Manual

LCD screen message Condition/solution

Combination of IP There is a problem with the network connection to your product.

address and subnet

mask is invalid. See

your documentation.

Recovery mode An error has occurred during firmware updating. Connect your product using

a USB cable and try downloading the Firmware Update from Epson's support

website. If you still need help, contact Epson for support.

Note: The ink pads in the printer collect, distribute, and contain the ink that is not used on printed pages.

During the life of your product it may reach a condition where either satisfactory print quality cannot be

maintained or the ink pads have reached the end of their usable life. The Epson Status Monitor, your

LCD screen, or lights on the control panel will advise you when these parts need replacing. If this

happens during the standard warranty of the product, the exchange of the product or replacement of the

pads is covered under the standard warranty. If the product is out of warranty, the pads can be replaced

by any Epson authorized service provider. The waste ink pads are not a user-replaceable part.

Parent topic: Solving Problems

Related references

Paper Jam Problems Inside the Product

Paper Jam Problems in the Paper Cassette

Paper Jam Problems in the Auto Duplexer or Rear Cover

Where to Get Help

Related tasks

Placing Originals on the Scanner Glass