User's Guide CMP0155-02 EN
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Copyrights and Trademarks Copyrights and Trademarks No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is designed only for use with this Epson printer.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Contents Contents Windows. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Mac. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Copyrights and Trademarks Introduction Changing the Network Connection Methods Notes on Manuals. . . . . . . . . . . . . . . . . . . . . . . . . . 6 Meaning of Symbols. . . . . . . . . . . . . . . . . . . . . . 6 Illustrations. . . . . . . . . . . . . . . . . . . . . .
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Contents Choosing a Print Size. . . . . . . . . . . . . . . . . . . Printing at Non-Standard Sizes. . . . . . . . . . . . . . Borderless Printing. . . . . . . . . . . . . . . . . . . . . . . Types of Borderless Printing Methods. . . . . . . Supported Paper. . . . . . . . . . . . . . . . . . . . . . . About Roll Paper Cutting. . . . . . . . . . . . . . . . Setting Procedures for Printing. . . . . . . . . . . .
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Contents Maintenance Where To Get Help Cleaning the Platen. . . . . . . . . . . . . . . . . . . . . . . 182 Handling of Used Consumables. . . . . . . . . . . . . . 183 Replacing Ink Cartridges. . . . . . . . . . . . . . . . . . . 183 Replacing Maintenance Box. . . . . . . . . . . . . . . . . 185 Replacing the Cutter. . . . . . . . . . . . . . . . . . . . . . 186 Technical Support Web Site. . . . . . . . . . . . . . . . .
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Introduction Manual Organization Introduction The manuals for the product are organized as shown below. Notes on Manuals You can view the PDF manuals using Adobe Acrobat Reader or Preview (Mac). Meaning of Symbols Warning: Caution: c Important: Note: U Setup Guide (booklet) Provides information on how to setup the printer after unpacking it from the box. Make sure you read this manual to perform operations safely.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Introduction C Click the title to open the relevant page. If the subtitles are not displayed when you play the video, click the subtitles icon shown in the image below. Click [+] to open the titles lower in the hierarchy. D If the reference is in blue text, click the blue text to open the relevant page. To return to the original page, do the following. For Windows While pressing the Alt key, press the .
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Introduction Printer Parts Front The illustration shows the SC-T3400 Series (24 inch model with stand). A Front cover Open the cover when cleaning inside of the printer or clearing jams. B Maintenance box cover Open the cover when replacing the Maintenance Box. U “Replacing Maintenance Box” on page 185 C Paper basket Output from the printer collects in this basket, keeping the media clean and free of creases.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Introduction F Control panel U “Control panel” on page 15 G Roll paper cover This cover protects the loaded roll paper and prevents dust from entering inside the printer. Except when loading or removing roll paper, it should be closed when using the printer. U “Loading Roll Paper” on page 33 H Alert lamp This lamp lights or flashes when an error occurs. Lights or flashes: An error occurred.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Introduction B Scanner's paper slot This paper slot is for feeding originals that you are copying or scanning. C Scanner cover Open this when there is a paper jam, or when you want to clean the scanner.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Introduction Inside A Spindle holder There is a holder on both the left and right sides. Place the both ends of the spindle. U “Loading Roll Paper” on page 33 B Paper slot The slot through which roll paper and cut sheets are fed during printing. C Print head Fires ink via high density nozzles while moving left and right to print. D Attachments Attach them to the spindle for loading a 3 inch core roll of plain paper.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Introduction G Guide When loading a cut sheet of paper, load the sheet while sliding its edge against the guide.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Introduction Side (right side) A USB port (for USB flash drive) You can insert USB flash drive for direct printing. U “Direct Printing of Files on USB Flash Memory” on page 99 B Vents Do not block the vents. U “Installation space” on page 20 C AC inlet Connect the supplied power cable here. D USB port Use when connecting to a computer using a USB cable. E OPTION port Connect a scanner to perform enlarged copying.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Introduction G Data light (yellow) The network connection status and data reception are indicated by a lit or flashing light. On: Connected. Flashing: Receiving data. H Status light (green, orange) The color indicates the network transmission speed.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Introduction Control panel Home screen operations A Home button Touch this button while a menu is displayed to return to the Home screen. The home button is off when it cannot be used during operations such as paper feeding. Overview of Home screen operations U Operator's Guide (booklet or PDF) A Information display area Displays the printer's status, error messages, and so on.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Introduction D Printer Status menu button Touch this button when you want to check the status of consumables or details of displayed notifications. U “Printer Status menu” on page 139 Wi-Fi Direct (simple AP) connection is enabled. H Consumables status icon Estimates of the remaining amounts of ink cartridges and the empty space in the Maintenance Box are indicated by the length of the bars.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series Introduction Note: ❏ Connecting a supported scanner to the printer displays a Enlarged Copy button on the screen (SC-T5400 Series/SC-T3400 Series/SC-T3400N Series only). Inserting USB flash drive into the printer displays a Memory Device button on the screen.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Introduction Posters and displays that are vivid and also allow for short-term outdoor display Features of Printer Realizing High Productivity High-speed printing Posters with vivid hues can be printed simply by selecting, for example, Poster (Photo)/Perspective in Select Target of the supplied printer driver. The speeds of the print head and paper feed have been increased for faster printing.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series Introduction Printer driver that is simple and easy to operate Print settings can be optimized simply by choosing the desired use or target. This spares you the trouble of adjusting print settings individually. When you select a Source setting, printing failures due to paper loading mistakes are reduced because the size and type of paper loaded in the printer are applied automatically.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Introduction Notes on Usage and Storage W SC-T3400N Series Installation space 1230 mm D 1288 mm H 735 mm Notes when using the printer Make sure that you secure the following space, clear of any other objects, so that paper ejection and consumable replacement are not obstructed. Note the following points when using this printer to avoid breakdowns, malfunctions, and print quality decline.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Introduction Notes when not using the printer Notes on handling ink cartridges If you are not using it, note the following points when storing the printer. If it is not stored correctly, you may not be able to print properly the next time it is used. Note the following points when handling ink cartridges to maintain good print quality. ❏ The ink cartridges packaged with your printer are partly used during initial setup.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Introduction ❏ To maintain the quality of the print head, this printer stops printing before ink cartridges are completely expended. ❏ Do not wet the paper. ❏ Do not throw away the paper packaging as you can use it for storing the paper. ❏ Although the ink cartridges may contain recycled materials, this does not affect printer function or performance.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Introduction Power Off Timer Note: Typically, print outs and photos fade over time (color distortion) due to the effects of light and various constituents in the air. This also applies to Epson special media. However, with the correct storage method, the degree of color distortion can be minimized. ❏ See the documentation supplied with Epson special media for detailed information on handling the paper after printing.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Introducing the Software Introducing the Software Provided Software The following table lists the provided software. The supplied software disc contains the software for Windows. When using a Mac or a computer without a disc drive, download the software from http://epson.sn and then install it. For details on the various software, see the online help of each software or the Administrator's Guide (online manual).
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Introducing the Software Software Name Function EpsonNet Config Software to configure the initial settings of the network or change the settings of the network in bulk when installing or relocating Epson printers and scanners. EpsonNet Config is not installed automatically. Download it from the Epson website and then install it if necessary. http://www.epson.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Introducing the Software How to Use Web Config Function Summary This section introduces the main functions of Web Config. See the Administrator's Guide for more details. This section describes how to start the software and provides a summary of its functions. How to Start Start the software from a web browser on a computer or smart device that is connected to the same network as the printer.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series Introducing the Software How to Use Epson Edge Dashboard How to Start Epson Edge Dashboard is a Web application that resides on your computer. Starting the computer will automatically start Epson Edge Dashboard and this remains running. A Display the screen as follows. Windows From the Taskbar on the Windows desktop, click the Epson Edge Dashboard icon, and select Show Epson Edge Dashboard.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Introducing the Software C Updating Software or Installing Additional Software Follow the on-screen instructions. c Important: Do not turn off the computer or printer during the update. When you install the software during setup as described in the Setup Guide, Epson Software Updater is installed.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Introducing the Software Uninstalling Software E Select the printer icon, and then click OK. F Follow the on-screen instructions to continue. Windows c Important: ❏ You must log in as an Administrator. ❏ If the password or confirmation of an administrator is requested, enter the password and then continue with the operation. When the delete confirmation message appears, click Yes.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Changing the Network Connection Methods E Changing the Network Connection Methods Connect your router and the printer with a LAN cable. See the following for the location of the printer's LAN port. U “Side (right side)” on page 13 Switching to Wireless LAN The printer can connect to a wired LAN or a wireless LAN.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Changing the Network Connection Methods G Touch Enter Password and enter the password. Note: ❏ Differentiate between uppercase and lowercase when entering the password. ❏ If the SSID was entered directly, set Password to Available before entering the password. H When input is finished, touch OK. I Check the settings and then touch Start Setup. J Touch OK to finish the procedure.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Loading and Setting the Paper Paper Load Position Loading and Setting the Paper Roll paper and cut sheets can be loaded. See the following for more details on the paper that can be used with the printer. U “Supported Media” on page 216 Notes on Loading the Paper Roll Paper Roll paper from 254 mm to the maximum printable width can be loaded. Caution: Do not rub the edges of the paper with your hands.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Loading and Setting the Paper Note: The paper slot for Roll Paper and Cut Sheet (1 sheet) is the same. Insert either one into the paper slot. A Check that "Load paper." is displayed on the Home screen and then open the cut sheet cover and the roll paper cover. B Remove the inserted spindle. Loading and Removing the Roll Paper Place the roll paper on the supplied spindle and then load the roll paper in the printer.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Loading and Setting the Paper C Pull off the transparent flange from the spindle. D Attach or remove the attachments in accordance with the roll core size of the roll paper. 3 inch roll core Attach the attachments to the both flanges. Align the triangle marks on the flange with those on the attachment, and push in until the tabs are secured. 2 inch roll core The attachments are not required.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Loading and Setting the Paper G J Attach the transparent flange and push it until there is no gap between the flange and roll paper. If there are gaps between the flanges at both ends and the roll paper, the paper may be fed skewed resulting in an error. H Check that the leading edge of the roll paper is not bent and then insert it into the paper slot until you hear a beep.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Loading and Setting the Paper If a barcode giving information on the paper is not printed on the roll paper Note: See the following. U “For Roll Paper” on page 42 M For SC-T5400 Series and SC-T3400 Series, check that the paper basket attached to the stand is open. Note: Close the paper basket before printing banners or other documents of sizes that will not fit in the paper basket.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Loading and Setting the Paper c Important: ❏ If commercially available synthetic or canvas paper is cut with the built-in cutter, the cutter may be damaged or its life may be shortened. When using such paper, cut the paper with scissors as described in the following procedure. ❏ Do not use a cutter. The printer may be damaged. A Touch the The paper is cut.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Loading and Setting the Paper We recommend that you return the paper to its original package and store it flat, and take it out of the package for use when printing.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series Loading and Setting the Paper D Detach the transparent flange from the spindle. E Remove the spindle from the roll paper. c Important: After rewinding the roll paper carefully, store it in the original package. F Attach the transparent flange to the spindle and return the spindle in the printer. G Close the roll paper cover and cut sheet cover.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Loading and Setting the Paper B Loading and Removing Cut Sheet (1 sheet) Load a sheet of paper with the print side facing up, align its right edge with the guide on the right, and move it downwards. Loading Cut Sheet (1 sheet) When roll paper is loaded, remove it. U “Removing Roll Paper” on page 38 Note: You can load the paper while viewing the loading procedure on the screen.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series Loading and Setting the Paper D If the paper is inserted straight, touch OK. To reload the paper, touch Cancel. If you have touched Cancel, load the paper again from step 2. E On the displayed screen, set the paper type and size that match the loaded paper. Not setting the appropriate paper type will cause print quality trouble. See the following for more details on the paper types and sizes.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Loading and Setting the Paper Setting Loaded Paper How to Set For Roll Paper A The currently set paper type is shown on the screen displayed after loading roll paper. Configure the following settings after loading roll paper. Paper Type settings This is the most important setting to obtain the optimum print results.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Loading and Setting the Paper C Select the paper type that matches the loaded roll paper. E Touch Paper Remaining. F Touch Setup. Epson Special Media Select the same product name as the one shown on the package of the paper. Commercially available non-Epson paper Select from the following commercially available paper types.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Loading and Setting the Paper B Settings of Paper Type This is the most important setting to obtain the optimum print results. Not setting a paper type that matches the loaded paper will cause wrinkles, scuffing, uneven colors, and other trouble. Touch Paper Type. The following paper type selection screen appears. Settings of Paper Size Paper size will not be automatically detected. Set the size of the loaded paper.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series Loading and Setting the Paper Select a category and select the target paper type. When a paper type is confirmed, the screen returns to the one in step 1. Note: If you scroll downward in the category selection screen, Custom Paper appears. To select custom paper that has already been registered, touch Custom Paper. D Touch Paper Size. If you will not change the paper size, touch OK. Select a category and select the target paper size.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Loading and Setting the Paper Optimizing Paper Settings (Media Adjust) Notes on Making Adjustments ❏ Correctly load the paper that actually requires adjustment and then select the paper type that matches the loaded paper. Media Adjust has three main types. ❏ If paper with visible curls, wrinkles, waves, folds, or bends is used, correct adjustment may not be possible.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Loading and Setting the Paper ❏ Cut sheet Paper Setting - Cut Sheet (1 sheet) - Media Adjust B The adjustment results are saved as settings of the currently selected paper type. Note: A print head nozzle clogging check is performed automatically before adjustment pattern printing. If nozzles are determined to be clogged, cleaning starts and the adjustment patterns will be printed after cleaning finishes.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series Loading and Setting the Paper Refer to the following when the error message Auto Adjustment is unable to start because there is a problem with the paper or printing status... appears, or when the adjustment results are not satisfactory.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer C Printing with the Printer Driver from Your Computer Select the printer in Printer and then click Printer Properties. The printer driver dialog will be displayed.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer If the desired size is not available in the pull-down menu of the Change Paper Size dialog box, click Custom Paper Size... and then set and save a custom size. For Roll Paper Width (Paper Size when cut sheet) and Media Type, the settings configured in the control panel of the printer are applied automatically.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer H Check that the Print Preview check box is selected and then click OK. Note: See the printer driver help for more details on setting items. You can display the help in the following two ways: If a preview is not necessary, clear the check box and then click OK. ❏ Click Help at the bottom right of the screen.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer B A Select the print data you want to cancel and click Cancel in the Document menu. To cancel all print data, click Cancel All Documents in the Printer menu. Open View devices and printers or Devices and Printers. Windows 10/8.1/8/7 Click in the following order: Hardware and Sound (or Hardware) > View devices and printers (or Devices and Printers).
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer Make the necessary settings. These settings become the default settings of the printer driver. Note: How to share Select Setting settings with multiple computers Select the settings you want to share, click Export..., and then export the settings to a file. Display the same screen of the printer driver on another computer, click Import..., and then import the settings.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer B D Select Edit Item. the display order and groups in List. C❏ Change You can move and order items by dragging and dropping. ❏ To add a new group (folder), click Add Group.... ❏ To delete a group (folder), click Delete Group. ❏ Drag and drop unnecessary items to Not Display.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer Basic Operating Procedures (Mac) Note: If page settings are not displayed in the print dialog, click the "page settings" option (e.g., Page Setup) in the File menu. Printing Procedure This section describes the basic procedure to print using the printer driver from a computer. Basic Printing Procedure A Turn on the printer, and load the paper.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer To enlarge or reduce the size, select from the pull-down menu below the Paper Size. To set the color correction method or color balance in detail to match your preferences, clear the Simple Settings check box. See the following for more details. U “Correct color and print” on page 74 G Check that the Print Preview check box is selected and then click Print.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer Canceling from a Computer Note: See the printer driver help for more details on setting items. Click in the printer driver settings dialog box to display Help. A Click the icon of this printer in the Dock. B Select the job you want to cancel, and then click Delete.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer B Click Save Current Settings as Preset in Presets. C Enter a name, and then click OK. B Note: When All printers is selected from Preset Available For, you can select the saved Presets from all printer drivers installed on your computer. The settings are saved to Presets. You can then select the settings you saved from Presets.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer Printing CAD Drawings A Open the data to be printed and then click Plot. B Select the printer in Printer/ plotter and then click Properties. C Click Custom Properties. There are the following two methods to print CAD drawings.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer F The printer driver's dialog box for this printer appears. D Set Output Size and Source in the printer driver. U “Basic Operating Procedures (Windows)” on page 49 U “Basic Operating Procedures (Mac)” on page 55 E Select CAD/Line Drawing - Black, CAD/Line Drawing - Color, or CAD/Line Drawing Bi-Level from the Select Target list.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer ❏ Specify Size You can specify the enlargement or reduction ratio. Use this method for a non-standard paper size. Enlargements and Horizontal and Vertical Banners The printer driver can enlarge or reduce documents for different paper sizes. There are three setting methods.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer If the size is different, select the correct size from the pull-down menu. Fitting Documents to the Width of the Roll Paper A U “Basic Operating Procedures (Mac)” on page 55 Check the document size (or paper size) setting on the Printer Settings tab of the printer driver.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer Fit Short Side to Roll Paper Width Fitting Documents to the Output Size Select this when you want to print with the print image enlarged to the maximum size for the loaded roll paper. A Check the document size (or paper size) setting on the Printer Settings tab of the printer driver.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer C If the size is different, select the correct size from the pull-down menu. U “Basic Operating Procedures (Mac)” on page 55 B Select the desired size from the Output Size pull-down menu. Windows Select Fit to Output Size on the Printer Settings tab of the printer driver. Windows Mac Mac D 64 Check other settings, and then start printing.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer U “Basic Operating Procedures (Mac)” on page 55 Choosing a Print Size A Check the document size (or paper size) setting on the Printer Settings tab of the printer driver. Note: In the case of an application without a page setup menu item, you can set the paper size if you open the Print dialog box from the Print menu item.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer C Select the size specification method from Width, Length, and Scale to and then enter the setting value. Printing at Non-Standard Sizes The print image is enlarged or reduced so that it becomes the specified width, length, or scale while maintaining the aspect ratio of the print data.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer Settings in Windows A Note: Display the Printer Settings tab of the printer driver from the application and then click Custom Paper Size.... ❏ To change the paper size you saved, select the paper size name from the list on the left. ❏ To delete a saved paper size, select the paper size name from the list on the left of the screen and then click Delete.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer C Settings in Mac A Open the page setup screen of the application and check that this printer is selected in Printer and then select Manage Custom Sizes from Paper Size. Enter values in Width and Height of the Paper Size, enter the margins, and then click OK.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer F When you have finished creating the data, display the Printer Settings tab of the printer driver from the Print dialog box. The registered paper size is displayed in Document Size on the Printer Settings tab. U “Basic Operating Procedures (Mac)” on page 55 G Check other settings, and then start printing.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer Borderless Printing You can print your data without margins on the paper. The types of borderless printing you can choose vary as shown below depending on the media type. ❏ Retain Size Create the print data larger than the paper size in the applications to produce borderless output. The printer driver does not enlarge the image data.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer About Roll Paper Cutting When performing borderless printing on roll paper, you can specify whether it is left and right borderless printing or all edges borderless printing, and how to cut the paper in the printer driver's Roll Paper Option. The cutting operation for each value is shown in the following chart.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer C Setting Procedures for Printing For Borderless settings, select from Auto Expand or Retain Size. Settings in Windows A Display the printer driver's Printer Settings tab and adjust the following settings. U “Basic Operating Procedures (Windows)” on page 49 If Auto Expand is selected, select the amount of enlargement from the following.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer E Check other settings, and then start printing. Standard : 3 mm for left and right Min : 1.5mm for left and right Settings in Mac A Open the Print screen and select the paper size from the Paper Size option, and then select a borderless printing method.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer If you clear the Simple Settings check box, you can check which of the above color correction methods is used. Standard of Select Target is the most suitable setting for the currently selected paper type.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer OS Color Management Settings Windows 10, Printer Manages Colors B Display the Printer Settings tab of the printer driver and then clear the Simple Settings check box in the Print Quality area. U “Basic Operating Procedures (Windows)” on page 49 Windows 8.1, Windows 8, Windows 7, Windows Vista C Select the print target.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer E If necessary, click Settings and then adjust items such as the Gamma, Brightness, Contrast, Saturation, and color balance. Settings example of Adobe Photoshop CC Open the Print dialog box. See the printer driver help for more details on each item. Select Color Management, then select Printer Manages Colors in Color Handling, and click Print.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer D G Select Printer Settings from the list and then clear the Simple Settings check box in the Print Quality area. If necessary, click Settings and then adjust items such as the Gamma, Brightness, Contrast, Saturation, and color balance. See the printer driver help for more details on each item. H E Select the print target.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer Color Management Printing Color Management Print Settings You can perform color management printing using this printer's printer driver in the following two ways. About Color Management Choose the best method according to the application you are using, the operating system environment, the aim of the print out, and so on.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer Setting profiles Setting color management with the applications Settings for the input profile, printer profile, and intent (matching method) vary between three types of color management printing since their color management engines are used differently. This is because color management usage differs between the engines.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer C Set color management to off. For Mac For Windows Select Printer Settings from the list and clear the Simple Settings check box in the Print Quality area, and select Off (No Color Adjustment) from the print target list.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer Settings example of Adobe Photoshop CC Setting color management with the printer driver Open the Print dialog box. Select Color Management, then select Printer Manages Colors in Color Handling, and click Print. Color Management Printing by Host ICM (Windows) Use image data in which an input profile has been embedded. Also, the application must support ICM.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer C Color Management Printing by ColorSync (Mac) Click Settings. Use image data in which an input profile has been embedded. Also, the application must support ColorSync. Note: Depending on the application, color management printing by ColorSync may not be supported. D Select Host ICM in ICM Mode. A Disable the color management functions in the application.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer Select Color Management, then select Printer Manages Colors in Color Handling, and click Print. Color Management Printing by Driver ICM (Windows Only) The printer driver uses its own printer profiles to perform color management. You can use the following two color correction methods.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer B C Click Settings. Select Driver ICM (Basic) or Driver ICM (Advanced) in ICM Mode of the ICM dialog box. D If you select Driver ICM (Advanced), you can specify the profile and intent for each of image data such as photos, graphics data, and text data. Intent Explanation Saturation Keeps the current saturation unchanged and converts the data.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer Settings in Windows Multi-Page Printing (N-up) A Two or four consecutive pages can be printed on a single sheet. Display the Layout tab of the printer driver and select the Page Layout check box. Then, select N-up and click the Settings button.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer Settings in Mac A Folded 2-Sided Printing (Windows only) Display the Print dialog box, select Layout from the list, and specify the number of pages per sheet and so on. Two consecutive pages can be printed on a single sheet. The second page is flipped 180˚ and printed adjacent to the first page, allowing the paper to be folded to make a 2-sided document.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer B Set Binding Edge and Binding Margin in the Folded Double-Side Setting dialog box. Poster Printing (Windows Only) A single page can be printed across multiple sheets. The sheets can then be joined together to form large posters (up to 16 times the original size).
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer B Set Number of panels in the Poster dialog box. Note: ❏ If Borderless Poster Print is grayed out, the selected paper or the size does not support borderless printing. U “Epson Special Media Table” on page 216 ❏ If Single Cut or Double Cut is selected for Auto Cut, the paper will be cut 1 or 2 mm inside the image, resulting in imperfect joins where the images meet.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer Joining poster sheets with printed borders If Overlapping Alignment Marks is selected, join guides (indicated by the lines drawn through and around the X marks in the illustration below) will be printed on each sheet. A Ready the two top sheets and trim the excess from the left sheet by cutting along the line joining the two join guides (the centers of the X marks).
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer C With the two sheets overlapping, trim the excess by cutting along the line joining the two cut guides (the lines to the left of the X marks). D Rejoin the two sheets. E Repeat steps 1 to 4 for the lower two sheets. Use an adhesive tape to stick the backs of the sheets together.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer H I With the two sheets overlapping, trim the excess by cutting along the line joining the two cut guides (the lines above the X marks). 91 Join the upper and lower sheets together. Use an adhesive tape to stick the backs of the sheets together.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer J After joining all the sheets, trim off the borders by cutting along the cut guides (outside the X marks). Printing Multiple Documents (Layout Manager) (Windows Only) Documents created in different applications can be printed together in your choice of layout. This allows you to improve print work efficiency and conserve paper.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer The overall size and placement of the objects can be changed using the Preferences and Arrangement options in the File menu. Setting Procedures for Printing A Open the file you want to print in your application.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing with the Printer Driver from Your Computer Saving and Recalling Settings The layout and setting information on the Layout Manager screen can be saved as a file. If you need to close your application in the middle of a job, you can save it to a file and then open it later to continue your work. Saving A Click the File menu on the Layout Manager screen, and then click Save As....
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing Using the HP-GL/2 or HP RTL Mode from a Computer Basic Print Settings Printing Using the HP-GL/2 or HP RTL Mode from a Computer A Touch Settings - General Settings - Printer Settings - Universal Print Settings from the Home screen. B Check Paper Source and change the setting if necessary. The default setting is Roll Paper.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing Using the HP-GL/2 or HP RTL Mode from a Computer ❏ SC-T3400 Series/SC-T3400N Series: HP Designjet 750C C3195A Note: When HP-GL/2 or HP RTL printing is not performed properly The printer automatically determines whether normal printing from the printer driver or emulation printing of HP-GL/2 or HP RTL from the sent print data and then switches the print mode accordingly.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing without Using the Printer Driver Direct Printing via the Web (Upload and Print) (SC-T5400M Series Only) Printing without Using the Printer Driver Function Summary This section explains how you can print, even if the printer driver is not installed on your computer, if you are connected to a network; it also explains how to connect a USB flash memory to the printer and print the files on the USB flash memory.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing without Using the Printer Driver Do the settings for the shared folder on the printer's screen or on Web Config. Note: If the Print tab does not appear, contact your system administrator. D U “Preparing a Shared Folder” on page 98 Do the settings for printing. The following files can be printed from a network folder/FTP. Select Color Mode and Paper Source in Basic Settings.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing without Using the Printer Driver Setup from Web Config A B Start Web Config. U “How to Start” on page 26 The Print tab appears. Click Basic. A On the Home screen, touch Network Folder. B Select 1 file to print. C Select Black/White or Color. After a short while, a list of the files in the shared folder appears. Using advanced settings such as enlarging or reducing size Proceed to step 4.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Printing without Using the Printer Driver E USB flash memories formatted in FAT and exFAT file systems can be used. However, you cannot use USB flash memories with security functions such as password protected ones. A Select Black/White or Color. Using advanced settings such as enlarging or reducing size Proceed to step 6. Connect the USB flash memory, in which the data to be printed is saved, to the printer.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Copy (SC-T5400M Series Only) ❏ Film Copy (SC-T5400M Series Only) ❏ Blueprint ❏ Actual printing stock ❏ Newspaper Placing Documents in the Scanner ❏ Flyer ❏ Drafting paper ❏ Japanese calligraphy paper You can load one document. The document sizes and paper types that can be loaded and the documents that cannot be loaded are as follows.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Copy (SC-T5400M Series Only) ❏ Originals that have become deteriorated ❏ Align the side of the document with line . ❏ Originals that are torn When loading documents that are thin, that are easily torn, or that you do not want to damage Use the optional carrier sheet for thin documents and documents that you do not want to damage.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Copy (SC-T5400M Series Only) If you are using the carrier sheet to scan, align the document guide with the position indicated in the illustration. B Load the document into the printer. C Touch Copy on the Home screen. D In Basic Settings, do the settings for Color, Quality, Density, and Reduce/Enlarge.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Scanning (SC-T5400M Series Only) ❏ Settings for the recipient email addresses and the contacts for the shared folder Do the settings from the printer's screen or from Web Config. This section explains the contacts settings in the shared folder from the printer's screen. See the Administrator's Guide for how to do settings in Web Config.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Scanning (SC-T5400M Series Only) ❏ Assign to Frequent Use: Register an address for frequent use. When an address is specified, it will appear on the top screen. Note: If you do not have a password set on your computer, you do not have to enter a user name or password. E Touch OK to finish registering a shared folder to your contacts.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Scanning (SC-T5400M Series Only) G You can search the recipients from your contacts. Enter search keywords into the search box at the top of the screen. Remove the original when scanning is complete. While holding the original, press the OK button on the screen, and then remove the original. ❏ Select from your history: Touch History, select a recipient, and then touch Close.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Scanning (SC-T5400M Series Only) Scanning and Saving an Image to a Memory Device A Connect a USB flash memory to the printer. B Load the original. U “Placing Documents in the Scanner” on page 101 U “How to Load Documents” on page 102 C Touch Scan on the Home screen. D Touch Memory Device. E In Basic Settings, select settings, such as Color Mode or File Format.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Making Enlarged Copies with an A3 or A4 Scanner (SC-T5400 Series/SC-T3400 Series/SC-T3400N Series Only) Supported Sizes Making Enlarged Copies with an A3 or A4 Scanner (SC-T5400 Series/ SC-T3400 Series/ SC-T3400N Series Only) Document Size*1 Output Size 5 × 7 inch A2 Letter US C (17x22in) A5 JIS B2 B5 US D (22x34in) A4 A1 B4 JIS B1*2 A3 US E (34x44in)*2 A0*2 User-Defined *3 *1 Differs depending on the specifi
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Making Enlarged Copies with an A3 or A4 Scanner (SC-T5400 Series/SC-T3400 Series/SC-T3400N Series Only) C Connect the scanner to the printer using the USB cable supplied with the scanner. Note: If Enlarged Copy is not displayed on the Home screen, check the following.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Making Enlarged Copies with an A3 or A4 Scanner (SC-T5400 Series/SC-T3400 Series/SC-T3400N Series Only) F Touch the numeric value for the number of copies and then enter the number of copies in the keypad screen. G Touch ❏ Use the ADF to scan multi-page documents. ❏ If multiple copies are set for scanning multiple sheets continuously, the copies will be printed on a page basis as shown below.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Using the Menu Menu List The items and options available in the menu are described below. See the reference pages for more details on each item. Paper Setting The Paper Setting menu is displayed if paper is loaded.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Settings value Remove Display the removal method Feed/Cut Paper Backward, Forward, Cut Media Adjust Easy Adjustment Start Paper Feed Adjust Auto Start Manual Start Print length adjustment Start Print Head Alignment Auto Start Manual Start Advanced Media Setting Platen Gap 1.2, 1.6, 2.1 (Displayed when in Paper Type, Custom Paper is selected.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Settings value Manage Remaining Amount Setup On, Off Remaining Amount 5.0 to 150.0 m Remaining Alert 1.0 to 15.0 m Change Paper Type Paper Type Plain paper Display supported paper types Coated Paper(Generic) Premium Glossy Sheet Others Paper Width A Series US-ANSI Display supported paper widths. (Displayed if Paper Size Check is set to Off.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Remove Settings value Eject paper Media Adjust Easy Adjustment Start Paper Feed Adjust Auto Start Manual Start Print Head Alignment Auto Start Manual Start Advanced Media Setting Platen Gap 1.2, 1.6, 2.1 (Displayed when in Paper Type, Custom Paper is selected.) Paper Suction -4 to +3 Paper Size Check On, Off (Displayed when in Paper Type, Custom Paper is selected.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Printer Status Details of each item U “Printer Status menu” on page 139 Settings item Settings value Supply Status Display approximate remaining amounts, as well as product number of consumables Message List Display list of messages communicating printer status Firmware Version Display firmware version Print Status Sheet Configuration Status Sheet Print Settings Items marked with an asterisk (*) are
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Settings value Normal Mode Button Press 0 to 10 Error Notice 0 to 10 Sound Type Pattern1, Pattern2 Sleep Timer 1 to 210 minutes (SC-T5400M Series only: 1 to 60 minutes) Power Off Timer Off, 30minutes, 1h, 2h, 4h, 8h, 12h Circuit Breaker Interlock Startup On, Off Date/Time Settings Date/Time Date: yyyy.mm.dd, mm.dd.yyyy, dd.mm.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Settings value Change Reference Paper Plain paper Display supported paper types Matte Paper Photo Paper CAD Others Advanced Media Setting Platen Gap 1.2, 1.6, 2.1 Top/Bottom Margins Standard, Top 3 mm/Bottom 3 mm, Top 15 mm/Bottom 15 mm, Top 35 mm/Bottom 15 mm Paper Suction -4 to +3 Back Tension Auto, Standard, High, Extra High Drying Time Drying Time per Pass 0.0 to 10.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Settings value Base Output Size Auto - A Series Display supported paper sizes US-ANSI US-ARCH B Series (ISO) B Series (JIS) Others User-Defined Display paper size input screen Resolution Standard, 300dpi, 600dpi, 1200dpi Color Mode (Common) EPSON Standard (sRGB), Business Graphics, GIS, Line Drawing, Off (No Color Management) HP-GL/2 Unique Settings Rotate 0˚, 90˚, 180˚, 270˚ Origin S
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Settings value Network Settings (Details of each item U “General Settings - Network Settings” on page 154) Wi-Fi Setup Router Connect via Wi-Fi Wi-Fi Setup Wizard When wireless LAN connection disabled: Display Connect via Wi-Fi menu When wireless LAN connection connected: Display connection status and settings information Push Button Setup(WPS) Others PIN Code Setup(WPS) Wi-Fi Auto Connect Disa
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Settings value Advanced Device Name Display settings change screen TCP/IP Proxy Server Email Server * Display General Settings - Scan Settings - Email Server Shared Folder * Display settings change screen IPv6 Address Enable, Disable Link Speed & Duplex Auto, 10BASE-T Half Duplex, 10BASE-T Full Duplex, 100BASE-TX Half Duplex, 100BASE-TX Full Duplex Redirect HTTP to HTTPS Enable, Disabl
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Settings value View Options Tile View, List View Search Options Begins with, Ends with, Includes Security Settings Restrictions * Access to Register/Delete Off, On Access to Recent of Scan to Email Off, On Access to Show Sent History of Scan to Email Off, On Access to Language Off, On Access to Thick Paper Off, On Protection of Personal Data Off, On Access Control * Off, On Admi
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Settings value Print Quality Adjustment Start Print Head Nozzle Check Start Head Cleaning Start Ink Cartridge(s) Replacement Display procedure Replace Maintenance Box Display procedure Replace Cutter Start Powerful Cleaning Start Discharging/Charging Ink Start Language Display supported languages Printer Status/Print (Details of each item U “Printer Status/Print” on page 161) Pr
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Memory Device Displayed when a USB flash memory is connected to the printer. JPEG files and TIFF files stored on the memory can be printed directly from the printer.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Settings value Copies 1 to 99 Color Mode Black/White, Color Quality Speed, Fine, Super Fine, Draft Density -4 to 4 Paper Source Roll Paper, Cut Sheet (1 sheet) Reduce/Enlarge Auto Fit Page On, Off Custom Size Actual Size, ISO A4->A0, ISO A3->A0, ISO A4->A1, ISO A2->A0, ISO A3->A1, ISO A1->A0, ISO A2->A1, ISO A0->A1, ISO A1->A2, ISO A0->A2, ISO A1->A3, ISO A0->A3, ISO A1->A4, ISO A0->
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Original Type Settings value Text & Image, Tracing Paper, Recycled, Blueprint, Blueprint Inverted, Watercolor Rendering Original Size Auto Detect - ISO A Display supported sizes for originals US-ANSI US-ARCH JIS B ISO B User-Defined Top Offset Display the Original Size Input screen 0.0 to 100.0 mm 0.00 to 3.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Destination Settings value Display the Location Selection screen Scan Settings Color Mode Black/White, Color File Format File Format JPEG, PDF, PDF/A, TIFF (Multi Page) Compression Ratio High Compression, Standard Compression, Low Compression PDF Settings Document Open Password Password Setting Off, On Password Enter password Permissions Password Password Setting Off, On Password Ent
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Settings value Image Quality Contrast -4 to 4 Sharpness -4 to 4 Remove Background -4 to 4 File Name Filename Prefix Enter the filename prefix Add Date On, Off Add Time On, Off Reset Yes, No Email 127
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Destination Settings value Display the Recipient Selection screen Scan Settings Color Mode Black/White, Color File Format File Format JPEG, PDF, PDF/A, TIFF (Multi Page) Compression Ratio High Compression, Standard Compression, Low Compression PDF Settings Document Open Password Password Setting Off, On Password Enter password Permissions Password Password Setting Off, On Password En
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item User-Defined Top Offset Settings value Display the Scan Size Input screen 0.0 to 100.0mm 0.00 to 3.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Settings value Basic Settings Color Mode Black/White, Color File Format File Format JPEG, PDF, PDF/A, TIFF (Multi Page) Compression Ratio High Compression, Standard Compression, Low Compression PDF Settings Document Open Password Password Setting Off, On Password Enter password Permissions Password Password Setting Off, On Password Enter password Printing Allowed, Not Allowed Edit
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Settings value Scan Size Auto Detect - ISO A Display supported scan sizes US-ANSI US-ARCH JIS B ISO B User-Defined Top Offset Display the Scan Size Input screen 0.0 to 100.0 mm 0.00 to 3.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Settings value Quality Speed, Fine, Super Fine Page Margins option Clip By Margins, Oversize, Borderless Bidirectional On, Off Color Mode EPSON Standard (sRGB), Business Graphics, GIS, Line Drawing, Off (No Color Management) Reduce/Enlarge Auto Fit Page On, Off Custom Size Actual Size, User-Defined 132
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Paper Setting menu Roll Paper menu ❏ The Paper Setting menu is displayed if paper is loaded. ❏ Media Adjust adjustment results, and settings in Advanced Media Setting and Manage Remaining Amount are stored for each paper type in Paper Type. Changing adjustments and settings will save these as the currently selected paper type settings even if the power is turned off.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Easy Adjustment Settings value Explanation Start Run this adjustment when there is a problem with print results, or after registering custom paper settings. Touch Start and the printer will run Paper Feed Adjust and Print Head Alignment automatically.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Top/Bottom Margins Settings value Explanation Standard * Setting this to Standard will set the top/bottom margins as follows depending on the printer driver print targets. Top 3 mm/Bottom 3 mm ❏ CAD/Line Drawing: 3 mm/3 mm ❏ Other: 30 mm/30 mm Top 15 mm/ Bottom 15 mm Top 35 mm/ Bottom 15 mm Left and right margins will remain at 3 mm regardless of settings.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Remove Skew Settings value Explanation On * Select whether to enable (On) or disable (Off) paper skew reduction. Off Manage Remaining Amount Setup On Off * Select whether to display/record (On) or not to display/ record (Off) the amount of remaining roll paper. Set On to enable Remaining Amount and Remaining Alert. U “For Roll Paper” on page 42 Remaining Amount 5.0 to 150.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Cut Sheet (1 sheet) menu The Paper Setting menu is displayed if paper is loaded. *Default setting Settings item Settings value Remove Explanation Touch to eject the loaded cut sheet (1 sheet) without printing. Touch to eject to the front.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Platen Gap Settings value Explanation 1.2 This is displayed when Custom Paper is selected in Paper Type. When registering Custom Paper, this is the Platen Gap (distance between print head and paper) for the paper selected in Change Reference Paper, so it does not normally need to be changed. Change this to a setting that will widen the gap (a higher value) if print results are smeared. 1.6 2.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Printer Status menu *Default setting Settings item Supply Status Settings value Explanation Display the approximate remaining amounts of each color in ink cartridge and its product number, and the approximate capacity in and product number of the Maintenance Box. The shorter a bar is, the lower the remaining amount of ink or space. is displayed, printing is possible until replacement is Even if instructed.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings menu General Settings General Settings - Basic Settings *Default setting Settings item Settings value Explanation LCD Brightness 1 to 9 (9*) Adjust screen brightness. On Setting this to On will mute the sound output when touching the menu or other items on the control panel screen, and the confirmation sound output when inserting paper into the paper slot when loading paper.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Settings value Explanation Date/Time - Enter the current date and time. Time Difference -12:45 to +13:45 (0.00*) Set the difference with coordinated universal time (UTC) in 15 minute increments. In network environments with a time difference, set this as necessary when administrating the printer. Language Japanese Select the language used on the control panel's screen.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series Using the Menu General Settings - Printer Settings *Default setting Settings item Settings value Explanation Paper Source Settings 142 User's Guide
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Settings value Explanation On Setting this to On will display an error message when the output size or paper type settings of print jobs sent to the printer differ from those settings in the printer.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Back Tension 2 Settings value Explanation 1 to 5 (2*) When one of the following settings is set, this setting is enabled.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Settings value Explanation Custom Paper Setting (Touching any of registry number 01 to 10 will display settings items.) Change Name Register and change the name of the custom paper settings. The name registered here is displayed in the Paper Type list. Touch this to display the keypad screen. Up to 20 characters may be input for the name.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Settings value Explanation Paper Suction -4 to +3 It is important to choose the appropriate amount of suction for the paper used in order to maintain the correct distance between the paper and print head.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item USB Settings value Explanation Auto * Normally, leave the setting as Auto. If HP-GL/2 or HP RTL print data is sent from a CAD application or plotter, this is automatically determined, and switched to HP-GL/2 mode. If HP-GL/2 mode printing is not carried out normally, or if normally printing in HP-GL/2 or HP RTL, set as HP-GL/2.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Settings value Explanation Roll Paper * Select the paper source. If the paper is not loaded as in the set paper source, then an error will occur during printing. Universal Print Settings Paper Source Cut Sheet (1 sheet) Quality Standard * Speed Select the print quality. Standard will print with the quality mode appropriate for the Paper Type setting for the paper selected in Paper Source.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Settings value Explanation Oversize The position at which the margin is added depends on the base output size setting, as shown below. ❏ When set to Auto in the Adds the value selected for page margin (area of following illustration) outside the hard clip area of the PS command in the following illustration).
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Page Margin Smoothing Settings value Explanation 3 mm * Select the top, bottom, left, and right margin values. 5 mm For a cut sheet, the top, bottom, left, and right margin values are 3 mm regardless of the settings. On Off * Base Output Size This setting is enabled when Resolution is set to Standard and there is no resolution specification in the sent print data.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Color Mode (Common) Settings value Explanation EPSON Standard (sRGB) Optimize the sRGB space and correct the color. Business Graphics * Perform color correction to sharpen your images based on the sRGB space. GIS Perform color correction suitable for when printing GIS (Geographic Information System) topographical maps or similar.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Line Merge Settings value Explanation On Select whether to merge the intersection of the overlapping lines within the image according to the MC command of the data (On), or move lines to be printed later to the front at intersections (Off). Off * Color Mode (HP-GL/ 2) Select Palette EPSON Standard (sRGB) Optimize the sRGB space and correct the color.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Settings value Explanation Pen Width 0.13 to 12.00 mm Pen Color 0 to 255 In Select Palette, selecting Palette B will print in accordance with the settings defined here. Settings details are the same as for Palette A.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu General Settings - Network Settings *Default setting Settings item Settings value Explanation Wi-Fi Setup Router (Connect via Wi-Fi) Disconnected or disabled This is displayed in gray. Touch this, and on the next screen touching Start Setup will display a Wi-Fi Setup Wizard menu, performing a connection operation. Connected Touch to display the connection status and settings information.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Settings value Wi-Fi Direct Explanation Disconnected or disabled This is displayed in gray. Touch this, and on the next screen touching Start Setup will display Start Setup. Touch Start Setup to enable Wi-Fi Direct, and display the SSID and password of the printer. Connected Touch to display the printer SSID and password, as well as the number of connected devices.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Settings value Device Name TCP/IP Proxy Server Explanation Set the name of the printer to use on the network. Auto * Automatically assign the printer IP address using DHCP functionality in the router. Manual Select this to manually assign a fixed IP address, then input the IP address, subnet mask, and other required information. For details, see the Administrator's Guide.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Settings value Explanation Confirm Recipient On Set to On to be able to check the recipients before scanning the original. Off * Email Server Server Settings Off Select this when not setting an email server. POP before SMTP Authenticates on the POP3 server (receiving mail server) before sending the email. When you select this item, set the POP3 server.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu General Settings - System Administration *Default setting Settings item Settings value Explanation Contacts Manager (SC-T5400M Series Only) Register/Delete Register or delete addresses that are used in Scan to Email and Scan to Network Folder/FTP. Frequent Email Register frequently used addresses for each item to be able to access them easily. You can also change the order of the addresses.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Protection of Personal Data Settings value Explanation Off * On Access Control (SC-T5400M Series Only) Off * On With Access Control, you can control the functions that users can use by linking the functions to the accounts registered to the users on the printer. If administrators want to restrict users, set this to On. User accounts must be created ahead of time.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item all Wi-Fi/network settings Settings value Explanation Yes Touch Yes to restore all Wi-Fi/network settings to the default settings. No Copy Settings Yes Touch Yes to restore Copy Settings to the default settings. No Scan Settings Yes Touch Yes to restore Scan Settings to the default settings.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Settings value Explanation Replace Maintenance Box Display procedure Select when replacing the Maintenance Box while confirming the procedure. If you are familiar with replacement and do not need to confirm the procedure, you can replace the Maintenance Box without selecting this menu item.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Enlarged Copy menu (SC-T5400 Series/SC-T3400 Series/SC-T3400N Series Only) Displayed when an Epson A3 or A4 scanner is connected to the printer. Set scaling in this menu to enable enlarged printing of the scanned documents.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Settings value Explanation Quality Speed Choose Copy Quality in view of image quality and print speed.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Memory Device menu Displayed when a USB flash memory is connected to the printer. JPEG files and TIFF files stored on the memory can be printed directly from the printer. U “Direct Printing of Files on USB Flash Memory” on page 99 Settings item Settings value Explanation Copies 1 to 99 Specify the number of copies. Paper Source Roll Paper * Select the paper source.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Settings value Explanation Oversize Add margins (areas of in the following illustration) outside the in the following illustration) set in the output size (areas of Reduce/Enlarge settings. With the actual output size, the margin in the sections become larger than the set output size (areas of following illustration). Borderless This is enabled when Roll Paper is selected in Paper Source.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Select Target (SC-T5400M Series Only) Settings value Explanation Poster(Photo)/Perspective Print posters and perspective drawings that use photos with their natural colors. Poster/Document * Print posters that combine letters and illustrations with vivid colors. GIS Print maps clearly. CAD/Line Drawing Print letters and fine lines clearly.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Copy menu (SC-T5400M Series Only) *Default setting Settings item Settings value Explanation Copies 1 to 99 Specify the number of copies. Color Mode Black/White Select whether to copy in color or black and white. Basic Settings Color * Quality Speed * Select the print quality. Fine Super Fine Draft Density -4 to 4 (0*) Choose the density for the copy results.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Page Margins option Settings value Explanation Clip By Margins * Add margins (areas of in the following illustration) inside the in the following illustration) set in the output size (areas of Reduce/Enlarge settings. When there is a print object in the margin section, it is clipped and not printed.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Original Type Settings value Explanation Text & Image * Select the type in accordance with the loaded original. Tracing Paper Recycled Blueprint Blueprint Inverted Watercolor Rendering Original Size Auto Detect - ISO A Display supported sizes for originals US-ANSI US-ARCH The default setting of Auto Detect is recommended in most situations.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Color Mode Clear All Settings Settings value Explanation EPSON Standard (sRGB) Optimize the sRGB space and correct the color. Business Graphics * Perform color correction to sharpen your images based on the sRGB space. GIS Perform color correction suitable for when printing GIS (Geographic Information System) topographical maps or similar.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Scan menu (SC-T5400M Series Only) *Default setting Settings item Settings value Explanation Network Folder/FTP 171
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Destination Settings value Explanation Display the Location Selection screen Specify the location for the scanned image. Black/White Select whether to scan in color or black and white. Specify the location from the recipients registered for frequent use or the recipients registered in your Contacts.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Settings value Explanation Auto Detect - ISO A Display supported scan sizes The default setting of Auto Detect is recommended in most situations. Note that, depending on the original, it may not be possible to detect the width correctly even when the setting is Auto Detect. Similarly, tracing paper and the optional carrier sheet are not detected automatically.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Clear All Settings Settings value Explanation Yes Touch Yes to restore all Scan Settings to the default settings. No Email Destination Display the Location Selection screen Specify the recipient of the scanned image. Black/White Select whether to scan in color or black and white.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Resolution Settings value Explanation 200dpi Select the resolution for scanning. 300dpi * 400dpi 600dpi Scan Size Auto Detect - ISO A Display supported scan sizes US-ANSI US-ARCH JIS B The default setting of Auto Detect is recommended in most situations. Note that, depending on the original, it may not be possible to detect the width correctly even when the setting is Auto Detect.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Settings value Explanation Subject Enter subject Use single-byte alphanumeric characters or symbols to enter the subject of the email. Attached File Max Size 1MB Select a maximum size for files that are attached to emails.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Settings value Explanation PDF Settings Document Open Password Password Setting Off * On Password Setting the file format to PDF allows you to set the security for the PDF. Set Document Open Password when you create a PDF that requires a password to be opened. To create a PDF file for which a password is needed to print or edit, set the Permissions Password.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Original Type Settings value Explanation Text & Image * Select the type in accordance with the loaded original. Tracing Paper Recycled Blueprint Blueprint Inverted Watercolor Rendering Advanced -4 to 4 (0*) Select the density for scanning. Negative values (-) are lighter and positive values (+) are darker. Contrast -4 to 4 (0*) Set the contrast.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Network Folder menu (SC-T5400M Series Only) *Default setting Settings item Settings value Explanation Roll Paper * Select the paper source. If the paper is not loaded as in the set paper source, then an error will occur during printing. Basic Settings Paper Source Cut Sheet (1 sheet) Color Mode Black/White Select whether to print in color or black and white.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Settings value Explanation Oversize Add margins (areas of in the following illustration) outside the in the following illustration) set in the output size (areas of Reduce/Enlarge settings. With the actual output size, the margin in the sections become larger than the set output size (areas of following illustration). Borderless This is enabled when Roll Paper is selected in Paper Source.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Using the Menu Settings item Settings value Explanation On Set to On to print so that the short edge of the original fits the width of the paper loaded in the printer. Reduce/Enlarge Auto Fit Page Off * If the short edge of the document is wider than the paper, printing will be at actual size. If the paper is not loaded as set in Paper Source of Basic Settings, this cannot be set to On.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Maintenance For stubborn dirt, clean it using a soft cloth that has been dampened with a small amount of neutral detergent and then thoroughly wrung out. Then, dry off the inside of the printer with a dry, soft cloth. Maintenance Cleaning the Platen Periodically (about once a month) clean the platen by doing the following procedure.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Maintenance Handling of Used Consumables c Important: Epson recommends the use of genuine Epson ink cartridges. Epson cannot guarantee the quality or reliability of non-genuine ink. The use of non-genuine ink may cause damage that is not covered by Epson's warranties, and under certain circumstances, may cause erratic printer behavior.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Maintenance F c Important: Do not touch the IC chip on the ink cartridge. You may not be able to print properly. D Close the cartridge cover. Hook a finger into the indentation on the top of the ink cartridge to be replaced and pull it straight toward you. c Important: We recommend that you remove and shake the installed ink cartridges once every three months to ensure good print quality.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Maintenance Replacing Maintenance Box A Open the Maintenance Box cover. B Pull out the Maintenance Box. C Place the used Maintenance Box in the clear bag included with the new Maintenance Box, and make sure that the zipper is closed tight. If The Maintenance Box is at the end of its service life. is displayed, replace the Maintenance Box. If The Maintenance Box is nearing the end of its service life.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Maintenance D Insert a new Maintenance Box. Replacing the Cutter Replace the cutter when it is not cutting paper cleanly. Supported cutter U “Options and Consumable Products” on page 214 Use a cross-head screwdriver to replace the cutter. Make sure you have a cross-head screwdriver with you before you start work. c Important: Caution: Do not touch the IC chip on the Maintenance Box.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Maintenance D Loosen the screw holding the cutter in place using a cross-head screwdriver and pull the cutter straight out. c Important: Screw the cutter firmly, otherwise the cut position may be slightly shifted or skewed. F Note: Place the used cutter in a plastic bag, then dispose of in accordance with regional ordinances, and as directed by local government. E Install the new cutter.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Problem Solver Problem Solver What to do When a Message is Displayed If the printer displays one of the messages shown below, refer to the solution listed and take the necessary steps. Messages What to do Cannot recognize ink cartridges. Try installing again. ❏ Remove and reinsert the ink cartridge. If the message persists, insert a new ink cartridge (do not reinstall the cartridge that caused the error).
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Problem Solver When a Maintenance Call/Printer Error Occurs Error messages What to do Maintenance Request A part used in the printer is nearing the end of its service life. Replace Parts Soon/End Of Parts Service Life XXXXXXXX Contact your dealer or Epson Support and tell them the maintenance request code. You cannot clear a maintenance error until the part is replaced.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Problem Solver Troubleshooting o Check the printer port. You cannot print (because the printer does not work) Click the Port tab in the printer Properties dialog and check the option selected for Print to the following port(s). The printer does not turn on.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Problem Solver o The printer has an error. When using a USB hub, is it being used correctly? o In the USB specification, daisy-chains of up to five USB hubs are possible. However, we recommend that you connect the printer to the first hub connected directly to the computer. Depending on the hub you are using, the operation of the printer may become unstable.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series Problem Solver Your problem is not listed here. o Decide whether the trouble is caused by the printer driver or the application. (Windows) Perform a test print from the printer driver so that you can check that the connection between the printer and computer is correct and the printer driver settings are correct. (1) Make sure that the printer is turned on and in ready status, and load A4 or larger paper.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Problem Solver The prints are not what you expected Main troubleshooting procedures If the following problems with print quality occur, then respond by following the process flow on this page.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Problem Solver o Check the print results and take one of the following measures ❏ If streaks (horizontal banding or uneven colors) appear in print results Check the print head nozzles for clogging U “When you want to unclog the print head” on page 196 The nozzles are not clogging / Clogging is resolved but streaks still appear in the print results Perform Paper Feed Adjust (Manual) U “Paper Feed Adjust (Manual) Procedure” on
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Problem Solver E Paper Feed Adjust (Manual) Procedure The adjustment patterns are printed twice. Visually check the adjustment patterns to make the adjustments. The following shows the length and number of sheets of paper used for adjustment pattern printing.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Problem Solver ❏ Roll paper: Approx. 285 mm If there is no difference between two adjacent patterns and you are unsure which is the best one to choose, enter the numeric value that comes between them. For example, if you are unsure whether to enter pattern 0 or 2, enter 1. ❏ Cut sheet: 1 sheet of A4 or larger A Touch the following in order from the Home screen.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series Problem Solver Example of clogged nozzles If the pattern has missing areas, touch to display the Head Cleaning screen. Proceed to the next step. D Touch Start to start cleaning. When cleaning is complete, Print the pattern? will be displayed. Touch Yes to return to Step 2. Repeat Steps 2 to 4, and check if the problem has been resolved.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Problem Solver Ink drips o Is the Color Density setting appropriate? If you feel that lines in drawings are too light, then on the printer driver Advanced screen, click Paper Configuration, and increase the ink density. Conversely, if the ink density is too high on tracing paper, either reduce the ink density or select Tracing Paper in the Paper Type settings of the printer, and then print.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Problem Solver The color is not exactly the same as another printer. o Lengths differ between the print results and print data If you want to print to roll paper with lengths exactly as specified in the print data, such as when printing CAD drawings, make the following adjustments. You will need a ruler so get one ready before performing this work.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Problem Solver o After Print Head Alignment, does the same problem occur? o Enable the Thick Paper function, and try printing. From the Home screen, touch Settings - Printer Settings - Thick Paper - On. In the printer driver Printer Settings screen, clear the Simple Settings check box in the Print Quality field. Select Level - Max Quality, clear the High Speed check box, and try printing.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Problem Solver The paper is creased. o Replace the pads for borderless printing. U “Replacing the pads for borderless printing” on page 202 Are you using the printer at normal room temperature? Epson special media should be used at normal room temperature (temperature: 15 to 25°C, humidity: 40 to 60%).
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Problem Solver D Use a soft cloth to remove any dust or dirt from the platen. F Remove paper particles and dust around the outer edges with commercially available cotton swabs. G After cleaning, close the front cover. Thoroughly wipe the area shown in blue in the illustration below. To avoid spreading the dirt, wipe from the inside to the outside.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Problem Solver D Center groove Use tweezers to pull out the pads for borderless printing that are located at the places where soiling occurs. F Bend a new pad for borderless printing as shown in the illustration. c Important: E Do not bend the new pads for borderless printing at other than the specified place. Use cleaning sticks to wipe off all ink that has accumulated at the following three places.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Problem Solver G I Insert the leg of the pad for borderless printing all the way into the hole. Gently press the pad for borderless printing until it is seated flatly in place. c Important: Make sure that no portion of the pads for borderless printing is higher than the surrounding surface.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Problem Solver o Is ink dry on the printed surface? Feeding or ejecting problems Depending on the printing density and media type, the ink may take a while to dry. Do not stack the paper until the printed surface is dry. Unable to feed or eject paper.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Problem Solver o Paper does not collect in the paper basket or is creased or folded Is the paper too thick or too thin? Check that the paper specifications are compatible with this printer. o U “Epson Special Media” on page 214 U “Supported Commercially Available Paper” on page 220 o Depending on the job and the work environment, paper may not collect in the paper basket. Take the following measures as appropriate.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Problem Solver C Close the roll paper cover and cut sheet cover. D When ejecting paper from the front, grasp the paper with both hands, and slowly pull it out towards you. G If Then turn the power off and on again. is displayed on the screen, turn off the printer, and then turn it back on. After removing the paper, reload the paper and restart printing.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Problem Solver C A Remove the jammed paper, then close the front cover. Open the scanner cover. c Important: Do not touch the print head. If you touch the print head with your hand, static electricity may cause a malfunction. D If Then turn the power off and on again. is displayed on the screen, turn off the printer, and then turn it back on. c Important: Do not lean against or place objects on the scanner cover.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Problem Solver Print head is automatically cleaned Others o The control panel display keeps turning off. o Is the printer in sleep mode? To ensure print quality, the printer may automatically perform head cleaning when the printer is turned on or before starting printing. The printer turned off due to a power cut Sleep mode is exited if a print job is received or the screen of the control panel is touched.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Problem Solver B c Important: ❏ Do not use volatile chemicals, such as alcohol or paint thinners. Deformation or discoloration could occur. Using a soft cloth, wipe off any dust, dirt, or paper particles (resembles white powder). Thoroughly wipe the area shown in blue in the illustration below. ❏ Do not apply liquids to or directly spray lubricant on the scanner.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Problem Solver D If you do not want to use the optional carrier sheet Use the cleaning kit, or the clean side of the soft cloth, to wipe the glass surface. If the original's loading position is correct, check the following items. If the original still cannot be fed properly, change Original Size or Scan Size to the standard size from Auto Detect. o Reload the original.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Problem Solver o C Is the original loaded with skew? Reload the original. If the original is loaded with skew, it cannot be fed properly. Adjustment values are determined as shown below. Scanned Image Is Misaligned o Example) When the length of the original is 50 cm and the print result is 50.1 cm: 50/50.1×100-100= -0.1996, rounded at the second decimal. Change the direction that the original is loaded.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series Problem Solver When the Scan Results Are Shifted Up in Relation to the Feed Direction of the Original Set the adjustment value toward the plus sign. When the Scan Results Are Shifted Down in Relation to the Feed Direction of the Original Set the adjustment value toward the minus sign. D Touch OK.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Appendix Appendix Options and Consumable Products The following options and consumable products are available for use with your printer. (As of July, 2018) For the latest information, see the Epson Web site. Epson Special Media U “Epson Special Media Table” on page 216 Ink Cartridges Epson recommends the use of genuine Epson ink cartridges. Epson cannot guarantee the quality or reliability of non-genuine ink.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Appendix Printer model SC-T5480 SC-T5480M Ink color Product Number 350 ml 110 ml Black T41K5 T41U5 Cyan T41K2 T41U2 Magenta T41K3 T41U3 Yellow T41K4 T41U4 SC-T3480N Others Product Part number Explanation Maintenance Box T6997 Replacement Maintenance Box for when there is insufficient empty space in the Maintenance Box.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Appendix Supported Media We recommend you use the following Epson special media for high-quality printing results. Refer to the following for supported commercially available paper. U “Supported Commercially Available Paper” on page 220 Epson Special Media Table Epson paper supported by this printer is described below. (As of August, 2019) The titles of the tables below have the following meanings.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Appendix Paper Name Size Borderless Doubleweight Matte Paper 594 mm/A1 610 mm/24 in. 728 mm/B1* ✓ Auto media adjust ✓ 914 mm/36 in.* Premium Glossy Photo Paper (170) 420 mm/A2 - 594 mm/A1 610 mm/24 in. 728 mm/B1* ✓ ✓ 914 mm/36 in.* Premium Semigloss Photo Paper (170) 420 mm/A2 - 594 mm/A1 610 mm/24 in. 728 mm/B1* ✓ ✓ 914 mm/36 in.* Enhanced Synthetic Paper 432 mm/17 in. 610 mm/24 in.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Appendix Paper Name Size* Photo Quality Inkjet Paper A4 Borderless Letter Auto media adjust - Legal A3 ✓* A3+ SuperB A2 ✓* US-C Archival Matte Paper ✓* A4 Letter - A3 A3+ SuperB Photo paper Glossy ✓ A2 - US C ✓ ✓ A4 Letter - A3 ✓ A3+ SuperB US-B Premium Glossy Photo Paper ✓ - A4 Letter 11 x 14 in.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Appendix Paper Name Size* Premium Semigloss Photo Paper A4 Borderless Letter Auto media adjust - A3 A3+ SuperB Premium Luster Photo Paper ✓ A2 - US-C ✓ ✓ A4 Letter - A3 ✓ A2 ✓* US-C 219
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Appendix Supported Commercially Available Paper This printer supports the following paper specifications for non-Epson media. c Important: ❏ Do not use paper that is wrinkled, scuffed, torn, or dirty. ❏ Commercially available paper corresponding to the paper types in the table can be loaded in and fed through the printer as long as they meet the following specifications, however Epson cannot guarantee the print quality.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Appendix 254 mm / 10 inches A1 / 594 mm 300 mm / 11.8 inches A1+ / ARCH D / 610 mm / 24 inches A3+ / 329 mm / 13 inches 700 mm / 27.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Appendix Before Printing on Commercially Available Paper When using commercially available paper, select the paper type setting that matches to the paper from the following settings. ❏ Plain paper ❏ Coated Paper (Generic) ❏ Photo Paper (Generic) ❏ Tracing Paper ❏ Tracing Paper ❏ Matte Film Refer to the following if there is banding, wrinkling, smearing, or uneven colors in the printing results.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Appendix Printable area Settings of Top/Bottom Margins Margin Values This section describes the printable areas for the printer. Standard A,C = 15 mm* B,D = 3 mm If the print range settings in application software are larger than the following printer printable areas, sections beyond the specified margins are not printed.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Appendix *4 c Important: ❏ Printing is distorted when the trailing edge of the roll paper comes off the core. Make sure the trailing edge does not come inside the printing area. ❏ If the print range settings width is smaller , then the than the print data width sections beyond the printable width will not be printed. Cut Sheet When printing borderless at the left and right, the left and right margins will be 0 mm.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Appendix SC-T3400 Series/SC-T3400N Series Moving or Transporting the Printer This section describes methods for moving and transporting the product. Notes for Moving or Transporting the Printer ❏ The printer is heavy, so ensure more than one person is used for these actions. When packing and moving the printer, make sure that it is carried by the following number of persons.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Appendix For models with stands, moving the printer on casters is possible providing there are no steps or unevenness in the floor along the route, however pay attention to the following points. When Transporting Before transporting the printer, contact your dealer or Epson Support.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Appendix System Requirements Software for this printer can be used in the following environments. (As of April, 2019) Supported OS and other elements may change. For the latest information, see the Epson Web site. Printer Driver Windows Operating system Windows 10/Windows 10 x64 Windows 8.1/Windows 8.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Appendix Web Config Web Config is software installed in the printer that will run in a web browser on a computer or smart device connected to the same network as the printer. U Administrator's Guide Windows Browser Internet Explorer 11, Microsoft Edge, Firefox*1, Chrome*1 Connection method with the printer*2 Ethernet or Wi-Fi *1 Use the latest version. *2 See the following for details on the network interfaces.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Appendix Epson Edge Dashboard c Important: Make sure the computer on which the Epson Edge Dashboard is installed meets the following requirements. If these requirements are not met, the software cannot monitor the printer correctly. ❏ Disable your computer's hibernate function. ❏ Disable the sleep function so that the computer does not enter sleep status. Windows Operating system Windows 10/Windows 10 x64 Windows 8.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Appendix Specifications Table Printer Specifications Humidity The (A) to (D) letters used in the table represent the printer models as shown below. (A): SC-T5400 Series (B): SC-T3400 Series (C): SC-T3400N Series (D): SC-T5400M Series Printing 20 to 80% (40 to 60% is recommended.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Appendix Printer's Scanner Specifications*1 Interface Specifications Scanner type Color Simplex Sheet-fed Scanner USB port for a computer SuperSpeed USB Sensor RGB color filter CIS 21600 pixels (600 dpi) (main scanning direction) Option port (USB port for a scanner) Hi-Speed USB Number of effective pixels Document size Max. 914.4 mm × 30480 mm*2 Ethernet*1 Standards IEEE802.3u (100BASE-TX) IEEE802.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Appendix For European users Warning: Radio Equipment Information To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing This product intentionally emit radio wave described as follows.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Where To Get Help Where To Get Help Contacting Epson Support Technical Support Web Site Before Contacting Epson If your Epson product is not operating properly and you cannot solve the problem using the troubleshooting information in your product documentation, contact Epson support services for assistance. If Epson support for your area is not listed below, contact the dealer where you purchased your product.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Where To Get Help Help for Users in North America Help for Users in Europe Epson provides the technical support services listed below. Check your Pan-European Warranty Document for information on how to contact Epson support. Internet Support Help for Users in Australia Visit Epson's support website at http://epson.com/ support and select your product for solutions to common problems.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Where To Get Help ❏ Sales inquiries and product information We encourage you to have all the relevant information on hand when you ring. The more information you prepare, the faster we can help solve the problem. This information includes your Epson product documentation, type of computer, operating system, application programs, and any information you feel is required.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Where To Get Help Bandung Lippo Center 8th floor Jl. Gatot Subroto No.2 Bandung Technical Support Hotline You can also contact our technical staff at the following telephone and fax numbers: Phone/Fax: (62) 22-7303766 Surabaya Hitech Mall lt IIB No. 12 Jl.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide Where To Get Help World Wide Web (http://www.epson.co.in) Information on product specifications, drivers for download, and products enquiry are available. Epson India Head Office - Bangalore Phone: 080-30515000 Fax: 30515005 Trunk Line: (63-2) 706 2609 Fax: (63-2) 706 2665 Helpdesk Direct Line: (63-2) 706 2625 E-mail: epchelpdesk@epc.epson.com.ph World Wide Web (http://www.epson.com.
