EPONA QUICK START USER MANUAL - FEB 2020 epona biotec limited Product name: Epona Sensor 21 Peninsula Centre Model number: 2000100300 67 Mody Road TST East, Kowloon Hong Kong Tel.: +852 2723 0198 Fax.: +852 2369 1331 www.eponabiotec.
HEADER (CHANGE ON MASTER B) HEADER (CHANGE ON MASTER B) Quickstart FCC STATEMENT Monitoring Horse Temperatures (1) This device may not cause harmful interference, and This quick start guide enables you to use the Epona software on our dedicated tablets which ensure maximum reliability with our system. This guide is for those working with horses in a location which does not include travel or transportation away from a location. 1. This device complies with Part 15 of the FCC Rules.
HEADER (CHANGE ON MASTER B) Start Step 1 check wifi connection is on HEADER (CHANGE ON MASTER B) App loading Step 2 check Epona has provided a login ID Login Step 3 check Data is case sensitive check Bluetooth is on Step 4 check Have the horse name available check check tablet is charged over 50% Double click on the horse icon to start the app. Starting Screen Touch the icon to start the program Enter the username (email) and password.
HEADER (CHANGE ON MASTER B) Add Horse 1 HEADER (CHANGE ON MASTER B) Add Horse 2 Step 5 Attach Sensor 1 Step 6 check use the alcohol wipe to clean horse tail check sensor activated by removing tab check sensor is near the tablet To start monitoring, you will need to create a horse ID. Only after the horse has been created, sensors can be connected to the horse. Horses entered by your organisation are under a title bar with your organisation name.
HEADER (CHANGE ON MASTER B) Attach Sensor 2 HEADER (CHANGE ON MASTER B) Attach Sensor 3 Temperature 1 Temperature 2 Step 7 check sensor name printed on sensor casing A “+” symbol appears at the end of the horse name, which can be pressed to attach any nearby horses. The sensor ID is printed on the side of the casing, double check the printed ID is the same as the screen name. check name of sensor If you have accidentally attached the wrong sensor, click REASSIGN to chose the name again.
40.0 38.0 36.0 34.0 32.0 30.0 28.0 26.0 24.0 22.0 20.0 20.0 Send Reports check wifi connection is on When the monitoring period has ended, click reports on the drop down menu. Click on the the “Location Sensor Readings” 10 Send Reports check dates of readings required A date range can be entered, and the report will be emailed to the login email address in XLS format.