EPoX USB PRINTER ADAPTER BT-PA02A ~ User’s Guide ~ DISCLAIMER OF WARRANTIES There are no warranties which extend beyond the description on the face of the EPoX limited warranty. EPoX expressly excludes all other warranties, express or implied, regarding its products; including any implied warranties of merchantability, fitness for a particular purpose or non-infringement.
USER’S GUIDE Thank you for purchasing an EPoX Bluetooth USB Printer Adapter! Your printer will soon be Bluetooth enabled, allowing you to print remotely from desktop PCs, notebook computers, PDAs, Pocket PCs and many other Bluetooth devices without any cables. A. ITEMS INCLUDED IN THIS PACKAGE 1 EPoX Bluetooth USB Printer Adapter 1 User Guide 1 AC/DC Power Adapter B.FEATURES & SPECIFICATION Bluetooth Profile Supported: Serial Port Printer Speed: Up to 115,200bps Printer Interface:USB 1.
C. PRINTER ADAPTER HARDWARE INSTALLATION Plug the EPoX USB Printer adapter into the USB printer port of your printer as shown below. Now, your printer has become Bluetooth enabled. Congratulations!! 1.Plug BT-PA02A into the printer port. 2.Plug the power into the BT-PA02A "Note: Please do not use any other power adaptor with the EPoX USB Printer Adaptor (BT-PA02A). If you have problems, contact your dealer for a replacement. D.
1 Double click the Bluetooth icon to enter the My Bluetooth window. 2 By double-clicking on the Entire Bluetooth Neighborhood icon, you will find all the local Bluetooth enabled devices nearby. PA02AA0 REV 1.
3 Find the EPoX BT-PA02A XXXXXX and double-click on it, the Cable Replacement icon be shown along with all the services offered by the printer adapter. 4 By double-clicking on the Cable Replacement icon, the “Cable Replacement” prompt window appears. It will show the COM port the EPoX Printer adapter will be using. Please make note of it and remember it. "Note: The COM port is automatic assigned and cannot be overridden. PA02AA0 REV 1.
D.2. Specifying the COM port on your printer: If you haven’t installed the printer driver yet, please install it now. 1. By clicking the window Start button, select Setting and, then Printers, the printer setup window will display on the screen. 2. By double-clicking on the Add Printer icon, you will proceed with the printer driver installation for the Bluetooth enabled printer. PA02AA0 REV 1.
3. Follow the installation steps to set up the printer. When choosing the printer port, please set the COM port as same as the BT-PA02A (Reference D.1 4). Windows 2000 Windows 98SE/ME Windows XP PA02AA0 REV 1.
If your printer is already installed with its driver, please change the com port to the same BT-PA02A, and following the steps below: 1. By clicking the Start button, select Setting, and then click on Printers the printer setup window will be displayed. 2. Please select the printer connected to the BT-PA02A, and right-click on its icon, and then select Properties to enter the properties window. PA02AA0 REV 1.
3. If your system is running Window 2000/XP, select the Ports tab. Choose the COM port that is being used by the BT-PA02A and press OK. You are done! If your system is running Window 98SE/ME, and select the Details tab. Choose the COM port that is being used by the BT-PA02A and press OK. You are done! PA02AA0 REV 1.
D.3: Important items to check Whether your printer drivers are installed or not, check the printer’s Properties (Please reference above). If your system is running Window 2000/XP, and click on the Ports tab and check the following two items: 1. Uncheck Enable bidirectional support. 2. Click on the Configure Port. Button, then the COM X Properties prompt window will be shown and chose the 115200 port speed under the Bits per second drop down menu. PA02AA0 REV 1.
3. Afterwards, click the OK button, which will take you back to the Properties prompt window, then click the Apply button and finally, click the OK button. If your system is running Window 98SE/ME, and select the Details tab. 1. Click on the Spool Setting button, please select Disable bi-directional support for this printer and click on the OK button which will take you back to the Properties prompt window like above, and please go to the next step below. PA02AA0 REV 1.
2. Click on the Port Setting.. button, and then the COM X Properties prompt window will be shown and chose 115200 port speed under the Bits per second drop down menu. 3. Afterwards, click the OK button, which will take you back to the Properties prompt window, then click the Apply button and finally, click the OK button. Congratulations!! You finish setting for BT-PA02A. PA02AA0 REV 1.
E.CONNECTIVITY This section will help you verify the connectivity of the BT-PA02A. 1. If you have more that one printer, please set the one with BT-PA02A as the default printer. Window 98SE/ME Window 2000/XP 5 Please double click the Bluetooth icon , and open the My Bluetooth Places (Widcomm Bluetooth Software) window at your computer screen. PA02AA0 REV 1.
2. Double click on the Entire Bluetooth Neighborhood icon, and right click on your mouse, then choose Refresh. The EPoX BT-PA02A xxxxxx should appear. 3. By double-clicking the EPoX BT-PA02A xxxxxx icon, and then the Cable Replacement icon should be shown at the right window. PA02AA0 REV 1.
4. Please double click on the Cable Replacement icon. Afterwards, its color should change to green when it has successfully connected. &Note1: If your Bluetooth device is set to high security, the default PIN code is “0000”. F. TROUBLESHOOTING If you are unable to print from your laptop or other device to the BT-PA02A, then check the following: 1. Make sure that the Cable Replacement icon turns to green before using the BT-PA02A.
G. PRINTERS THAT ARE TESTED AND VERIFIED TO WORK WITH THE EPoX BT-PA02A HP EPSON CANON OTHERS LaserJet 2200D Stylus Photo 1290 BJC 2100SP Xerox Phaser 7700 DeskJet 1120C Stylus C60 S900 Compaq ij600 DeskJet 930C Stylus C61 S200SP Photo Smart P1100 Stylus 480SXU DeskJet 1125C Stylus Color 980 DeskJet 1220C Stylus C41 DeskJet 3420 Stylus 790 DeskJet 5550 Stylus Photo 750 DeskJet 640C H.
EPoX USB PRINTER ADAPTER BT-PA02A ~ Handbuch ~ HAFTUNGSAUSSCHLUSS Der Hersteller haftet lediglich im Rahmen der Produkthaftung gemäss der gesetzlichen Vorschriften. Es wird keine weitergehende Haftung, weder ausdrücklich noch konkludent, für das Produkt gewährleistet. Ausgeschlossen wird die Garantie für die Zusicherung der Handelsüblichkeit, die Eignung für einen bestimmten Zweck oder die Verletzung von Rechten Dritter.
HANDBUCH Danke, dass Sie sich für den EPoX Bluetooth USB Printer Adapter entschieden haben! Ihr Drucker wird bald Bluetooth-fähig sein. Dadurch können Sie in Zukunft von Ihrem PC, Notebook, PDA, Pocket PC und von vielen anderen Bluetooth-Geräten aus kabellos auf Ihren Drucker zugreifen. A. LIEFERUMFANG 1 EPoX Bluetooth USB Printer Adapter 1 Handbuch 1 Netzteil B.
C. INSTALLATION DER PRINTER ADAPTER-HARDWARE Stecken Sie den EPoX USB Printer Adapter in die parallele Schnittstelle Ihres Druckers (siehe Abbildung unten). Dadurch wird Ihr Drucker Bluetooth-fähig. Stecken Sie den Netzteilstecker in den BT-PA02A, um das Gerät mit Strom zu versorgen Stecken Sie den BT-PA02A in die parallele Schnittstelle des Druckers "Achtung: Bitte benutzen Sie ausschließlich das mitgelieferte Original-Netzteil. Kontaktieren Sie bei Problemen zuerst Ihren Fachhändler. D.
D.1: Stellen Sie fest, welchen COM-Port der BT-PA02A Bluetooth Printer Adapter benutzt 1 Doppelklicken Sie unter “Arbeitsplatz” auf das Bluetooth-Symbol . Dadurch öffnet sich das My Bluetooth -Fenster. 2 Wenn Sie auf das Symbol Entire Bluetooth Neighborhood klicken, erscheint eine Übersicht über alle installierten Bluetooth-fähigen Peripherie-Geräte. PA02AA0 REV 1.
3 Doppelklicken Sie den Eintrag EPoX BT-PA02A XXXXXX. Das Symbol Cable Replacement erscheint. 4 Durch einen Doppelklick auf das Cable Replacement-Symbol wird der vom EPoX USB Printer Adapter verwendete COM-Port angezeigt. Notieren Sie sich diese Information; Sie werden sie später noch benötigen. "Achtung: Der COM-Port wird automatisch zugewiesen und kann nicht manuell verändert werden. PA02AA0 REV 1.
D.2. Konfigurieren Sie den COM-Port des Druckers Wenn Sie den Druckertreiber noch nicht installiert haben, führen Sie die Installation jetzt durch. 1. Klicken Sie auf die Start–Schaltfläche in der Taskleiste, wählen Sie aus dem Menü Einstellungen und dann Drucker. Daraufhin erscheint das Installationsmenü für Drucker auf dem Bildschirm. 2. Doppelklicken Sie das Symbol Drucker hinzufügen. Installieren Sie die Treiber für denjenigen Drucker, an den der EPoX USB Printer Adapter angeschlossen wurde.
3. Folgen Sie den weiteren Installationsschritten. Wenn Sie dazu aufgefordert werden, den COM-Port des Druckers anzugeben, wählen Sie denselben Port, den Sie vorher notiert haben. (siehe auch Menüpunkt D.1 4). Windows 2000 Windows 98SE/ME Windows XP PA02AA0 REV 1.
Wenn der Druckertreiber bereits installiert ist, müssen Sie den COM-Port des Druckers der Port-Vorgabe des BT-PA02A anpassen. 1. Klicken Sie zunächst auf die Schaltfläche Start in der Taskleiste und wählen Sie Einstellungen. Klicken Sie im folgenden Menü auf Drucker; das Konfigurationsfenster für Drucker öffnet sich. 2. Wählen Sie den Drucker, an den der Adapter BT-PA02A angeschlossen ist und klicken Sie mit der rechten Maustaste auf das Drucker-Symbol.
3. Wählen Sie unter Windows 2000/XP den Tab Anschlüsse. Versehen Sie den COM-Port, den Sie vorher notiert haben, mit einem Häkchen und klicken Sie auf OK. Klicken Sie unter Window 98SE/ME auf den Reiter Details. Wählen Sie den COM-Port, den Sie vorhin notiert haben und klicken Sie auf OK. PA02AA0 REV 1.
D.3: Wichtige Einstellungen Überprüfen Sie die Eigenschaften des Druckers, unabhängig davon, ob Sie einen Druckertreiber installiert haben oder nicht (Siehe oben). Klicken Sie unter Window 2000/XP auf den Reiter Anschlüsse und überprüfen Sie die folgenden Einstellungen: 1. Die Option Bidirektionale Unterstützung aktivieren darf nicht mit einem Haken versehen sein. 2. Klicken Sie auf die Schaltfläche Konfigurieren.
3. Klicken Sie anschließend auf OK. Dadurch gelangen Sie zurück zum Hauptfenster der Eigenschaften Ihres Druckers. Klicken Sie zum Abschluß auf die Schaltfläche Übernehmen und anschließend auf OK. Wählen Sie unter dem Betriebssystem Windows 98SE/ME den Details-Tab. 1. Klicken Sie auf die Schaltfläche Spool-Einstellungen und deaktivieren Sie die Bidirektionale Unterstützung. Durch einen Klick auf OK schließen Sie die Spool-Einstellungen und kehren zum Hauptfenster zurück. PA02AA0 REV 1.
2. Klicken Sie auf Anschlusseinstellungen. Wählen Sie im folgenden Fenster die Übertragungsgeschwindigkeit 115200 aus dem Drop-Down-Menü des Eintrags Bits pro Sekunde aus. 3. Durch einen Klick auf die Schaltfläche OK schließen Sie die Anschlusseinstellungen und kehren zurück zum Eigenschaften-Hauptfenster. Klicken Sie dort auf die Schaltfläche Übernehmen, anschließend auf OK. Der Konfigurationsvorgang für den EPoX USB Printer Adapter BT-PA02A ist damit beendet. PA02AA0 REV 1.
E. ANBINDUNG PER BLUETOOTH In diesem Abschnitt wird erklärt, wie Sie mittels des Adapters BT-PA02A unter Windows 2000/XP/98/ME eine kabellose Bluetooth-Verbindung zu Ihrem Drucker herstellen. 1. Wenn Sie mehr als einen Drucker verwenden, stellen Sie den Drucker mit dem Bluetooth-Adapter BT-PA02A als Standard-Drucker ein. Window 98SE/ME Window 2000/XP 2. Doppelklicken Sie im “Arbeitsplatz” auf das Bluetooth-Symbol .
3. Klicken Sie einmal auf das Symbol Entire Bluetooth Neighborhood. Drücken Sie daraufhin die rechte Maustaste und wählen Sie aus dem Kontextmenü den Punkt Aktualisieren. Der Eintrag EPoX BT-PA02A xxxxxx sollte erscheinen. 4. Doppelklicken Sie das Symbol EPoX BT-PA02A xxxxxx. Das Symbol Cable Replacement sollte erscheinen. PA02AA0 REV 1.
5. Doppelklicken Sie das Symbol Cable Replacement. Bei einer erfolgreichen Bluetooth-Verbindung leuchtet das Symbol grün. & Achtung: Wenn Ihr Bluetooth-Gerät auf eine hohe Sicherheitsstufe eingestellt ist, lautet die werksseitig eingestellte PIN-Nummer “0000”. F. Fehlerbeseitigung Wenn Sie von Ihrem Notebook oder PC aus mittels des BT-PA02A nicht auf den Drucker zugreifen können, überprüfen Sie folgende Einstellungen: 1. Überprüfen Sie, ob das Cable Replacement-Symbol grün aufleuchtet.
EPoX USB PRINTER ADAPTER BT-PA02A ~操作指南~ 文件編號 : PA02AA0 PA02AA0 REV 1.0 ~32~ 版本 1.
操作指南 感謝您使用磐英藍芽無線 USB 印表機轉接器,桌上型電腦、手提電 腦及 PDA 等有藍芽功能便可透過磐英藍芽無線印表機轉接器印出您滿意的 作品,又可擺脫線路的牽絆。 A. 包裝清單 1 個磐英藍芽無線 USB 印表機轉接器 1 條 AC/DC 電源轉換器 1 份操作指南 B. 產品規格及特色 藍芽傳輸介面: 序列埠 每秒列印速度 : 高於 115,200bps 連接模式: USB 介面 晶片: CSR BlueCore 02 記憶體: 32K Bytes SRAM 電耗: 0.7 Watt, 6 Vdc 電源供應:Input AC 100~240 Volts : Output DC 6V @ 1A 頻率: 2.4-2.4835 GHz 天線: 內建 使用距離: >100 meters (typical 300 meters at line of sight) 操作系統: Windows 98SE/ME/2000/XP PA02AA0 REV 1.
C. 硬體裝置 將磐英藍芽無線 USB 印表機轉接器插到印表機的連接埠,並且插上電 源線,如下圖。完成後您便擁有一台藍芽無線印表機了! 插上 BT-PA02A 插上 AC/DC 電源線 "請注意 : 請不要任意插上除隨產品附上之外提供的 AC/DC 電源轉換器, 如有任何問題請與您購買的商家洽詢。 D.建立連接 在建立連線使用之前,請先檢查您的藍芽物件是否已經完成安裝程序 了;如果您的藍芽物件是磐英出品的 BT-DG02、BT-DG03、BT-MB02 或 BT-DG02A 的話,在完成 Widcomm 軟體安裝後,請按照下面步驟完成 BT-PA02A 的安裝程序;如果您的藍芽物件不是磐英出品的話,請參考廠商 提供的資訊或是與其廠商聯絡。 PA02AA0 REV 1.
D1.請檢查 BT-PA02A 藍芽印表機轉接器所用的連接埠。 1 雙擊藍芽的圖示 進入 My Bluetooth 畫面。 2 雙擊 Entire Bluetooth Neighborhood 圖示,您將會發現鄰近所有的 藍芽物件名稱都在畫面上。 PA02AA0 REV 1.
3 請雙擊 EPoX BT-PA02A XXXXXX 的圖示後,可以看到 Cable Replacement 圖示,這是藍芽印表機轉接器所提供的唯一服務項目。 4 雙擊 Cable Replacement 圖示,Cable Replacement 的對話框將 會出現,從中可看到 BT-PA02A 的連接埠是 COM X,請記住這個連接埠的 數字。 "請注意: 連接埠是自動搜查設定的無法異動。 PA02AA0 REV 1.
D.2. 說明印表機上的連接埠: 假如您印表機的驅動程式尚未安裝,請即刻安裝。 1. 請按開始鍵進入設定進入印表機;或由開始鍵進入設定進入控制台進 入印表機。 2. 雙擊 新增印表機 圖示,請您按照印表機的安裝程序進行安裝有 BT-PA02A 的印表機驅動程式。 PA02AA0 REV 1.
3. 跟著步驟安裝印表機,當畫面出現要選擇印表機連接埠時,請選擇與 BT-PA02A 一樣的連接埠(請參考 D.1 4)。 Windows 2000 Windows 98SE/ME Windows XP PA02AA0 REV 1.
假如您的印表機已經安裝好它的驅動程式了,,請跟著下面的步確認連接 埠是否與 BT-PA02A 的連接埠一樣: 1. 請按開始鍵進入設定進入印表機;或由開始鍵進入設定進入控制台進 入印表機。 2. 請點選插上 BT-PA02A 的印表機,按滑鼠右鍵後點選清單中的內容 進入另外一個畫面。 PA02AA0 REV 1.
3. 假如您的作業系統是 Window 2000/XP,請選擇上標的連接埠,請 點選跟 BT-PA02A 一樣的連接埠,然後按確定鍵。 假如您的作業系統是 Window 98SE/ME,請選擇上標詳細資料 後,請點選跟 BT-PA02A 一樣的連接埠,然後按確定鍵。 PA02AA0 REV 1.
其它重要的設定項目: 請在印表機安裝完成後,進入有 BT-PA02A 印表機的內容: 1. 如果您的電腦系統是 Window2000/XP 時: A. 選取有 BT-PA02A 的印表機後按滑鼠右鍵,點選內容後,請點 入連接埠進入對話框,並將啟用雙向支援功能取消。 B. 然後點選設定連接埠(C)… 鍵進入 COM X 內容畫面,請在每 秒鐘傳輸位元的清單中選擇 115200 後按確定鍵回到前畫面。 C. 然後請按套用鍵後,再按確定鍵,完成所有的設定。 PA02AA0 REV 1.
2. 如果您的電腦作業系統是是 Window 98SE/ME 時: A. 選取有 BT-PA02A 的印表機後按滑鼠右鍵,點選內容,再點 入詳細資料進入對話框後,點選多工緩衝處理設定值鍵進入 另一個畫面,在點選關閉印表機的雙向支援(I)後,請按確定 鍵回到上一個畫面。 B. 點選連接埠設定(O)…鍵,進入另一個畫面,請在每秒鐘傳 輸位元的清單中選擇 115200 後,請按確定鍵回到上一個 畫面。 C. 請按套用鍵後,再按確定鍵,完成所有的設定。 PA02AA0 REV 1.
E.連結 此步驟是幫助您驗證 BT-PA02A 是否確定可以連結使用了。 1. 如果您有多台的印表機,請先設定插上 BT-PA02A 那台為預設印表機。 2. 請雙擊在電腦桌面上藍芽的圖示開啟 “My Bluetooth Places” (Widcomm Bluetooth software)的視窗。 PA02AA0 REV 1.
3. 請雙擊 “Entire Bluetooth Neighborhood”的圖示,在電腦營 幕上點選滑鼠右鍵並選擇 Refresh,此時,EPoX BT-PA02A ******將會出現在視窗中,表示 BT-PA02A 已經安裝 ok 了! 4. 請雙擊在 EPoX BT-PA02A ******後,則視窗中會出現 Cable Replacement 的圖示。 5. 請點選 Cable Replacement 的圖示,不一會兒這個圖示將會變成 綠色,此時表示連結成功了! PA02AA0 REV 1.
F. 故障排除 假如安裝好了 BT-PA02A 在你的印表機後不能從筆記型電腦或其他設備中列 印出來,請參照以下做法: 1. 在使用 BT-PA02A 之前確定 Cable Replacement 圖示是否轉為 綠色,假如沒有轉為綠色則為藍芽無線並無連接上,請參考步驟 E.4 & 5.確定印表機電源是否打開。 2. 假如在您點選 Cable Replacement 圖示後轉為綠色而不能列 印,請檢查 BT-PA02A 本身是否有連接到印表機,同時也檢查印表 機是否有足夠的紙張來列印. 3. 假如所有的檢查都沒問題但你仍然不能列印,請拔去印表機電源並 且重新啟動 BT-PA02A。 4. BT-PA02A 會仿效一個序列連接埠,因此印表機驅動程式必須支援 到序列連接埠去列印,這部分請您與您的印表機製造商接洽。 G.
EPoX USB PRINTER ADAPTER BT-PA02A ~操作指南~ 文件编号 : PA02AA0 PA02AA0 REV 1.0 ~46~ 版本 1.
操作指南 感谢您使用磐英蓝牙无线 USB 打印机转接器;台式 PC、笔记本电 脑以及 PDA 等具备蓝牙功能的设备借助于磐英蓝牙无线打印机转接器即可 打印出让您满意的作品,同时彻底摆脱线缆的羁绊。 A. 包装清单 1 个磐英蓝牙无线 USB 打印机转接器 1 条 AC/DC 电源适配器 1 份使用指南 B. 产品规格及特色 蓝牙传输接口:串口 数据传输速度 : 大于 115,200bps 接口界面: USB 接口 芯片: CSR BlueCore 02 缓冲: 32K Bytes SRAM 功耗: 0.7 Watt, 6 Vdc 电力供应:Input AC 100~240 Volts : Output DC 6V @ 1A 工作频率: 2.4-2.4835 GHz 天线: 内置 有效距离: >100 meters (typical 300 meters at line of sight) 操作系统: Windows 98SE/ME/2000/XP PA02AA0 REV 1.
C. 硬件连接 将磐英蓝牙无线 USB 打印机转接器插到打印机的 USB 连接口,并连接打 印机转接器电源线,如下图所示。完成后您便拥有一台蓝牙无线打印机了! 插上 BT-PA02A 插上 AC/DC 电源线 "请注意:请不要任意插上非产品配套提供的 AC/DC 电源适配器,如有任何问 题请向您的设备供应商咨询。 D.建立连接 在建立连接使用前,请先行检查您的蓝牙 Dongle 软件驱动是否已经 完成安装;如果您的 Dongle 是磐英出品的 BT-DG02、BT-DG03、 BT-MB02 或者 BT-DG02A 的话,在完成 WIDCOMM 软件安装之后,请按 照下面的步骤完成 BT-PA02A 的安装程序.如果您的蓝牙 Dongle 不是磐英 出品的话,请参考该产品厂商提供的技术资料完成安装。 PA02AA0 REV 1.
D1.请检查 BT-PA02A 蓝牙打机印转接器所用的串口资源。 1. 双击蓝牙的图标 进入 My Bluetooth 窗口。 2. 双击 Entire Bluetooth Neighborhood 图标,您将会发现附近所有处 在有效状态下的蓝牙设备列表。 PA02AA0 REV 1.
3. 请双击 EPoX BT-PA02A XXXXXX 的图标之后,可以看到 Cable Replacement 图标,这是蓝牙打印机转接器所对应的服务图标。 4. 双击 Cable Replacement 图标,将会弹出 Cable Replacement 对 话框,这里我们可以看到 BT-PA02A 占用的串口是 COM X,请牢记这个端 口标识号码。 "请注意:这里串口资源是由机器自动分配。 PA02AA0 REV 1.
D.2. 指定打印机上对应的串口资源: 如果您的打印机驱动尚未安装,请先行安装。请点击“开始-设置-打 印机”;或者点击“开始-设置-控制面板-打印机”。 1. 双击“添加打印机”图标,请您参照打印机说明进行操作。 PA02AA0 REV 1.
2. 跟随向导的步骤向下进行,当屏幕提示“选择打印机串口资源时”,请 务必选择同 BT-PA02A 相同的串口。(请参考 D.1 4 部分)。 Windows 2000 Windows 98SE/ME Windows XP PA02AA0 REV 1.
如果您的打印机驱动程序已经安装完毕且工作正常,请按照如下步骤确 认您的打印机是否使用了跟 BT-PA02A 相同的串口资源: 1. 请点击“开始-设置-打印机”;或者点击“开始-设置-控制面板- 打印机”。 2. 请用鼠标右键单击打印机图标(请再次确认打印机同 BT-PA02A 的连接 状况),选择“属性”进入新开窗口。 PA02AA0 REV 1.
3. 如果您的操作系统时 Window 2000/XP,请点击“端口”选项卡,用 鼠标点选跟 BT-PA02A 相同的串口资源,然后确定。 如果您的操作系统为 Window 98SE/ME,请选择“详细资料”选 项,用鼠标点选跟 BT-PA02A 相同的串口资源,然后确定 PA02AA0 REV 1.
其他需要注意的问题: 请在打印机驱动程序安装完毕后,再打开 BT-PA02A 打印机的窗口: 1. 如果您的操作系统是 Window2000/XP: A. 右键单击 BT-PA02A 打印机图标,选择“属性” ,然后点击“端口” 选项卡,将“启用双向支持功能”取消。 B. 然后点击“配置端口”,在标有“每秒位数”的下拉式菜单中选择 115200,点击确定返回前一个界面。 PA02AA0 REV 1.
C. 然后请点击“应用” ,继而点击“确定”完成设置。 2. 如果您的操作系统是 Window 98SE/ME: A. 右键单击 BT-PA02A 打印机图标,选择“属性- 详细资料” ,点击 “后台打印设置”,将“启用双向支持功能”取消,按确定键返回至 上层窗口。 B. 然后点击“配置端口”,在标有“每秒位数”的下拉式菜单中选择 115200,点击确定返回前一个界面。 C. 然后请点击“应用” ,继而点击“确定”完成设置。 PA02AA0 REV 1.
E.连接 此部分是为了帮助您检验您的 BT-PA02A 是否已处在连接状态且可以正 常使用。 1. 如果您有多台打印机,请将插有 BT-PA02A 的那台设置为默认。 2. 请双击桌面上的蓝牙图标运行 “My Bluetooth Places” (Widcomm Bluetooth software)程序。 PA02AA0 REV 1.
3. 双击 “Entire Bluetooth Neighborhood”图标,在屏幕空白处 右击选择 Refresh,至此 EPoX BT-PA02A ******将会出现在 窗口中,说明 BT-PA02A 已經安裝妥当! 4. 双击 EPoX BT-PA02A ******,您会在新出现的窗口中找到 Cable Replacement 图标。 5. 点击 Cable Replacement 图标,稍后该图标将变为绿色显示,表 示连接成功! PA02AA0 REV 1.
F. 故障排除 在安装好 BT-PA02A 之后,您的打印机无法正常工作时,请参照如下解决办 法: 1. 在使用 BT-PA02A 之前确认 Cable Replacement 图标是否已转为绿 色,如没有以绿色显示说明蓝牙无线设备之间没有有效连接存在,此时 请参考步骤 E.4 & 5.并确定打印机电源是否打开。 2. 如果经过您的点选操作之后,遇到 Cable Replacement 图标正常转 为绿色显示,但无法打印的情况时,请检查 BT-PA02A 是否已同打印机 相连,同时还请注意打印纸张供应是否充足。 3. 若做完上述所有步骤的检查且均未发现问题,但您的机器仍不能打印的 话,请关闭机器、移除电源,重新通电之后再次启动机器。 4. BT-PA02A 会虚拟出一个串口进行数据传输工作,因此请确认您的打印 机支持通过串口的连接方式进行打印操作。这里请同您的打印机供应商 联系以获取相关信息。 G.
FEDERAL COMMUNICATIONS COMMISSION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Branch offices /Geschäftsstellen/分公司 EPoX Headquarter EPoX Computer Co., LTD. 10F, 346, Chung San Rd. Sec 2, Chung Ho City Taipei Hsien, Taiwan TEL: 886-2-2247-9888 FAX: 886-2-2247-7888 http://www.epox.com.tw/ E-mail:sales@epox.com.tw EPoX-USA EPoX International Inc. 531 East Jamie Ave La Habra, CA 90631 U.S.A. TEL: 714-680-0898 FAX: 714-680-0858 http://www.epox.com/html/english/default.htm E-Mail:sales@epox.com EPoX-Europe EPoX Europe Computer B.V.