs in the projected image. See the following for more information on correcting keystone distortion. 20 For EB-1775W/EB-1770W/EB-1760W 16:10 Screen Size s "Automatically Adjust to Fit the Screen Frame - Screen Fit - (EB-1775W only)" p.31 150” (320×200cm) s "Correcting Keystone Distortion" p.33 100” (220×130cm) 80” (170×110cm) 50” (110×67cm) a 5m Place the projector on a level surface.
Connecting Equipment 21 This section gives examples of how to connect the projector and the projection source. Illustrations in this section are of EB-1775W/EB-1770W/EB-1760W. The port name, location, and connector orientation differ depending on the source being connected. Connecting a Computer To project images from a computer, connect the computer using one of the following methods.
Connecting Equipment 22 Connecting Image Sources To project images from DVD players or VHS video and so on, connect to the projector using one of the following methods. A When using a commercially available video cable Connect the video output port on the image source to the projector's Video input port using a commercially available video cable. To output audio from the projector's speaker, you need to connect a commercially available audio cable.
Connecting Equipment 23 Connecting USB Devices You can connect devices such as USB memory, the optional Document Camera, and USB compatible hard disks and digital cameras. Using the USB cable supplied with the USB device, connect the USB device to the USB (Type A) port on the projector. USB Type A When the USB device is connected, you can project image files on the USB memory or digital camera using Slideshow. s "Slideshow examples" p.
Connecting Equipment 24 Removing USB devices After finishing projecting, remove USB devices from the projector. For devices such as digital cameras or hard disks, turn off the device and then remove it from the projector.
Basic Usage This chapter explains how to project and adjust images.
Projecting Images 26 From Installation to Projection This section explains the procedure for connecting the projector to a computer with the computer cable and projecting images. a The method for changing differs depending on the computer being used. See the documentation supplied with the computer. If the image is not projected, you can change the projected image using one of the following methods. • Press the [Source Search] button on the control panel or the remote control.
Projecting Images 27 Automatically Detect Input Signals and Change the Projected Image (Source Search) Press the [Source Search] button to project images from the port currently receiving an image. Because only images from ports receiving an image are projected, you can quickly project the image you want.
Projecting Images 28 Switching to the Target Image by Remote Control You can change directly to the target image by pressing the following buttons on the remote control. Remote control Projecting with USB Display You can use the supplied USB cable to connect the projector to a computer to project images from the computer. To start USB Display, set USB Type B to USB Display from the Configuration menu. s Extended - USB Type B p.
Projecting Images 29 Connecting for the first time For Mac OS OS Mac OS X 10.5.1 or later Mac OS X 10.6.x CPU Power PC G4 1GHz or faster Recommended: Core Duo 1.83GHz or faster Amount of Memory 512 MB or more Hard Disk Free Space 20 MB or more Display Resolution of no less than 640x480 and no higher than 1680x1200. Display color in 16-bit color or greater The first time you connect the projector and the computer using the USB cable, the driver needs to be installed.
Projecting Images a • If it is not installed automatically, double-click My Computer - EPSON_PJ_UD - EMP_UDSE.EXE on your computer. • If nothing is projected for some reason, click All Programs EPSON Projector - EPSON USB Display - EPSON USB Display Vx.xx on your computer. • When using a computer running Windows 2000 under user authority, a Windows error message is displayed and you may not be able to use the software.
Adjusting Projected Images Automatically Adjust to Fit the Screen Frame Screen Fit - (EB-1775W only) Screen Fit is a function that corrects the projected image so that it aligns with the frame (outer border) of the screen, white board, and so on. By pressing the [Screen Fit] button on the remote control or the control panel, the projected image is adjusted to fit the screen, and keystone correction and focus adjustments are performed automatically.
Adjusting Projected Images b 32 Adjust the zoom ring so that the yellow frame is bigger than the screen frame as shown below. Position the black message box in the center of the screen. a d Once the adjustment screen appears, do not move the projector or block the image. The projected image will not be corrected properly. After the correction is performed, the following message appears. To exit the correction menu, press the [Esc] button on the remote control or the control panel to clear the message.
Adjusting Projected Images a • Screen Fit corrects the projected image when it detects two or more sides inside the projected area, and aligns with the detected frame. For example, when projecting onto a wide screen in a small room, you can make corrections by fitting the top and bottom sides of the screen into the projected area. • Screen Fit may not work well in dark environments, such as a room with lights turned off. In this case, make the room brighter, and then try executing Screen Fit again.
Adjusting Projected Images 34 When the projector remains still for about two seconds after it detects movement, it displays a screen for adjustment and then automatically corrects the projected image. a • Auto H/V-Keystone only works when Projection is set to Front from the Configuration menu. s Extended - Projection p.74 • If you do not want to use the Auto H/V-Keystone function, set Auto H/V-Keystone to Off. s Settings - Keystone - H/V-Keystone - Auto H/V-Keystone p.
Adjusting Projected Images a Press the [Menu] button while projecting. s "Using the Configuration Menu" p.67 Using the remote control b 35 Using the control panel Select Keystone from Settings. d Using the [ ], [ remote control, or the [ ], [ ], [ ], and [ ], [ ] buttons on the ], and [ ] buttons on the control panel, select the corner to correct, and then press the [Enter] button. c Select Quick Corner, and then press the [Enter] button.
Adjusting Projected Images e Using the [ ], [ remote control, or the [ 36 ], [ ], [ ], and [ ], [ ] buttons on the ], and [ ] buttons on the control panel, correct the position of the corner. If the triangle in the direction you are adjusting the shape turns gray, as shown in the screenshot below, you cannot adjust the shape any further in that direction.
Adjusting Projected Images T 37 Adjusting the Horizontal Tilt W Extend and retract the rear feet to adjust the projector's horizontal tilt. T W W T A Extend the rear foot. B Retract the rear foot. Adjusting the Image Position Press the foot lever to extend and retract the front foot. You can adjust the position of the image by tilting the projector up to 14 degrees. Correcting the Focus You can correct the focus using one of the following methods.
Adjusting Projected Images • Turn the focus ring to adjust the focus. (EB-1770W/EB-1760W/EB-1750 only) 38 • Adjust the volume from the Configuration menu. s Settings - Volume p.73 Caution Do not start at high volume. A sudden excessive volume may cause loss of hearing. Always lower the volume before powering off, so that you can power on and then gradually increase the volume.
Adjusting Projected Images Mode Blackboard 39 Application Even if you are projecting onto a blackboard (greenboard), this setting gives your images a natural tint, just like when projecting onto a screen. Whiteboard Ideal for making presentations using a whiteboard. Customized Select Customized if you want to adjust the R, G, B, C, M, and Y settings in the Color Adjustment submenu of the Configuration menu.
Adjusting Projected Images a Auto Iris can be set only when the Color Mode is Dynamic, Theatre, or Customized. Changing the Aspect Ratio 40 Changing the aspect ratio for video equipment images For EB-1775W/EB-1770W/EB-1760W Each time the button is pressed, the aspect ratio changes in the order of Normal or Auto, 16:9, Full, Zoom, and Native.
Adjusting Projected Images A Normal B 4:3 C 16:9 * When a 720p/1080i signal is input, the display is in a zoomed 4:3 format (the image is cut off on the right and left sides).
Adjusting Projected Images 42 Changing the aspect ratio for computer images For EB-1775W/EB-1770W/EB-1760W Each time the button is pressed, the aspect ratio changes in the order of Normal or Auto, 16:9, Full, Zoom, and Native. Computer Input Resolution Aspect Ratio XGA (1024x768) 4:3 WXGA (1280x800) 16:10 Projector Aspect Setting Normal/Auto * 16:9 Full Zoom Native * Only available when the source is HDMI.
Adjusting Projected Images 43 Computer Input Resolution WXGA (1280x800) a Aspect Ratio Projector Aspect Setting Normal 4:3 16:9 16:10 If parts of the image are missing, set the Resolution setting to Wide or Normal from the Configuration menu, according to the size of the computer panel. s Signal - Resolution p.
Useful Functions This chapter explains useful tips for giving presentations, and the Security functions.
Projection Functions 45 Projecting Without a Computer (Slideshow) By connecting a USB storage device such as a USB memory or a USB hard disk to the projector, you can project the files stored on the device without using a computer. This function is called Slideshow. You can make presentations with just a USB storage device and the projector by converting PowerPoint files to scenarios using the supplied EasyMP Slide Converter, and then saving them to the USB storage device.
Projection Functions 46 • JPEG files are displayed as thumbnails (file contents are displayed as small images). Projecting PowerPoint files converted in EasyMP Slide Converter PPT fse sit • Scenarios (FSE files and SIT files) are displayed as thumbnails as the first image in the slide. • Other files or folders are displayed as icons as shown in the following table.
Projection Functions a 47 • When AutoRun is set for a scenario, it is automatically played back with the highest priority over other input sources. If you want to stop it from playing back, press the [Esc] button on the remote control. • You can also insert a memory card into a USB card reader and then connect the reader to the projector. However, some commercially available USB card readers may not be compatible with the projector.
Projection Functions b While projecting, press the [ 48 ] or [ ] button. Stopping Slideshow b Press the [ c Press the [Enter] button. ], [ ], [ ], and [ ] buttons to select the image file you want to project. The image is displayed. To close Slideshow, disconnect the USB device from the USB port on the projector. For digital cameras, hard disks, and so on, turn off the power to the device and then remove.
Projection Functions 49 Projecting image files in a folder in sequence (Slideshow) You can project the image files in a folder in sequence, one at a time. This function is called Slideshow. Use the following procedure to run Slideshow. a a To change files automatically when you run Slideshow, set Screen Switching Time from Option in Slideshow to anything other than No. The default setting is 3 seconds.
Projection Functions 50 A B C D Next Slide Previous Slide Next Slide or Animation Previous Slide or Animation The following functions can be used when projecting a scenario or image file with Slideshow. • Freeze s "Freezing the Image (Freeze)" p.52 • A/V Mute s "Hiding the Image and Sound Temporarily (A/V Mute)" p.51 • E-Zoom s "Enlarging Part of the Image (E-Zoom)" p.
Projection Functions 51 Hiding the Image and Sound Temporarily (A/V Mute) You can use this when you want to focus the audience's attention on what you are saying, or if you do not want to show details such as when you are changing between files during presentations from a computer. c Display Order You can select to display the files in Name Order or Date Order. Sort Order You can select to sort the files In Ascending or In Descending order.
Projection Functions a • If you use this function when projecting moving images, the images and sound continue to be played back by the source, and you cannot return to the point where A/V Mute was activated. 52 a • You can select the screen displayed when the [A/V Mute] button is pressed from the Configuration menu. s Extended - Display - A/V Mute p.74 • When the A/V mute slide is closed for approximately 30 minutes, Lens Cover Timer activates and the power is automatically turned off.
Projection Functions b Move the Pointer icon ( 53 ). Enlarging Part of the Image (E-Zoom) Remote control When pressed in conjunction with the adjacent [ [ ], and [ a This is useful when you want to expand images to see them in greater detail, such as graphs and tables. ], [ ], ] buttons, the pointer can be moved diagonally. You can use Pointer Shape to set the shape of the pointer icon. s Settings - Pointer Shape p.73 a Start E-Zoom.
Projection Functions b Move the Cross ( 54 ) to the area of the image that you want to enlarge. Remote control a • The enlargement ratio appears on the screen. The selected area can be enlarged to between 1 to 4 times in 25 incremental steps. • During enlarged projection, press the [ [ ], and [ ], [ ], ] buttons to scroll the image. • If E-Zoom is selected, Progressive and Noise Reduction are cancelled.
Projection Functions 55 Windows OS * Windows Windows Windows Windows Windows Windows Windows Drag and drop Mac OS 98 98SE Me 2000 XP Vista 7 Mac Mac Mac Mac OS OS OS OS X X X X While holding down the [Enter] button, 10.3.x 10.4.x 10.5.x 10.6.x press the [ [ ], [ ], [ ], and ] buttons. Release the [Enter] button to drop at the desired location. It may not be possible to use the Wireless Mouse function under some versions of the operating systems.
Projection Functions a 56 • When pressed in conjunction with the adjacent [ [ ], [ ], and [ ], ] buttons, the pointer can be moved diagonally. • If the mouse button settings are set to reverse on the computer, the operation of the remote control buttons will also be reversed. • The Wireless Mouse function cannot be used while the following functions are being used.
Projection Functions 57 Setting the Projector ID a Choose the ID you want to set and press the [Enter] button. d Press the [Menu] button to finish making settings. Press the [Menu] button while projecting. s "Using the Configuration Menu" p.67 Using the remote control b c Select Projector ID from Extended. Using the control panel Setting the remote control ID Set the ID on the remote control each time you switch the projector power on.
Projection Functions a Point the remote control at the remote receiver of the target projector and press the [ID] button on the remote control. When you press the [ID] button, the current Projector ID is displayed on the projection screen. It disappears in about three seconds.
Projection Functions a Press the [Menu] button. b Select Multi-screen from Extended. 59 • When you select Level 5, all the images are adjusted to the darkest image from multiple projectors. • When you select Level 1, all the images are adjusted to the brightest image from multiple projectors. • When you select Level 2 to Level 4, all the images are adjusted to the mid-range brightness image from multiple projectors.
Projection Functions 60 a Saving a User's Logo You can save the image that is currently being projected as a User's Logo. a a Once a User's Logo has been saved, the logo cannot be returned to the factory default. Project the image you want to save as the User's Logo, and then press the [Menu] button. s "Using the Configuration Menu" p.
Projection Functions Remote control a e 61 f Select the zoom factor from the zoom setting screen. g When the message "Save this image as the User's Logo?" is displayed, select Yes. You can save at 400x300 dots in size. When you press the [Enter] button and the message "Select this image?" is displayed, select Yes. The image is saved. After the image has been saved, the message "Completed." is displayed. a • When a User's Logo is saved, the previous User's Logo is erased.
Security Functions The projector has the following enhanced security functions. • Password Protect You can limit who can use the projector. • Control Panel Lock You can prevent people changing the settings on the projector without permission. s "Restricting Operation (Control Panel Lock)" p.64 • Anti-Theft Lock The projector is equipped with the following anti-theft security device. s "Anti-Theft Lock" p.
Security Functions a • If Password Protect is already activated, you must enter the password. If the password is entered correctly, the Password Protect setting menu is displayed. s "Entering the Password" p.63 63 (3) While holding down the [Num] button, enter a four digit number using the numeric buttons. The number entered is displayed as "* * * *". When you enter the fourth digit, the confirmation screen is displayed.
Security Functions When you enter the correct password, Password Protect is temporarily released. Attention • If an incorrect password is entered three times in succession, the message "The projector's operation will be locked." is displayed for approximately five minutes, and then the projector switches to standby mode. If this happens, disconnect the power plug from the electrical outlet and then reinsert it and turn the projector's power back on.
Security Functions 65 Anti-Theft Lock As an anti-theft measure, the projector is equipped with a security slot compatible with the Microsaver Security System manufactured by Kensington. See the following for more details on the Microsaver Security System. s http://www.kensington.com/ d Select Yes when the confirmation message is displayed. The control panel buttons are locked according to the setting you chose. a You can release the control panel lock by one of the following two methods.
Configuration Menu This chapter explains how to use the Configuration menu and its functions.
Using the Configuration Menu This section explains how to use the Configuration menu. Although steps are explained using the remote control as an example, you can perform the same operations from the control panel. Check the guide under the menu for the available buttons and their operations. a 67 c Select a submenu item. ① Display the Configuration menu screen. ② d b Change settings. ① Select a top menu item. ① ① ② ② e Press the [Menu] button to finish making settings.
List of Functions 68 Top Menu Name Configuration Menu Table Submenu Name Video Signal Auto, NTSC, NTSC4.43, PAL, M-PAL, N-PAL, PAL60, and SECAM Aspect Normal, 4:3, 16:9, Full, Zoom, and Native Overscan Auto, Off, 4%, and 8% Keystone H/V-Keystone and Quick Corner Control Panel Lock Full Lock, Partial Lock, and Off Settable items vary depending on the model being used and the image signal and source being projected. Top Menu Name Image menu s p.70 Signal menu s p.
List of Functions Top Menu Name 69 Submenu Name Multi-screen Info menu s p.84 Reset menu s p.84 Setting Values Top Menu Name Adjustment Level, Brightness Correct., Color Correct. (G/R), and Color Correct. (B/Y) Wireless LAN menu s p.79 Channel 1ch, 6ch, and 11ch Wireless LAN system 802.11b/g and 802.
List of Functions 70 Submenu Image Menu Settable items vary depending on the image signal and source currently being projected. Setting details are saved for each image signal. Sharpness You can adjust the image sharpness. Abs. Color Temp. (This item cannot be selected if Color Mode is set to sRGB g.) You can adjust the overall tint of the image. You can adjust tints in 10 stages from 5000 K to 10000 K.
List of Functions 71 Submenu Signal Menu Function Sync. Settable items vary depending on the image signal and source currently being projected. Setting details are saved for each image signal. You can adjust computer images when flickering, fuzziness, or interference appear in the images. Position You cannot make settings on the Signal menu when the source is USB Display, USB, or LAN.
List of Functions Submenu 72 Function Aspect You can set the aspect ratiog for projected images. s "Changing the Aspect Ratio" p.40 Overscan (This cannot be set when a digital RGB signal is input.) Changes the output image ratio (the range of the projected image). You can set the cropping range to Off, 4%, or 8%. When the source is HDMI, Auto is available. When Auto is selected, it automatically changes to Off or 8% according to the input signal.
List of Functions 73 Submenu Settings Menu Pointer Shape Function You can select the shape of the pointer. Pointer 1: Pointer 2: Pointer 3: s "Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse)" p.54 Submenu Keystone Control Panel Lock Power Consump‐ tion You can set the lamp brightness to one of two settings. Select ECO if the images being projected are too bright, such as when projecting images in a dark room or onto a small screen.
List of Functions Submenu 74 Function Test Pattern You can display a test pattern to adjust the projection without connecting other equipment when you set up the projector. While the test pattern is displayed, you can adjust keystone, zoom, and focus. To cancel the test pattern, press the [Esc] button on the remote control or the control panel. Reset You can reset all adjustment values on the Settings menu to their default settings, except for User Button.
List of Functions Submenu Operation Standby Mode 75 Function Direct Power On: Set to On to turn on the projector simply by plugging it in. When the power cable is plugged in, note that the projector turns on automatically in cases such as a power outage being restored. Sleep Mode: When set to On, this automatically stops projection when no image signal is being input and no operations are carried out.
List of Functions 76 Network Menu (EB-1775W/EB-1770W/EB-1760W Only) When Network Protect is set to On in Password Protect, a message is displayed and the network settings cannot be changed. Set Network Protect to Off and then configure the network. s "Setting Password Protect" p.62 Submenu Function Network Config‐ uration The following menus are available for setting Network items.
List of Functions 77 Yes: Saves the settings and exits the Network menu. No: Does not save the settings and exits the Network menu. Cancel: Continues displaying the Network menu. Soft keyboard operations The Network menu contains items that require input of alphanumerics during setup. In this case, the following software keyboard is displayed.
List of Functions 78 Basic menu Submenu Projector Key‐ word Submenu Function Projector Name Displays the projector name used to identify the projector when connected to a network. When editing, you can enter up to 16 single-byte alphanumeric characters. PJLink Password Set a password to use when you access the projector using compatible PJLink software. You can enter up to 32 single-byte alphanumeric characters.
List of Functions 79 Wireless LAN menu Submenu Submenu Wireless LAN Sys. Set the Wireless LAN system to either 802.11b/g or 802.11b/g/n. This is set to 802.11b/g by default. SSID Auto Set‐ ting Set to On to reduce the projector search time when connecting to a network using Quick from Connection Mode. Set to Off when connecting to multiple projectors at the same time. This is set to On by default. SSID Enter an SSIDg.
List of Functions 80 Security menu Only available when the supplied or optional Wireless LAN unit is installed. Submenu Security WEP Encryption Submenu Function Encryption Key 1/Encryption Key 2/Encryption Key 3/Encryption Key 4 You can enter the key used for WEP encryption. Enter the key in single-byte characters following instructions from the network administrator for the network in which the projector participates.
List of Functions • WPA This is an encryption standard that improves security which is a weak point of WEP. Although there are multiple kinds of WPA encryption methods, this projector uses TKIP and AES. WPA also includes user authentication functions. WPA authentication provides two methods: using an authentication server, or authenticating between a computer and an access point without using a server. This projector supports the latter method, without a server.
List of Functions 82 Mail menu When this is set, you receive an email notification if a problem or warning occurs in the projector. s "Using the Mail Notification Function to Report Problems" p.113 Submenu Function Address 1 Set‐ ting, Address 2 Setting, and Ad‐ dress 3 Setting You can input the email address of the destination to send the notification email to. You can register up to three destinations. You can enter up to 32 single-byte alphanumeric characters for the email addresses.
List of Functions Submenu 83 Function Trap IP Address 1/Trap IP Ad‐ dress 2 You can register up to two IP addresses for the SNMP trap notification destination. You can enter a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used. 127.x.x.x, 224.0.0.0 to 255.255.255.
List of Functions 84 Submenu Info Menu (Display Only) Function Video Signal Lets you check the status of the image signals being projected and the status of the projector. Items that can be displayed vary depending on the source currently being projected. Depending on the model used, some input sources are not supported. You can display the settings for Video Signal in the Signal menu.
List of Functions Submenu 85 Function Reset All You can reset all items in the Configuration menu to their default settings. The following items are not reset to their defaults: Input Signal, User's Logo, all items for Network menus*, Lamp Hours, Language, Password, User Button, and Multiscreen. Reset Lamp Hours Clears the cumulative lamp hours use time. Reset when you replace the lamp.
Troubleshooting This chapter explains how to identify problems and what to do if a problem is found.
Using the Help 87 If a problem occurs with the projector, the Help screen is displayed to assist you by pressing the Help button. You can solve problems by answering the questions. a c Confirm the selection. Using the remote control Using the control panel Press the [Help] button. The Help screen is displayed. Using the remote control Using the control panel Questions and solutions are displayed as shown on the screen below. Press the [Help] button to exit the Help. b Select a menu item.
Problem Solving 88 If you are having a problem with the projector, first check the projector's indicators and refer to "Reading the Indicators" below. See the following if the indicators do not show clearly what the problem might be. s "When the Indicators Provide No Help" p.91 Reading the Indicators The projector is provided with the following three indicators that indicate the operating status of the projector. A Power indicator Indicates the operating status.
Problem Solving 89 Refer to the following table to see what the indicators mean and how to remedy problems that they indicate. If all indicators are off, check that the power cable is connected correctly and that the power is being supplied normally. Sometimes, when the power cable is unplugged, the t indicator remains lit for a short period, but this is not a fault.
Problem Solving Status 90 Cause Remedy or Status If it is not cracked: Reinstall the lamp and turn on the power. If the error continues: Replace the lamp with a new one and then turn on the power. If the error continues: Stop using the projector, remove the power plug from the electrical outlet, and contact your local dealer or the nearest address provided in the Epson Projector Contact List.
Problem Solving 91 When the Indicators Provide No Help If any of the following problems occur and the indicators do not offer a solution, refer to the pages given for each problem. Problems Relating to Images sp.92 • No images appear Projection does not start, the projection area is completely black, or the projection area is completely blue. • Moving images are not displayed Moving images being projected from a computer appear black and nothing is projected. sp.93 • Projection stops automatically sp.
Problem Solving 92 Problems Relating to Images No images appear Check Remedy Did you press the [t] button? Press the [t] button to turn the power on. Are the indicators switched off? The power cable is not connected correctly or power is not being supplied. Connect the projector's power cable correctly. s "From Installation to Projection" p.26 Check that your electrical outlet or power source is functioning correctly.
Problem Solving 93 Moving images are not displayed (only the moving image portion turns black) Check Is the computer's image signal being output to the LCD and the monitor? (Only when projecting images from a laptop computer or a computer with a built-in LCD screen) Remedy Change the image signal from the computer to external output only. Check your computer's documentation, or contact the computer's manufacturer.
Problem Solving 94 Check Are the image signals being output to the projector? (Only when projecting images from a laptop computer or a computer with a built-in LCD screen) Remedy If the image signals are only being output to the computer's LCD monitor or to the accessory monitor, you need to change the output to an external destination as well as the computer's own monitor.
Problem Solving 95 Interference or distortion appear in images Check Remedy Is the image signal format setting correct? (Only when projecting images from a video source) Change the setting according to the signal for the connected equipment. s Signal - Video Signal p.71 Are the cables connected correctly? Check that all the cables required for projection are securely connected. s "Connecting Equipment" p.
Problem Solving 96 Check Remedy Is the computer set for dual display? (Only when projecting computer images) If dual display is activated in the Display Properties of the computer's Control Panel, only about half of the image on the computer screen is projected. To display the entire image on the computer screen, turn off the dual display setting.
Problem Solving 97 Images appear dark Check Remedy Is the image brightness set correctly? Adjust the Brightness and Power Consumption settings from the Configuration menu. s Image - Brightness p.70 s Settings - Power Consumption p.73 Is the contrastg adjusted correctly? Adjust the Contrast setting from the Configuration menu. s Image - Contrast p.70 Is it time to replace the lamp? When the lamp is nearly ready for replacement, the images become darker and the color quality becomes poorer.
Problem Solving 98 Other Problems No sound can be heard or the sound is faint Check Remedy Check that the audio/video cable is securely attached to both the projector and audio source. Disconnect the cable from the Audio port, and then reconnect the cable. Is the volume adjusted to the minimum setting? Adjust the volume so that sound can be heard. s Settings - Volume p.73 s "Adjusting the Volume" p.38 Is A/V Mute active? Press the [A/V Mute] button on the remote control to cancel A/V Mute.
Problem Solving 99 Check Remedy Are the batteries dead or have the batteries been inserted correctly? Make sure the batteries are inserted correctly or replace the batteries with new ones if necessary. s "Replacing the remote control batteries" p.17 Are the remote control ID and the projector ID matched? Make sure the ID for the projector you want to operate and the ID for the remote control match.
Maintenance This chapter provides information on maintenance procedures to ensure the best level of performance from the projector for a long time to come.
Cleaning You should clean the projector if it becomes dirty or if the quality of projected images starts to deteriorate. Attention 101 Attention Do not rub the lens with harsh materials or subject the lens to shocks, as it can easily become damaged. Turn off the projector's power before cleaning. Cleaning the Air Filter Cleaning the Projector's Surface Clean the projector's surface by wiping it gently with a soft cloth.
Cleaning a 102 • If a message is frequently displayed, even after cleaning, it is time to replace the air filter. Replace it with a new air filter. s "Replacing the Air Filter" p.106 • It is recommended that you clean these parts at least once every three months. Clean them more often than this if using the projector in a particularly dusty environment.
Replacing Consumables This section explains how to replace the lamp and the air filter. 103 • The lamp indicator flashes orange. Replacing the Lamp Lamp replacement period It is time to replace the lamp when: • The message "Replace the lamp." is displayed at the lower left of the projection screen when you start projecting. • The projected image gets darker or starts to deteriorate. The message is displayed for 30 seconds.
Replacing Consumables 104 How to replace the lamp The lamp can be replaced even when the projector is suspended from a ceiling. Warning • When replacing the lamp because it has stopped illuminating, there is a possibility that the lamp may be broken. If replacing the lamp of a projector which has been installed on the ceiling, you should always assume that the lamp is cracked, and you should stand to the side of the lamp cover, not underneath it. Remove the lamp cover gently.
Replacing Consumables d 105 e Install the new lamp. f Lower the lamp fixing spring, and press down on the left and right until it clicks into place. Insert the new lamp along the guide rails in the correct direction so that it fits, and push it firmly into place. Press down on the part marked PUSH to fix the lamp in place. Raise the handle and take out the old lamp. If the lamp is cracked, contact your local dealer or the nearest address provided in the Epson Projector Contact List.
Replacing Consumables g 106 Replace the lamp cover. Insert the hook as shown in the illustration below, and attach the cover. Tighten the lamp cover fixing screw. Replacing the Air Filter Air filter replacement period It is time to replace the air filter when: ① • There is a tear in the air filter. • The message is displayed even though the air filter has been cleaned. How to replace the air filter ② Attention • Make sure you install the lamp securely.
Replacing Consumables c Install the new air filter. Push in the air filter until it clicks into place. a Dispose of used air filters properly in accordance with your local regulations.
Appendix
Useful Software 109 EasyMP Network Projection (EB-1775W/EB-1770W/EB-1760W only) By using the supplied EasyMP Network Projection, you can project your computer screen from the projector via a network. Sharing the projector over the network allows you to project data from different computers without changing the signal cable. Even if the projector is away from the computer, you can still project data via a network. You can also output the computer's audio from the projector.
Optional Accessories and Consumables The following optional accessories and consumables are available. Please purchase these products as and when needed. The following list of optional accessories and consumables is current as of: August 2010. Details of accessories are subject to change without notice and availability may vary depending on the country of purchase.
Monitoring and Controlling (EB-1775W/EB-1770W/EB-1760W Only) Changing Settings Using a Web Browser (Web Control) By using the Web browser of a computer connected to the projector on a network, you can make settings and control the projector. This function allows you to perform setup and control operations remotely. In addition, since you can use the computer's keyboard, entering characters required for the setup is easier. Use Microsoft Internet Explorer 6.0 or later as the Web browser.
Monitoring and Controlling (EB-1775W/EB-1770W/EB-1760W Only) b c Click Web Remote. Name 112 Function E [A/V Mute] button Turns the video and audio on or off. s "Hiding the Image and Sound Temporarily (A/V Mute)" p.51 F [Page] buttons [Up] [Down] Changes pages in files such as PowerPoint files when using the following projection methods. • When using the Wireless Mouse function s "Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse)" p.
Monitoring and Controlling (EB-1775W/EB-1770W/EB-1760W Only) Using the Mail Notification Function to Report Problems When you set Mail Notification, notification messages are sent to the preset email addresses when a problem or warning occurs with a projector. This will enable the operator to be notified of problems with projectors even at locations away from the projectors. s Network - Mail - Mail Notification p.
Monitoring and Controlling (EB-1775W/EB-1770W/EB-1760W Only) ESC/VP21 Commands You can monitor and control the projector from a computer via USB. Connect the device and the projector with a USB cable, and then enter the communication commands (ESC/VP21 commands). When a command is input, the projector executes the command and returns a ":", and then accepts the next command. If the command being processed terminates abnormally, an error message is output and a ":" is returned.
Monitoring and Controlling (EB-1775W/EB-1770W/EB-1760W Only) • Stop-bit: 1 bit • Flow control: None 115
About Event ID (EB-1775W/EB-1770W/EB-1760W Only) 116 Check the numbers and then apply the following countermeasures. If you cannot resolve the problem, contact your network administrator, or contact your local dealer or the nearest address provided in the Epson Projector Contact List. s Epson Projector Contact List Event ID Cause Remedy 0432 0435 Failed to startup EasyMP Network Projection. Restart the projector. 0434 0482 0484 0485 Network communication is unstable.
About PJLink (EB-1775W/EB-1770W/EB-1760W Only) PJLink Class1 was established by the JBMIA (Japan Business Machine and Information System Industries Association) as a standard protocol for controlling network-compatible projector's as part of their efforts to standardize projector control protocols. The projector complies with the PJLink Class1 standard established by the JBMIA.
Screen Size and Projection Distance 118 Projection Distance (For EB-1775W/EB-1770W/ EB-1760W) A 4:3 Screen Size Minimum (Wide) to Maximum (Tele) B 40" 81x61 102 - 122 -6 50" 100x76 127 - 153 -7 60" 120x91 153 - 184 -8 80" 160x120 205 - 246 -11 100" 200x150 256 - 308 -14 150" 300x230 385 - 462 -21 200" 410x300 514 - 617 -28 250" 500x380 643 - 771 -35 260" 520x400 668 - 802 -36 Unit: cm A 16:9 Screen Size A Projection distance B Distance from the center of the lens t
Screen Size and Projection Distance 119 Unit: cm A 16:10 Screen Size Minimum (Wide) to Maximum (Tele) B 30" 64x40 67 - 80 -4 40" 86x54 89 - 108 -5 50" 110x67 112 - 135 -6 60" 130x81 135 - 162 -7 80" 170x110 181 - 217 -10 100" 220x130 226 - 271 -12 150" 320x200 340 - 408 -18 200" 430x270 454 - 545 -24 250" 540x340 567 - 681 -31 300" 640x400 681 - 818 -37 Projection Distance (For EB-1750) A Projection distance B Distance from the center of the lens to the base of
Screen Size and Projection Distance 120 A 4:3 Screen Size Minimum (Wide) to Maximum (Tele) B 60" 120x91 145 - 174 -10 80" 160x120 194 - 233 -14 100" 200x150 242 - 291 -17 150" 300x230 364 - 438 -26 200" 410x300 486 - 584 -34 250" 510x380 608 - 730 -43 300" 610x460 730 - 877 -51 Unit: cm A 16:9 Screen Size Minimum (Wide) to Maximum (Tele) B 30" 66x37 78 - 94 +1 40" 89x50 105 - 126 +1 50" 110x62 131 - 158 +1 60" 130x75 158 - 190 +1 70" 160x87 185 - 222 +1
Supported Monitor Displays 121 Component video Supported Resolutions Computer signals (analog RGB) Signal Refresh Rate (Hz) Resolution (dots) SDTV (480i) 60 720x480 Signal Refresh Rate (Hz) Resolution (dots) SDTV (576i) 50 720x576 VGA 60/72/75/85 640x480 SDTV (480p) 60 720x480 SVGA 56/60/72/75/85 800x600 SDTV (576p) 50 720x576 XGA 60/70/75/85 1024x768 HDTV (720p) 50/60 1280x720 WXGA 60 1280x768 HDTV (1080i) 50/60 1920x1080 60 1360x768 HDTV (1080p) 24/30/50/60 1920
Supported Monitor Displays 122 Signal Refresh Rate (Hz) Resolution (dots) UXGA 60 1600x1200 SDTV (480i/480p) 60 720x480 SDTV (576i/576p) 50 720x576 HDTV (720p) 50/60 1280x720 HDTV (1080i) 50/60 1920x1080 HDTV (1080p) 24/30/50/60 1920x1080
Specifications 123 Projector General Specifications EB-1775W Product name EB-1770W EB-1760W 292 (W) x 44 (H) x 210 (D) mm (not including raised section) Dimensions 0.59" Wide LCD panel size 0.55" Polysilicon TFT active matrix Display method 1,024,000 pixels WXGA (1280 (W)x 800 (H) dots)x 3 Resolution Focus adjustment Electric/Auto Manual (1 to 1.2) UHE lamp, 230 W Model No.: ELPLP65 Lamp 786,432 pixels XGA (1024 (W) x 768 (H) dots)x 3 Manual Zoom adjustment UHE lamp, 205 W Model No.
Specifications 124 Approx. 1.7 kg Mass EB-1775W Product name Con‐ nec‐ tors EB-1770W EB-1760W Computer port 1 Mini D-Sub15-pin (female) Video port 1 RCA pin jack Audio port 1 Stereo mini jack HDMI port 1 USB (TypeA) Port * 1 USB connector (Type A) USB (TypeB) Port * 1 USB connector (Type B) USB port (dedicated Wireless LAN unit) HDMI (Audio is only supported by PCM) EB-1750 - - 1 USB connector (Type A) * Supports USB 2.0.
Specifications 125 This product is also designed for IT power distribution system with phase-to-phase voltage 230V. Angle of tilt 30° 30° If you use the projector tilted at an angle of more than 30˚ it could be damaged and cause an accident.
Specifications 126 DECLARATION of CONFORMITY According to 47CFR, Part 2 and 15 Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers We: Located at: Tel: Epson America, Inc. 3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806 562-290-5254 Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device.
Appearance 127 292 3 28.6 50.4 107.5 Center of lens Distance from center of lens to suspension bracket fixing point 210 148 42 38 A B 100 52.
Glossary 128 This section briefly explains the difficult terms that are not explained in the text of this guide. For details, refer to other commercially available publications. AMX Device Discovery AMX Device Discovery is a technology developed by AMX to facilitate AMX control systems for easy operation of the target equipment. Epson have implemented this protocol technology, and have provided a setting to enable the protocol function (ON). See the AMX Web site for more details. URL http://www.amx.
Glossary 129 sRGB An international standard for color intervals that was formulated so that colors that are reproduced by video equipment can be handled easily by computer operating systems (OS) and the Internet. If the connected source has an sRGB mode, set both the projector and the connected signal source to sRGB. SSID SSID is identification data for connecting to another device on a wireless LAN. Wireless communication is possible between devices with matching SSID.
General Notes 130 All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein.
General Notes GNU GPL This projector product includes the open source software programs which apply the GNU General Public License Version 2 or later version ("GPL Programs"). We provide the source code of the GPL Programs until five (5) years after the discontinuation of same model of this projector product. If you desire to receive the source code of the GPL Programs, please see the "EPSON Projector Contact List" in the User's Guide, and contact the customer support of your region.
General Notes GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License.
General Notes c) 4. 5. 6. Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it.
General Notes Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10.
General Notes , 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License.
General Notes Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license. Most GNU software, including some libraries, is covered by the ordinary GNU General Public License.
General Notes a) b) The modified work must itself be a software library. You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.
General Notes 6. If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.
General Notes 9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License.
General Notes 16.
General Notes THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
General Notes The Unix configuration script "configure" was produced with GNU Autoconf. It is copyright by the Free Software Foundation but is freely distributable. The same holds for its supporting scripts (config.guess, config.sub, ltconfig, ltmain.sh). Another support script, install-sh, is copyright by M.I.T. but is also freely distributable. It appears that the arithmetic coding option of the JPEG spec is covered by patents owned by IBM, AT&T, and Mitsubishi.
General Notes libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc. For the purposes of this copyright and license, "Contributing Authors" is defined as the following set of individuals: Andreas Dilger Dave Martindale Guy Eric Schalnat Paul Schmidt Tim Wegner The PNG Reference Library is supplied "AS IS". The Contributing Authors and Group 42, Inc.
General Notes If you redistribute modified sources, we would appreciate that you include in the file ChangeLog history information documenting your changes. libmd5-rfc This projector product includes the open source software program "libmd5-rfc" which applies the terms and conditions provided by owner of the copyright to the "libmd5rfc". The "libmd5-rfc" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
General Notes 2. "You" (or "Your") shall mean an individual or Legal Entity exercising permissions granted by this License. "Source" form shall mean the preferred form for making modifications, including but not limited to software source code, documentation source, and configuration files.
General Notes 5. 6. 7. 8. You may add Your own copyright statement to Your modifications and may provide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies with the conditions stated in this License. Submission of Contributions.
Index 147 A A/V Mute ...................................................... 51 Abs. Color Temp. ........................................ 70 Air exhaust vent ........................................... 10 Air filter replacement period ................... 106 Aspect ...................................................... 40, 72 Auto H/V-Keystone .................................... 73 Auto Iris .................................................. 39, 70 Auto Setup ..............................................
Index 148 Projection ...................................................... 74 Projector ID ............................................ 57, 75 Projector keyword ....................................... 78 Projector Name ............................................ 78 Projector Setup ........................................... 111 Mouse pointer .............................................. 54 Multi-screen ........................................... 58, 75 N Network Configuration ........................
Index User's Logo ................................................... 60 User's Logo Protect ...................................... 62 V Video port ..................................................... 11 Video Signal ........................................... 71, 84 Volume .......................................................... 73 W Web Browser .............................................. 111 Web Control ............................................... 111 Web Control Password .....................
