Installation Guide

44
E Use the adjustment knob on the left side to adjust the horizontal roll
1. Loosen the screw ( ) to unlock the adjustment knob.
2. Turn the orange knob ( ) to adjust the horizontal roll ( ).
3. After you finish making all of the adjustments in steps
E to J, tighten the screw you loosened in
.
F Use the adjustment knob on the right side to adjust the horizontal
rotation
1. Loosen the screws (x2) to unlock the adjustment knob( ).
Repeat steps
E to J as necessary. For each step, you may need to re-display the
test pattern as shown in step
B.
Screw
Screws (x2)