EPSON Date: TIB #: Reference: Product(s): Subject: PRODUCT SUPPORT BULLETIN 06/10/2009 Originator: DS PSB.2009.06.002 Authorization: TI 09-08j Rev. A Total Pages: 8 PowerLite 735c / 737c / 745c /755c/ 765c / 835p /1705/1715/1815/1825/7850p / 8300 with EasyMP.net option, Pro G5150/G5350 / 1725 / 1735W / 85 / 825 / 826W Release of EMP NS Connection for Windows & Mac Upgrade from v2.50 to v2.51 This bulletin was created to inform you of the release of the new version 2.51 of the EMP NS Connection software.
Also you can access troubleshooting by clicking Start Æ All programs Æ EPSON ProjectorÆEMP NS ConnectionÆEMP NS Connection V2.51 Troubleshooting. Page 2 of 8 PSB.2009.06.
Fixed error message displayed by the NVIDIA utility Failure Symptom When starting Quick Wireless/USB Display/NS Connection on a PC with the built-in NVIDIA graphics chip (ex.ThinkPadT61 NVIDIA Quadro NVS 140M/NVIDIA Quadro FX 570M Display Driver), the NVIDIA utility displays consecutive error messages. As a result, some PCs will experience a lock-up. Countermeasure Hardware acceleration level is set to 3 when Quick Wireless/USB Display/NS Connection are being used.
Limitation All Operating Systems • When using EAP type of security that consumes a lot of CPU resources, projectors may disconnect from NS connection. The solution is to click Set Options of NS Connection and set Adjust Performance to Fast. • It takes more time for the PowerLite 1725 / 1735W / 1825 / Pro G5150 / Pro G5350 projectors to disconnect from NS connection as compared to the PowerLite 1705 / 1715 / 1815 projectors, due to the limitation of the new OS (WindowsCE) on IM-X4 projectors.
Macintosh OS In case of uninstalling NSC V2.20 or later version, it is possible to uninstall by following 2 methods. - Delete by installer exclusively for NSC version which you want to uninstall. For example, when you want to uninstall NSC V2.40, you need to use installer for NSC V2.40. NSC V2.20 and later version can not be uninstalled automatically by different version installer. - Delete manually.
1.30 1.31 1.32 1.40 2003 May 31, 2004 June 18, 2004 January 18, 2004 April 1, 2005 2.00 2006/06/20 2.10 2006/12/08 2.20 2006/05/29 2.30 Nov. 27, 2007 2.40 Mar. 24, 2008 2.50 Jun.2,2008 2.51 Feb.
Supported by V2.30 Manufacturer Adapter Name Name D-Link Air Plus XTREMEG DWL-G650 NETGEAR WN511T BUFFALO Buffalo all products IBM ThinkPad products IBM ThinkPad products Logitec NETGEAR Logitec LAN-WAG/U2 Wireless LAN Adapter Wireless-G Notebook Adapter v.5.0 WG511AJP NETGEAR WGM511 NETGEAR WPNT511 Linksys WPC300N Linksys WPC54G Linksys WPC54GX4 Linksys WUSB54GP Linksys WUSBF54G NETGEAR WG511 v2 Linksys Page 7 of 8 PSB.2009.06.
Linksys WPC54GX Supported by V2.40 Linksys WUSB54GSC Supported by Quick Wireless Connection V.1.00 / NSC V2.50 Supported by Quick Wireless Connection v1.02 / NSCv2.51 Atheros Wireless-G Notebook Adapter With SRX Wireless Network Monitor v. 1.2 Compact Wireless-G USB Adapter Wireless Network Monitor v1.
EPSON Date: PSB #: Reference: Product(s): Subject: PRODUCT SUPPORT BULLETIN 04/20/2009 Originator: JAM PSB.2009.06.001 Authorization: TI 09-05e Rev. A/B Total Pages: 5 PowerLite 735c / Cinema 500 / 737c / 745c / 755c / 765c / 830p / 835p / 1705c / 1715c / 6100i / 6110i / 7800p / 7850p / 7900NL / 8300i / 8300i with EasyMP.
(2) Addition of Input Source (Only PowerLite 84 / 85 / 825 / 826W) Previous version of EMP Monitor included USB Display, USB and LAN as one source: EasyMP. The input source buttons for USB display, USB, and LAN are available as separate input sources as shown below: - Old version - EMP Monitor V4.22 EMP Monitor V4.22 - New version - EMP Monitor V4.30 EMP Monitor V4.30 . (3) New feature for the PowerLite 84 / 85 / 825 / 826W.
Limitations When the PowerLite1725 / 1735W exhibit a Lamp Cover Open error state, EMP Monitor cannot detect the error. The reason is that when the lamp cover is opened, the primary power source that reports the error state to EMP Monitor is turned off immediately. This is different from other models which make the secondary power source turn off under the same condition. Note: EMP Monitor Ver. 4.xx is not compatible with EMP Monitor Ver. 3.05 and earlier versions. EMP Monitor Ver. 4.
Software Upgrade History: Version Release date 3.00 December 25,2002 3.01 February 26,2003 3.02 April 18,2003 3.03 November 21,2003 3.04 April 1, 2004 4.01 October 18, 2004 4.02 August 29, 2005 4.10 4.22 May 8, 2006 May 15, 2007 September 26, 2007 March 31, 2008 4.30 April 3, 2009 4.20 4.21 Remarks Supported PowerLite 735c Supported PowerLite 7800p / 8300i Supported PowerLite 7850p / 8300i with EasyMP.
EPSON Date: PSB #: Reference: Product(s): Subject: PRODUCT SUPPORT BULLETIN 12/18/2008 Originator: DS PSB.2009.01.006 Authorization: TI 08-22e Rev. A/B Total Pages: 7 PowerLite 735c / 737c / 745c / 755c / 765c / 835p 1705c / 1715c / 1815p / 1825p / 7850p / 8300i with EasyMP.net option Pro G5150 / Pro G5350 / 1725 / 1735W Release of Check Tool for Network Projectors V1.00 (for Windows) This bulletin was created to inform you about the release of Epson Check Tool software for Network Projectors version 1.
Notes 4. Checks wireless LAN switching • Checks whether wireless LAN adapter is turned ON. • Checks whether EMP Quick Wireless Connection and EMP NS Connection’s Quick Connection mode can set the SSID on the user’s PC when trying to connect to a projector using EMP Quick Wireless Connection and EMP NS Connection’s Quick Connection Mode. The Check Tool checks for communication conflict and whether it can actually stop the utilities when both utilities--EMP Quick Wireless Connection V1.
Notes Output of the log file: • The Check Tool records the result in a text file (log file). Usually, the log file is saved under the name of CheckInfoDATE.log in the directory where “EB_CHT.exe” is stored Limitations • When the Check Tool is checking the user’s PC, the user’s PC drops off network. • The Check Tool does not check whether the firewall of manufacturers of security software other than Windows may be blocking EPSON Quick Wireless Connection/EMP NS Connection.
3) Location of download file: Check Tool for Network Projector V1.00 Download epson12794.exe from the Epson website (www.epson.com). This is a self-extracting file; please follow the screen prompts to install the Check Tool software. 4) Double-click the [EB_CHT.exe] icon 5) Read the contents of the [SOFTWARE LICENSE AGREEMENT], and click the [Agree] button. 6) A dialog indicating the program is starting opens with the following message: This tool cuts off the network connection temporarily.
7) The Check tool dialog is displayed. It takes a few minutes for the results of the verification are displayed 8) When two or more wireless LAN adapters are available on your computer, the adapter selection dialog opens. Select the wireless LAN adapter and press the OK button to continue. Page 5 of 7 PSB.2009.01.
9) When the verification is complete, the result is displayed on the bottom of the dialog. The result is stored in the same folder as the check tool. File Name: CheckInfo<****>.log **** indicates the created date and time. [Exhibit 1] Wireless LAN client list that NSC and Quick Wireless Connection stop their service process Manufacturer Name D-Link Supported by NSC V2.
Linksys WPC300N Linksys WPC54G Manufacturer Name Linksys Adapter Name Linksys WUSB54GP Linksys WUSBF54G NETGEAR WG511 v2 Linksys WPC54GX Supported by Linksys NSC V2.40 Supported by Atheros NSC V2.50 & Quick Wireless Connection V1.00 WPC54GX4 WUSB54GSC Wireless-N Notebook Adapter Wireless Network Monitor v1.05 Wireless-G Notebook Adapter Wireless Network Monitor Ver 3.1 Wireless LAN Utility Name Wireless-G Notebook Adapter with SRX400 Setup Wizard V1.
EPSON Date: PSB #: Reference: Product(s): Subject: PRODUCT SUPPORT BULLETIN 09/17/2008 Originator: VS PSB.2009.01.003 Authorization: TI 08-29e Rev. A Total Pages: 8 PowerLite 1735W, 735c, 737c, 745c, 755c, 765c, 835p, 1705c, 1715c, 1725, 1815c, 1825, 7850p, 7950p, 8300i with EasyMP.Net optional module, Pro G5150 and Pro G5350 projectors EMP SlideMaker2 updated Version 1.
1) Selecting Aspect Ratio for the Projector being used: a) Properties Window b) Drag and Drop Window 2 of 8 PSB.2009.01.
2) How to Verify the Aspect Ratio of the Scenario: The resolution of the scenario is displayed in the window title of the Scenario Window and Scenario Preview as shown below: a) Scenario Window b) Scenario Preview 3 of 8 PSB.2009.01.
3) Location of download file: EMP SlideMaker2 updated Version 1.30 Download epson12812.exe from the Epson website (www.epson.com) This is a self extracting file, please follow screen prompts. After “Clicking” on the “Setup.exe” file, your will be prompted to: 4 of 8 PSB.2009.01.
Select you language. 5 of 8 PSB.2009.01.
Click “Next” at this screen. 6 of 8 PSB.2009.01.
Click “Finish” to complete the installation. 7 of 8 PSB.2009.01.
4) How to User the software: Please refer to the original documentation that came with your Projector.
EPSON Date: PSB #: Reference: Product(s): Subject: PRODUCT SUPPORT BULLETIN 11/13/2007 PSB.2007.11.005A TI 07-63e, Rev. A Epson EMP Monitor EMP Monitor Version 4.21 Release Originator: AP Authorization: Total Pages: 3 This bulletin was created to inform you of the release of Epson EMP Monitor version 4.21 utility.
PowerLite 735c PowerLite 737c PowerLite 745c PowerLite 755c PowerLite 765c PowerLite 830p PowerLite 835p PowerLite 1705c PowerLite 1715c PowerLite 6100i PowerLite 7800p PowerLite 7850p PowerLite 7900NL PowerLite 8300i / 8300NL PowerLite 8300i with the EasyMP.
Software History: Version 3.00 3.01 3.02 Release Date December 25, 2002 February 26, 2003 April 18, 2003 3.03 3.04 November 21, 2003 April 1, 2004 4.01 October 18, 2004 4.02 August 29, 2005 4.10 May 8, 2006 4.20 4.21 May 29, 2007 September 26, 2007 Notes Added support for the PowerLite 735c Added support for the PowerLite 7800p / 8300i Added support for the PowerLite 7850p / PowerLite 8300i with the EasyMP.
EPSON Date: PSB #: Reference: Product(s): Subject: PRODUCT SUPPORT BULLETIN 06/06/2005 Originator: JD PSB.2005.06.001 Authorization: N/A Total Pages: 3 Powerlite 8300/8300 with EasyMP.net/9300 series Projectors Filter-Cleaning Procedures This bulletin was created to inform users about the filter-cleaning procedures necessary for maintaining proper airflow and reducing the potential for overheating.
2) Air intake filters (2)--located at bottom of projector: Use a computer vacuum to clean both filters. If you don’t have one, then use a soft brush and gently clean the filters. If the dirt is difficult to remove or either filter is damaged or broken, replace the filter(s). Note: Both filters should be replaced when the lamp is replaced. 3) Power supply intake filter (located on side of projector—opposite handle side) Use a computer vacuum to clean dust from the filter and vents. Page 2 of 3 PSB.2005.
4) Lamp intake filter (circular filter located at bottom of projector) Use a computer vacuum to clean dust from the filter and vents. Page 3 of 3 PSB.2005.06.
EPSON Date: PSB #: Reference: Product(s): Subject: PRODUCT SUPPORT BULLETIN 05/11/2005 PSB.2005.05.005 N/A PowerLite 8300i 1400 x 1050 DVI Compatibility Support Originator: JAM Authorization: Total Pages: 2 Reason: This bulletin is to inform you of the testing results for 1400 x 1050 DVI full-screen resolution with the Epson PowerLite 8300i Projector. Question: 1. Has the Epson PowerLite 8300 projector been tested for 1400 x 1050 DVI full-screen display compatibility? 2.
Projector Resolution “About” information: Source: DVI Input Signal: Digital-RGB Resolution 1280 x 1024 Refresh Rate: 60 Hz Input Device: PowerMac G5 Source: Input Signal: Resolution Refresh Rate: Computer 1 Analog-RGB 1400 x 1050 60 Hz Input Device: Extron VTG 400 Tested by: J.A.Madrigal Epson America Inc., Advanced Product Support Long Beach, CA Page 2 of 2 PSB.2005.05.
EPSON Date: PSB #: Reference: Product(s): Subject: PRODUCT SUPPORT BULLETIN 05/11/2005 PSB.2005.05.003 N/A PowerLite 8300i and PowerLite 9300i 1400 x 1050 Compatibility Support Originator: JAM Authorization: Total Pages: 2 Reason: This bulletin is to inform you of the testing results for 1400 x 1050 full-screen resolution with the Epson PowerLite 8300i and PowerLite 9300i video projectors. Question: 1.
Video Test Generators tested: Make: Extron Model #: VTG 400 Projector Resolution “About” information: Source: DVI Input Signal: Digital-RGB Resolution 1400 x 1050 Refresh Rate: 60 Hz Input Device: PowerMac G5 Source: Input Signal: Resolution Refresh Rate: Computer 1 Analog-RGB 1400 x 1050 60 Hz Input Device: Extron VTG 400 Tested by: J.A.Madrigal Epson America Inc., Advanced Product Support Long Beach, CA Page 2 of 2 PSB.2005.05.
EPSON Date: PSB #: Reference: Product(s): Subject: PRODUCT SUPPORT BULLETIN 10/08/2004 Originator: DS PSB.2004.10.002 Authorization: TI 04-46e Rev. A Total Pages: 14 EMP NS Connection, EMP Network Manager, EMP Monitor, EMP Multi Screen Adjustment, Cinema Color Editor, VCOM Driver Evaluation results of Epson Projector PC applications tested in Windows XP with SP2.
Executing the Software: When executing the software noted below for the first time after SP2 installation completes, the following security alert messages are displayed: [EMP NS Connection] Security alert screen (EMP NS Connection) [EMP Network Manager] Security alert screen (EMP Network Manager) Page 2 of 14 PSB.2004.10.
[EMP Monitor] Security alert screen (EMP Monitor) [EMP Multi Screen Adjustment] Security alert screen (EMP Multi Screen Adjustment) The Security Alert screen for EMP Multi Screen Adjustment is shown after clicking the Auto button of Network or clicking the Add button after entering an IP address in the IP Address box. Page 3 of 14 PSB.2004.10.
[Cinema Color Editor] Security alert screen (Cinema Color Editor) The functions of the three buttons displayed in the security alert screen are explained below. [Keep Blocking] --- Enables you to register a started application in the “Exceptions” program of the Windows Firewall. The network port that the application uses is blocked. By selecting this button once, this security alert message will not be shown when starting the application next time.
Operating Status Report When selecting the Keep Blocking button, the security alert message is closed and the main screen of each application is displayed. [EMP NS Connection Application] Port 3620 is necessary for searching for projectors. If this port is blocked, projectors are not detected. The other applications operate normally. However, there is a case that execution of automatic search disables automatic detection.
[Caution] In case the check box for Don’t allow exceptions is checked (this box is not checked at the initial setting), a network port for software is not unblocked even though the software is checked on Exceptions. Make sure this option is not selected. Windows Firewall screen Page 6 of 14 PSB.2004.10.
c.) Select the Exceptions tab and display exceptions program. [Caution] If this check box is not checked, the security alert screen is not displayed when starting software. •Exceptions screen d.) Check the check boxes for the software you don’t want to block. Page 7 of 14 PSB.2004.10.
[EMP NS Connection] • Check EasyMP Software box Unblock screen (EMP NS Connection) Page 8 of 14 PSB.2004.10.
[EMP Network Manager Application]• Check EPSON Projector box Unblock screen (EMP Network Manager) Page 9 of 14 PSB.2004.10.
[EMP Monitor Application]→ Check EasyMP.net Software box Unblock screen (EMP Monitor) Page 10 of 14 PSB.2004.10.
[EMP Multi Screen Adjustment Application]→ Check EPSON Projector Software for Multi Screen box Unblock screen (EMP Multi Screen Adjustment) Page 11 of 14 PSB.2004.10.
[Cinema Color Editor Application] ---> Check Cinema Color Editor. Unblock screen (Cinema Color Editor) By following the above procedure, the network port that each application uses is unblocked and they can operate normally. Page 12 of 14 PSB.2004.10.
Corresponding program name to PC applications PC Application Program name EMP NS Connection EasyMP Software EMP Network Manager EPSON Projector EMP Monitor EasyMP.net Software EMP Multi Screen Adjustment EPSON Projector Software for Multi Screen Cinema Color Editor Cinema Color Editor When selecting the Unblock button: The Security Alert screen is closed and the main screen is displayed. Then the search result is displayed.
VCOM Driver The following message is shown after the VCOM driver is installed on your PC. Select “No, not this time” item and continue the Plug&Play of the device. 8.) Notes: When you add the program to Exceptions list, the program can receive network communication from outside. This may cause a security risk such as exposure to a virus attack. Page 14 of 14 PSB.2004.10.
EPSON Date: PSB #: Reference: Product(s): Subject: PRODUCT SUPPORT BULLETIN 04/19/2004 Originator: TC PSB.2004.04.005 Authorization: N/A Total Pages: 1 PowerLite 735c/7850p & 8300i (with EasyMP.net module.) EMP NS Connection failures caused by Remote Control applications This bulletin was created to inform you of an issue that can occur when using the PowerLite 735c/7850p, 8300i (with EasyMP.net module) and remote control software.
EPSON Date: PSB #: Reference: Product(s): Subject: PRODUCT SUPPORT BULLETIN 02/26/2004 Originator: AP PSB.2004.02.009 Authorization: TI03-57e Rev. A Total Pages: 1 PowerLite 735c / 7800p / 7850p / 8300i / Cinema 500 EMP Monitor version 3.03 Update This bulletin was created to inform you of the availability of EMP Monitor version 3.03. This version of the EMP Monitor software has added support for the PowerLite Cinema 500 projector. All other support for previously supported projectors remains the same.
EPSON Date: PSB #: Reference: Product(s): Subject: PRODUCT SUPPORT BULLETIN October 17, 2003 Originator: VS PSB.2003.11.001 Authorization: TI 03-42e Rev. A Total Pages: 3 PowerLite 735c / 7850p / 8300i with EasyMP.net option installed Supported Wired and Wireless LAN cards Reason: This bulletin is to inform you of the testing results for wired and wireless LAN cards used with the PowerLite 735c / 7850p / 8300i with EasyMP.net option installed.
Evaluation results for the Wireless LAN cards: Wireless LAN card PowerLite 735c PowerLite 7850p 3Com,3crshpw 196, office connect Cisco Aironet350 AIR-PCM341(2.4GHz) FMV Notebook (Broadcom BCM4306) FMV Notebook (Intersil Prism2.5) Fujitsu FMV-JW181(Agere) Fujitsu FMV-JW183(Agere HermesII) Fujitsu FMV-W182(Intersil Prism2.5) Fujitsu FMV-JW182(Intersil Prism2.5) FMV-STYLISTICTB93(Intersil Prism2.
Wired Card name PowerLite 735c 3Com 3C589C-TP 3Com 3CXE589ET-JP D-Link DFE670TXD Fujitsu FMV-J182 Hawking PN652TX Linksys PCM100 ver2 Netgear FA411 SMC SMC8041TX 3Com 10/100 LAN PC Card 3CCFE574BT PCET100-CL Linksys 10/100 PC Card SMC 8041TX V.
EPSON Date: PSB #: Reference: Product(s): Subject: PRODUCT SUPPORT BULLETIN 07/16/2003 Originator: TC PSB.2003.07.001 Authorization: N/A Total Pages: 1 PowerLite – 735c / 7850p / 8300i (with Easy-MP.Net option installed) Epson Wireless Projectors and using dual mode 802.11b/g or 802.11b/a wireless PC Cards This bulletin was created to inform you of issues that have been reported when accessing Epson Wireless Projectors using dual mode 802.11b/g or 802.