Manual

Caution: Never turn off the product during a cleaning cycle or you may damage it.

6. When the cleaning cycle is finished, you can check to see if the nozzles are clean; click Print Nozzle

Check Pattern and click Print.

7. Check the printed pattern to see if there are gaps in the lines.

Print head is clean

Print head needs cleaning

• If there are no gaps, click Finish.

• If there are gaps or the pattern is faint, click Clean to clean the print head again.

If you don’t see any improvement after cleaning the print head up to 2 times, turn off the product and wait

at least 6 hours. Then try cleaning the print head again. If quality still does not improve, one of the ink

cartridges may be old or damaged and needs to be replaced.

Parent topic: Print Head Cleaning

Related tasks

Loading Paper in Cassette 2 (Lower Cassette)

Checking the Nozzles Using a Computer Utility