Installation Instructions

ManualsBrandsEpik One ManualsCell PhonesMobile Phone

Basic Operations

Switch on

Touch and hold the Power button until the phone switches

on.

Note: If you have enabled USIM/SIM locking in the Settings

menu, enter the correct PIN number upon power-on before

you use the phone.

Caution: Three consecutive attempts of entering an incorrect

PIN will lock the SIM card. If it is locked, use a PUK provided

by the operator to unlock it.

Switch off

Touch and hold the “Power button” until the Phone Options

screen displays. Tap " Power off ” to switch off the phone.

Unlock

Short press the “Power button” light up the screen,

according to the clues of the screen interface can be

unlocked.

Touchscreen Usage

Use your fingers to perform operations directly on icons,

buttons, and the on-screen keypad.

Tap/Touch/Click

Tap the icon of an App to start it.

Touch & Hold

Touch and hold an item to display a pop-up menu of options.

For example, go to Address Book, touch and hold a

contact on the Address Book page, and a menu of

options pops up.

Drag

Tap an item on the screen and drag it to another place.

Slide/Sweep

To sweep vertically or horizontally across the screen, you

can view apps, pictures, and webpages in a convenient

manner.

Scroll

Similar to sweeping, but faster.

Pinch

Put two fingers on the screen to pinch in or out an item,

such as a webpage or picture.

Home Screen

1. Status bar: allows you to view status icons and notices,

such as signal, battery, current time and data service.

2. Notification bar: On the Home screen, tap the status bar

and drag it down to display the notification bar. Tap this bar.

Then you can view the notices. Touch the return button to

switch back to the previous page.

3. App icon: Tap an app to open it.

4. Main menu: Slide your finger up to enter the main menu

of the application..

Phone Settings

To display the Settings menu, tap the Settings icon directly.

1.SIM card: In the Settings menu, choose SIM Card. You

can then manage your SIM cards on the pop-up page.

2. Network: In the Settings menu, select WLAN to

configure your radio network; or select Traffic usage to

configure your mobile date services; or select Mobile

Network under More to configure data services of your

phone.

3. Sound: In the Settings menu, choose Sound. The allows

you to set the volume, enable/disable vibration during

ringing, and select ringtones for incoming calls and

messages, as well as enable/disable keypad touch sound

effect, touch alert tone, and screen lock tone

4. Display: allows you to configure the brightness,

wallpaper, automatic device rotation, sleep duration, and

font size.

5. Security: In the Settings menu, choose Security. The

Security page allows you to set the screen locking mode

and USIM/SIM locking mode. App Permission: allows you

to configure certain permissions for an App and monitor

their usage.

6. Anti-theft: allows you to remotely lock the phone or clear

all data of it.

7. Manage apps: In the Settings menu, choose Apps. Then

you can view or manage your apps.

Note: Disable or unload certain apps if available space is less than

100MB.

8. Message: On the Message page, tap the Menu button

and choose Settings. On the Message Settings page, you

can enable/disable report sending, create or select a

message template, and configure a message alert tone for

each short or multimedia message.

9. Call: To display the Call Settings page, choose Settings

on the Call page.

Shortcuts

On the Home screen, lightly drag down the Status bar. On

the screen top, a group of shortcuts are displayed, such as

Settings, WLAN, Bluetooth, Brightness, Auto-rotate,

flashlight Airplane mode and so on. Tap any of them to open

it quickly.

Shortcut menu

easy-to-use shortcut menus on the home screen.

On this screen, long press on the screen, the selection menu of

the shortcut function menu will pop up. Click the menu of the

desired settings and complete the function settings according to

the prompts.

Move/Uninstall apps

1. Access the App main menu from the Home screen. On

the ALL App page, tap and hold an app to be put on the

Home screen, and drag it left or right to locate it at a proper

place. In this way, a desktop app is created.

2. On the All App page, tap and hold an app, and drag it to

Uninstall on the desktop. In this way, the app is removed

from the phone.

Note: You are not allowed to uninstall basic apps of the phone.

3. On the All App page, tap and hold an app, and drag it to

APP Info. on the desktop. In this way, details about the app

is displayed.

Call

This phone allows you to make or answer a call, initiate an

emergency call, and launch a multi-party call.

On the bottom left of the Home screen, tap the Dial-up icon.

The Dial-up page is displayed. Enter a phone number and

choose between card 1 and card 2 to make the call. When

you enter the number, the phone will automatically search

among all contacts a number that best matches the entered

numerals, to facilitate your operation.

During a call, tap Add a Call, and this call automatically

switches to Silent mode. Enter the number of another

contact, tap Dial-up, and the previous call automatically

switches to On-hold mode. After the second call is

answered, tap Join. In this way, a teleconference is

established to achieve a multi-party talk.

Note: You need to subscribe to this service from your carrier

before you use it.

You are also allowed to initiate a call by selecting a phone

number from the list of contacts or the Message page.

Contacts

Tap Contacts to open it. The Contacts page offers

management functions. It allows you to view the list of

contacts and related details, make a call or send an SMS to

a certain contact, and share the contact.

Contact import: On the Contacts page, tap the Menu

button, and choose Import/Export to select a mode for

importing or exporting a contact.

Add a contact: On the lower right of the Contacts page, tap

the Add button to add a contact to your phone or

USIM/SIM. Enter the name and number, and tap Finish. In

this way, a contact is created.

Contact list: On the Contacts page, tap the image of a

contact. Details about the contact is displayed. This allows

you to quickly make a call or send an SMS to the contact.

Search contact: On the Contacts page, tab Search, and

enter related information about a certain contact to

search it among the list of contacts.

Message

Tab Message on the desktop. Then you can create and

send an SMS or MMS.

New message: Tap the Add icon on the upper right of the

Message page. The message creating page is displayed.

Enter the name or phone number of the target contact into

Summary of content (3 pages)

PAGE 1
Basic Operations Switch on Touch and hold the Power button until the phone switches on. Note: If you have enabled USIM/SIM locking in the Settings menu, enter the correct PIN number upon power-on before you use the phone. Touch & Hold Touch and hold an item to display a pop-up menu of options. For example, go to Address Book, touch and hold a contact on the Address Book page, and a menu of options pops up.
PAGE 2
the Recipient bar. The phone will automatically search among the list of contacts for one that best matches the entered info. (You can also select the contact from the list of contacts or groups.) Input method: Tap the text editing zone to invoke the keypad. Long press the space bar to switch your input method. Send: After an SMS is complete, tap Send and choose between card 1 and card 2 for sending the SMS. Browser Tap Browser to open it.
PAGE 3
—Connect the equipment into an outlet on a circuit different the exposure limit established by the FCC, tests for each from that to which the receiver is connected. phone are performed in positions and locations as required by the FCC. —Consult the dealer or an experienced radio/TV technician For body worn operation, this model phone has been tested for help.