® EPSON Stylus COLOR 1160 Printer Basics Printed on recycled paper with at least 10% post-consumer content.
Copyright Notice All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. The information contained herein is designed only for use with this EPSON printer. EPSON is not responsible for any use of this information as applied to other printers.
Contents WELCOME! About Your Software About Your Documentation Warnings, Cautions, Notes, and Tips Windows System Requirements Macintosh System Requirements ENERGY STAR Compliance Year 2000 Ready Important Safety Instructions Ink Cartridge Safety Instructions VIEWING YOUR ELECTRONIC PRINTER MANUAL Accessing Your Electronic Printer Manual Navigating Your Electronic Printer Manual PRINTING FROM START TO FINISH Using the EPSON Guided Printing Exercise Printing with Windows Loading Paper Opening the Printer S
Printing with PhotoEnhance Using Custom Project Types Using Advanced Settings Using Special Papers EPSON Photo Quality Ink Jet Paper Matte Paper - Heavyweight EPSON Photo Paper Envelopes Selecting the Correct Media Type 23 26 28 31 31 31 31 34 35 MAINTAINING YOUR PRINTER 37 37 38 39 40 41 42 44 46 47 48 Cleaning the Print Head Using the Head Cleaning Utility Using the Control Panel to Clean the Print Head Examining the Nozzle Check Pattern Replacing an Ink Cartridge Removing and Installing Ink Cartridge
PROBLEM SOLVING Diagnosing Printer Problems Checking the Control Panel Lights Running a Printer Check Identifying Printer Parts Problems and Solutions Problems Setting Up the Printer or Installing Software Problems with Printing Problems Getting Good Print Quality Problems with Paper Feeding Solving Miscellaneous Printout Problems Uninstalling Printer Software Reinstalling Printer Software Where To Get Help EPSON Technical Support 49 49 49 51 52 53 53 54 55 58 59 60 60 61 61 INDEX 63 v
Welcome! Your EPSON Stylus® COLOR 1160 printer is the ideal output device for business graphics. You can print anything from reports and resumes to photos and back light film with great results. The printer comes with these features: ■ Resolutions up to 1440 by 720 dpi (dots per inch), even on plain paper ■ Fast print speeds of approximately 9.
About Your Software The printer software CD-ROM includes all the software you need for printing: ■ Your printer driver runs your printer and lets you control how your documents look. You can’t use your printer without it. ■ The EPSON® Guided Printing Exercise, a quick step-by-step guide to changing your printer software settings. ■ Your electronic Reference Guide gives you complete information about your printer.
Warnings, Cautions, Notes, and Tips Please follow these guidelines: Warnings must be followed carefully to avoid bodily injury. Cautions must be observed to avoid damage to your equipment. Notes contain important information about your printer. Tips contain additional hints for better printing. Windows System Requirements To use your printer and its software, your system should have: ■ An IBM® compatible PC with at least a 486/66 MHz (for Windows 98) or 486/25 MHz (for Windows 95 or Windows NT® 4.
■ Double-speed (2x) CD-ROM drive (quad-speed [4x] or faster recommended) for installing the printer software ■ For parallel connection: a high-speed, bidirectional, IEEE-1284 compliant parallel cable (6 to 10 feet long); the cable must have a D-SUB, 25-pin, male connector for your computer and a 36-pin, Centronics® compatible connector for the printer For USB connection: a computer running Windows 98 with a Windows 98 compliant USB port and a shielded USB “AB” cable from Series A (computer) to Series B (
■ At least 16MB of available RAM (32MB recommended) ■ At least 50MB of free hard disk space (100MB recommended) ■ VGA, Super VGA, or better display adapter and monitor ■ Double-speed (2x) CD-ROM drive (quad-speed [4x] or faster recommended) for installing the printer software ■ A shielded USB “AB” cable from Series A (computer) to Series B (printer), up to 6.5 ft. (2 meters) long. Using an improperly shielded USB cable—especially a cable more than 6.5 ft.
Important Safety Instructions Before using your printer, read the following safety instructions to make sure you use the printer safely and effectively: ■ Be sure to follow all warnings and instructions marked on the printer. ■ Turn off and unplug the printer before cleaning. Clean with a damp cloth only. Do not spill liquid on the printer. Always turn the printer off using the Ppower button. Don’t switch off the power strip, or unplug the printer until the Ppower light is off.
■ Unplug the printer and refer servicing to qualified service personnel under the following conditions: If the power cord or plug is damaged; if liquid has entered the printer; if the printer has been dropped or the case damaged; if the printer does not operate normally or exhibits a distinct change in performance. Adjust only those controls that are covered by the operating instructions. Ink Cartridge Safety Instructions ■ Install the ink cartridge immediately after you remove it from its foil package.
8
Viewing Your Electronic Printer Manual Your printer software CD-ROM includes an electronic Reference Guide for your printer. The manual is in HTML format, so you need a browser—such as Internet Explorer 3.0 or later or Netscape Navigator 3.0 or later—to view it. If you are using a different browser, the pages may not display correctly. (A browser is not included on the printer software CD-ROM.
If you copied the manual to your hard drive, you can access it at any time, as follows: Windows: Select Start, Programs, EPSON, and double-click ESC1160 Guide. Macintosh: Open the EPSON Stylus COLOR 1160 folder and double-click View Reference Guide. Navigating Your Electronic Printer Manual When you first open the Reference Guide, you see this screen: Click here to expand the table of contents Click a topic on the left to expand the table of contents.
After expanding the table of contents, you can click on the topic you want to view. If there’s a right arrow Click the down arrow , click it to view subtopics, then click on a topic to go to it. to close a subtopic list.
12
Printing from Start to Finish Here’s what to do to print a basic document—such as a memo, newsletter, or photograph—from loading the paper to selecting print settings to controlling the print job. Follow the instructions in these sections: ■ “Printing with Windows” on page 14 ■ “Printing on a Macintosh” on page 19 You can even practice selecting settings using the EPSON Guided Printing Exercise, as described below.
If you didn’t install the Guided Printing Exercise when you set up your printer, follow these steps to install it: 1. Insert the printer software CD-ROM. 2. Windows: Double-click My Computer, double-click your CD-ROM drive icon, then double-click the Epsetup icon. You see the EPSON Installation Program menu. Double-click EPSON Guided Printing Exercise and follow the on-screen instructions to install it.
Keep the following in mind when loading paper: ■ Load the printable side face up. It’s usually whiter or brighter than the other side. ■ Load letterhead or preprinted paper into the printer top edge first. ■ Don’t load paper above the arrow on the left edge guide. If you’re printing on envelopes or other special paper sizes or types, see page 31 for loading instructions.
If you click the print icon on your application’s tool bar instead of selecting Print from the File menu, you may not get the option to change the printer software settings before printing. Selecting Printer Software Settings Once you click Properties, you see your printer software Properties dialog box. The most important thing to remember is to set the correct Media Type for the paper you’re using. The Media Type setting affects the other options you can choose.
■ Set the Mode option to Automatic. This lets the printer software determine the best settings for your print job. It’s the easiest way to get good printing results on all types of paper. ■ Set the slider in the Mode box to Quality or Speed. This lets you choose between a higher resolution or faster printing (or an in-between setting) for the paper you’re using. (The slider is not available when certain media types are selected.
Controlling Printing Once you’ve clicked OK, you return to the Print dialog box. Click OK to start printing Click OK (or Print, depending on your application) to start printing. After a moment, the Progress Meter appears and shows the progress of your print job. You can use the buttons to cancel, pause, or restart printing. You can also see how much ink you have left and view printing tips.
Printing on a Macintosh This section describes these basic steps for printing on a Macintosh: ■ loading paper ■ opening the printer software ■ selecting printer software settings ■ controlling printing (To print with Windows, see page 14.) Loading Paper Load paper only up to this arrow Make sure your printer and computer are turned on. Slide paper against the right edge guide Place your paper against the right edge guide and slide the left edge guide against the paper.
Opening the Printer Software After you open your application program and create your document, you’re ready to select your page setup and other printer software settings. From the File menu, click Page Setup.
Selecting Printer Software Settings Now open the File menu and click Print. You see the main printer settings dialog box for your application (your dialog box may look slightly different): Select the type of paper you loaded Select the Ink color Select Automatic mode Select faster or higher-quality printing, or in-between The most important thing to remember is to set the correct Media Type for the paper you’re using. The Media Type setting affects the other options you can choose.
Controlling Printing Once you’ve clicked Print, your printer begins printing. If you turned on background printing, you can select EPSON Monitor3 from the Application menu at the right side of the menu bar to check the progress of your print job. You see the EPSON Monitor3 dialog box: Click to restart your print job Click to pause printing Click to cancel printing Click on the current print job or a waiting print job . . .
Printing with PhotoEnhance The printer driver includes PhotoEnhance options that increase image brightness and contrast to improve the appearance of low-resolution photos. You can also add special effects, such as Soft Focus. If you’re printing high-resolution images, you may want to use the Automatic setting instead; see page 16 (Windows) or page 21 (Macintosh). PhotoEnhance does not affect your original image; it only affects your printout.
You see one of these dialog boxes: Click PhotoEnhance Windows Macintosh 4. Choose the Media Type you want to print on. (If you’re not sure which setting to select, see page 35.) 5. Choose Color ink. (You cannot select PhotoEnhance if Black ink is selected.) 6. Click PhotoEnhance. 7. If your photograph was taken with a digital camera, you can click the Digital Camera Correction box. This gives your printed images the appearance of photographs taken with a film camera.
8. For more fine-tuning, click Standard. You see a list of specialized settings for photographs. Select the setting that most closely matches your photograph (People or Nature) or select one of the special filters (Soft Focus or Sepia). You may need to experiment with these settings to get the exact look you want, especially if you have multiple images on a page. You can also make detailed settings on the Advanced dialog box to fit your individual needs, as described on page 28. 9.
Using Custom Project Types Your EPSON Stylus COLOR 1160 printer software includes custom project types with preset options for printing specific types of documents—such as reports, graphs, or drafts. These options let you quickly select the best settings for your particular type of document and paper, or select a color-matching method for your project. Follow these steps to print with custom project types: 1. Create your image or document in your application software. 2.
Always choose your Media Type and Ink settings before you select a custom project type Macintosh Click Custom, then click here to select a project type 7. Choose a project type following these guidelines (these settings are restricted by your Media Type and Ink settings): ■ Text/Graph: For printing graphics-intensive documents like presentations with charts and graphs. ■ Economy: For printing rough drafts of text on plain paper. Saves ink.
9. If you need to reduce or enlarge the image (proportional printing), print multiple pages on a single sheet, “tile” an image to make a large poster, or add a watermark, do the following: Windows: Click the Layout tab. Macintosh: Click the Layout button. (You can often make these settings in your application software. If so, you should make the changes there.) 10. Windows: Click OK to return to your application’s Print dialog box. Then click OK (or Print, depending on your application) to start printing.
5. Click Custom, and then click the Advanced button. You see the Advanced dialog box: Click here to change your Print Quality (resolution) This section changes depending on the Color Management setting selected above Windows Click here to change your Print Quality (resolution) This section changes depending on the Color Management setting selected above Macintosh 6. Check the displayed Media Type and Ink settings you selected on the main dialog box.
8. Select a color management method (the availability depends on your operating system). 9. Select any other settings you need to change. Many of the settings are automatically selected by other settings you choose. For details on all the printer software settings, see your electronic Reference Guide or online help. After you customize your print settings, you can save them as a group. Then you can reuse them whenever you print a similar project. Click Save Settings in the Advanced dialog box.
Using Special Papers How can you get the best-looking photos, most vivid colors, and sharpest text? Always use EPSON’s special ink jet papers. To show you how much difference EPSON paper can make, we’ve included some free samples. Check out the EPSON Photo Quality Media Pack that came with your printer. Instructions for printing on the samples, along with other papers, are given in the following sections. For a list of EPSON special ink jet papers and ordering information, see the inside back cover.
■ Select Photo Paper as the Media Type setting. ■ To keep your printouts looking their best, store them in a resealable plastic bag or other airtight covering and protect them from heat, humidity, and direct sunlight. Return unused paper to the original package as soon as you finish printing. If you’re using letter-size or A4-size Photo Paper, follow the instructions on page 14 to load and print on the paper. If you’re using 4 × 6-inch, Panoramic, or roll Photo Paper, see the next sections.
Panoramic Photo Paper 1. Pull up the paper support extension. Load one sheet of Panoramic paper glossy side up. Hold up the paper’s top edge and press the E load/eject button to feed it into the printer. Support the paper as it feeds into the printer Support the paper as it ejects from the printer so it doesn’t fall onto the floor 2. Choose Photo Paper as the Media Type setting and Panoramic 210 × 594 mm as the Paper Size setting. Photo Paper on a Roll (13 in x 32.
Envelopes You can load up to 10 envelopes at a time, flap edge first and printable side up. Place them against the right edge guide and slide the left edge guide against them. (You’ll get better results if you press each envelope flat before loading it, or load one envelope at a time.) Set the thickness lever to the + position when you print on envelopes or other thick media. (Return the lever to the 0 position before you print on regular paper.
Selecting the Correct Media Type Your printer automatically adjusts itself for the type of paper you select in your printer software. That’s why the Media Type setting is so important. It tells your printer what kind of paper you’re using and adjusts the ink coverage accordingly. Before you print, always check your Media Type setting. Here are the settings you should choose for your paper: For this paper . . . Select this Media Type setting . . .
36
Maintaining Your Printer This section describes maintenance procedures to keep your printer working at its best and preparation steps for moving your printer. Follow the instructions here for: ■ cleaning the print head (below) ■ replacing an ink cartridge (on page 41) ■ aligning the print head (on page 46) ■ cleaning the printer (on page 47) ■ transporting the printer (on page 48) For more details, see your electronic Reference Guide, as described on page 9.
Using the Head Cleaning Utility Follow these steps to run the Head Cleaning utility (recommended method): 1. Make sure the printer is turned on but not printing, and both the B black and A color ink out lights are off. (If an ink out light is flashing, replace the ink cartridge instead.) 2. If you have an application running, access the printer settings dialog box as described on page 15 (Windows) or page 20 (Macintosh). Or, with Windows, click Start, point to Settings, then select Printers.
7. If the nozzle check pattern has no gaps in its dots, click Finish. If the pattern is missing dots, click Clean to clean the print head again. If you don’t see any improvement after cleaning three or four times, check the solutions in “Problems Getting Good Print Quality” on page 55. You can also turn the printer off and wait overnight—this allows any dried ink to soften—and then try cleaning the print head again.
Or, with Windows, click Start, point to Settings, then select Printers. Right-click the EPSON Stylus COLOR 1160 printer icon in the Printers window. Then select Properties (Document Defaults in Windows NT). 5. Windows: Click the Utility tab. Macintosh: Click the Utility button. 6. Make sure paper is loaded in the printer, click the Nozzle Check button, and click Next. The nozzle check pattern prints (see the next section for details). 7. If the nozzle check pattern has no gaps in its dots, click Finish.
Replacing an Ink Cartridge When the B black or A color ink out light flashes, the indicated cartridge is low on ink. This is a good time to make sure you have a new cartridge. When the light stays on, the cartridge is empty and you need to replace it. You cannot print if either ink cartridge is empty. Leave the empty cartridge installed in the printer until you have obtained a replacement. Otherwise the ink remaining in the print head nozzles may dry out.
Removing and Installing Ink Cartridges You can replace a cartridge when the B black or A color ink out light is either flashing or on. (If you perform these steps when both ink out lights are off, the printer cleans the print heads as described on page 37.) Be sure you have a new ink cartridge before you begin. Once you start the ink cartridge replacement procedure, you must complete all the steps in one session. Follow these steps to replace ink cartridges: 1.
5. Unwrap the new ink cartridge. Then remove only the yellow part of the tape seal on top. You must remove the yellow tape from the top of the cartridge or you will permanently damage it. Don’t pull off the blue portion or try to remove the clear seal underneath the cartridge. black cartridge (S020189) color cartridge (S020191) 6. Lower the new ink cartridge into its holder with the label facing up and toward the back of the printer. 7.
Replacing an Outdated Ink Cartridge When an installed ink cartridge is more than six months old, you may need to replace it if you notice that your printouts don’t look as good as they used to. If print quality doesn’t improve after cleaning and aligning the print head, you can replace one or both cartridges. Follow these steps to replace an ink cartridge before the B black or A color ink out light is flashing or on: 1.
5. Unwrap the new ink cartridge. Then remove only the yellow part of the tape seal on top. You must remove the yellow tape from the top of the cartridge or you will permanently damage it. Don’t pull off the blue portion or try to remove the clear seal underneath the cartridge. black cartridge (S020189) color cartridge (S020191) 6. Lower the new ink cartridge into its holder with the label facing up and toward the back of the printer. 7.
Aligning the Print Head If your printouts contain misaligned vertical lines, you may need to align the print head. Your printer must be connected to a local port, not on a network, to use the Print Head Alignment utility. Follow these steps: 1. Make sure the printer is turned on, but not printing, and letter-size paper is loaded. Load paper that’s at least 8.27 inches (210 mm) wide to prevent ink from spraying inside the printer and smudging your printouts.
Cleaning the Printer To keep your printer working at its best, you should clean it several times a year. Follow these steps: 1. Turn off the printer, unplug the power cord, and disconnect the printer cable. 2. Remove all the paper from the sheet feeder. 3. Clean the exterior of the printer with a soft, damp cloth. 4. Clean ink out of the printer’s interior with a soft, damp cloth. Don’t touch the gears inside the printer.
Transporting the Printer If you move your printer some distance, you need to prepare it for transportation in its original box. Follow these steps: To avoid damage, always leave the ink cartridges installed when transporting the printer. Be sure to remove the tape used in step 4 after installing the printer in its new location. 1. Turn on the printer, wait until the print head locks in the far right position, then turn off the printer. 2. Unplug the power cord from the electrical outlet.
Problem Solving This section gives you the basics for diagnosing and solving printer problems. ■ First see “Diagnosing Printer Problems” to help determine what the cause of the problem may be. ■ Then see “Problems and Solutions” on page 53 for solutions to common setup and software problems. It’s a good idea to check EPSON’s web site periodically for possible updates to your printer driver. Visit www.epson.
P is on The Ppower light is on when the printer is on and ready to print. It flashes when the printer is receiving a print job, charging ink, or cleaning the print head. S flashes and When the S paper out light flashes and both ink out lights come on, you have a paper jam. Press the E load/eject button to try to clear the jam. If that doesn’t work, turn off the printer and gently pull out all the paper. Make sure none of the sheets are curled, creased, old, stuck together, or too thin.
Running a Printer Check You can run a printer check to determine whether a problem comes from the printer itself or some other source. Follow these steps to run the printer check: 1. Make sure both the printer and computer are turned off. 2. Disconnect the interface cable from the printer. 3. Make sure paper is loaded in the printer. 4. Hold down the E load/eject button, then press and release the Ppower button.
Identifying Printer Parts If you need help identifying the parts of the printer, refer to these illustrations: paper support extension (pulls up here) sheet feeder paper support right edge guide printer cover left edge guide output tray output tray extensions thickness lever ink cartridge holders 52 control panel
Problems and Solutions Here are some basic troubleshooting tips if you have any problems setting up your printer, installing software, getting good print quality, feeding paper, or other miscellaneous problems. Problems Setting Up the Printer or Installing Software The printer started making noise after ink cartridge installation. ■ ■ The first time you install ink cartridges, the printer must charge its ink delivery system for about two minutes.
Problems with Printing Only the Ppower light is on, but nothing prints. ■ ■ ■ Make sure the interface cable is connected securely and that the cable meets the system requirements on page 3 or page 4. Run a printer check as described on page 51. If the check page prints, make sure your printer and application software are installed correctly. If you’re printing on a network, you need to set up your printer for network printing, as described in your electronic Reference Guide.
Problems Getting Good Print Quality You see horizontal banding. ■ ■ ■ ■ ■ ■ ■ Make sure the print head nozzles are not clogged. To clean the print head, see page 37. Make sure the Media Type setting matches the paper you loaded. See page 35 for guidelines. Make sure the printable side of the paper is face up. It is usually whiter or shinier. Make sure an ink cartridge isn’t low on ink. To replace an ink cartridge, see page 41 (if the cartridge is more than six months old, see page 44).
Your printout is blurry or smeared. 56 Your printout is faint or has gaps in the image. ■ Make sure the print head nozzles are not clogged. To clean the print head, see page 37. ■ Check the control panel lights to see if the ink cartridges are low on ink. To replace an ink cartridge, see page 41. Make sure your paper or media meets the specifications listed in your electronic Reference Guide. ■ Make sure the Media Type setting matches the paper you loaded. See page 35 for guidelines.
You see incorrect characters. ■ Make sure the interface cable is securely connected and that the cable meets the system requirements on page 3 or page 4. Then try printing again. ■ Make sure your printer is selected in your application, or as the Windows default printer or the current printer in the Macintosh Chooser. ■ If you’re using a switch box with your printer; connect the printer directly to your computer and try printing again. You see wrong or missing colors.
Problems with Paper Feeding Too many copies are printing. Paper jams inside the printer. Make sure the Copies settings in the printer software and your application aren’t both set for multiple copies. Turn off your printer, open the cover, and remove all the paper that’s inside, including any small pieces that may have torn off. Paper doesn’t eject fully or is wrinkled. ■ ■ If the paper doesn’t eject fully, you may have set the wrong paper size. Press the E load/eject button to eject the paper.
Solving Miscellaneous Printout Problems The margins are incorrect. ■ ■ Make sure the paper settings in your printer software are correct for your paper size. See the electronic Reference Guide for instructions. Check your software documentation for instructions on selecting the correct margins for your paper size. The margins must be within the printable area of the page. See “Specifications” in your electronic Reference Guide for more information. The image is inverted, as if viewed in a mirror.
Uninstalling Printer Software Windows 1. Double-click My Computer, then double-click the Control Panel icon. 2. Double-click Add/Remove Programs. Click EPSON Printer Software in the program list, then select the EPSON Stylus COLOR 1160 printer icon. 3. Click the Add/Remove button and follow the instructions. 4. If you’re using the USB port, click EPSON USB Printer Devices in the program list; then click the Add/Remove button. 5. Restart your computer. Macintosh 1. Insert your printer software CD-ROM. 2.
Where To Get Help If you need help with your printer or its software, see the contact information below. If you need help using other software with an EPSON product, see the documentation for that software for technical support information.
To speak to a technical support representative, dial: ■ U.S.: (562) 276-7586 ■ Canada: (905) 709-2567 Call 6 AM to 8 PM, Pacific Time, Monday through Friday and 7 AM to 4 PM, Saturday. Toll or long distance charges may apply.
Index Numerics D 360 dpi Ink Jet Paper, 35 4 x 6-inch Photo Paper, 31 to 32 Default settings, Windows, 17 Digital Camera Correction setting, 24 Documentation, 2 A Accessories, 41, 62 Advanced settings, 28 to 30 Aligning print head, 46 Automatic mode, 16 to 17, 21 B Back light film, 35 Background printing, 22 Banding, 34, 55 Blurry images, 56 Browser, 9 C Cable, printer, 4 to 5 Checking printer, 51 Cleaning print head, 37 to 40 printer, 47 sheets, 35, 37, 47 Color management settings, 29 to 30 Colors,
I N ICM (Image Color Matching) setting, 27 Incorrect characters, 57 Incorrect colors, 57 Ink cartridge replacing, 41 to 43 replacing outdated, 41, 44 to 45 safety instructions, 7 Ink Jet Back Light Film, 35 Ink Jet Transparencies, 35 Ink level, 18, 41 Ink setting, 16, 21, 24, 26, 29 Iron-On Cool Peel Transfer Paper, 35, 59 Network printing, 53 Nozzle check pattern, 38 to 40, 51 L Layout problems, 59 settings, 25, 28, 30 Lever, thickness, 34, 55, 56 Lights, 49 to 50 Low-resolution images, 23 M Macintosh
Printer cable, 4 to 5 check, 51 cleaning, 47 control panel, 39, 49 to 50 features, 1 maintaining, 37 to 47 noise, 54 parts, 52 problems, 49 to 51, 54 status, 18, 22 transporting, 48 Printing advanced, 28 to 30 controlling, 18, 22 Macintosh, 19 to 22 Windows, 14 to 18 with custom project types, 26 to 28 with PhotoEnhance, 23 to 25 Problems installing software, 53 miscellaneous, 59 paper feeding, 58 print quality, 55 to 57 printing, 54 setting up printer, 53 Progress Meter, 18 Project types, custom, 26 to 28
FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception.
EPSON Ink Jet Papers Use EPSON paper and inks to get the same photo quality results that earn EPSON printers all of their awards! EPSON papers are specially coated to work with EPSON quick drying inks. You’ll notice that when prints come out of your printer, you can immediately handle them. There is no drying time, no smearing or smudging, and your image is clean and smooth.
How to Order EPSON Ink and Paper To order EPSON ink cartridges and paper, contact your dealer or call EPSON Accessories at (800) 873-7766 or visit our web site at www.epsonsupplies.com (U.S. sales only). In Canada, please call (800) 873-7766 for dealer referral. Ink Cartridges: Black S020189 Color S020191 EPSON Papers Paper name Size Part number EPSON 360 dpi Ink Jet Paper Letter (8.5 x 11 inches) A3 (11.7 x 16.