Installation Guide

10
2Specifications
Wall plate
The wall plate is in three pieces when shipped. Use the included M4 × 12 mm bolts (×6) to attach the separate
pieces together before mounting the projector. See page 31 for instructions.
Vertical slide adjustment range
Item Specification Additional information Reference
Page
Wall mount weight (including the
3-axis adjustment unit, slide plate,
wall plate, wall plate cover, wall
plate cover extender, and end cap)
Approx. 18.5 lb
(8.4 kg)
Wall mount: 6.6 lb (3.0 kg)
3-axis adjustment unit: 2.6 lb (1.2 kg)
Slide plate: 1.8 lb (0.8 kg)
Wall plate: 6.0 lb (2.7 kg)
Wall plate cover and end cap: 0.9 lb (0.4 kg)
Wall plate cover extender: 0.6 lb (0.3 kg)
—
Maximum load capacity 15.4 lb (7 kg) — —
Vertical slide adjustment range ± 1.5 in. (38 mm) — Refer to the
illustration
below
Horizontal slide adjustment range ± 1.8 in. (45 mm) — Refer to the
illustration on
page 11
Forward/backward slide
adjustment range
0 to 14.2 in.
(360 mm)
Arm slide adjustment range: 0 to 10.7 in. (273 mm)
Adjustment from 3-axis adjustment unit installation
position: 3.4 in. (87 mm)
Refer to the
illustration on
page 11
Horizontal roll adjustment range ± 3° Fine adjustments possible with adjustment knob
s p. 44
Horizontal rotation adjustment
range
± 8° Fine adjustments possible with adjustment knob
s p. 44
Vertical tilt adjustment range ± 3° Fine adjustments possible with adjustment knob
s p. 45
5.1 in.
(130 mm)
1.0 in.
(25 mm)
1.3 in.
(33 mm)
3.2 in.
(80 mm)
4.2 in.
(106.5 mm)
3.1 in. (79 mm)
2.4 in.
(60 mm)
4.6 in. (117 mm)
8.8 in. (223 mm)
6.3 in. (160 mm)
8.4 in. (213 mm)
19.5 in. (496 mm)
8.7 in. (222 mm)
9.7 in. (246 mm)
1.2 in.
(30.6 mm)
1.5 in. (38 mm)
1.5 in. (38 mm)