Manual

6. Select Head Cleaning.

7. Press the Start button to clean the print head. You see a message on the LCD screen during the

cleaning cycle.

Caution: Never turn off the product during a cleaning cycle or you may damage it.

When the cleaning cycle is finished, you see a message on the display screen.

8. Select Print Nozzle Check Pattern, then press the Start button to run a nozzle check and

confirm that the print head is clean.

If you don’t see any improvement after cleaning the print head up to 2 times, turn off the product and wait

at least 6 hours. Then try cleaning the print head again. If quality still does not improve, one of the ink

cartridges may be old or damaged and needs to be replaced.

Parent topic: Print Head Cleaning

Related tasks

Loading Paper in Cassette 2 (Lower Cassette)

Checking the Nozzles Using the Product Control Panel