User Guide Models: ELT0801H and ELT0703H Designed by the EPIK Learning Company California, USA
Welcome! Thank you for purchasing your new HIGHQ™ Learning Tab. This User Guide will provide step-by-step instructions to help you learn to use your new device. After opening the box, make sure the package contents are available for you. Package contents: • HIGHQ™ Learning Tab.
Index Safety Warnings Technical Specifications Hardware Overview Micro SD Card Slot Charging 4 5 6 7 7 Initial setup Basic Android setup HIGHQ™ Learning Tab One-Time Setup 8 8 8 Software Overview Power on/off Unlock and Lock Navigation bar Home screen Turn Wi-Fi on/off and choosing a network 10 10 11 11 12 12 Camera Browsing the Internet Downloading Content from the Google Play Store Change or Retrieve Grown-Up PIN Backup with Google Return Tablet to Factory Settings 13 14 14 14 14 15 Managing Kid’s Pl
Safety Warnings Do not disassemble the product or accessories. Do not use alcohol, thinner, or benzene to clean the surface of the device. The device should be charged for about 6 hours during the first three charge cycles. Do not store the device in places with high temperature, humidity, or dust. Avoid dropping or strong impact. Use an appropriate volume setting. High volume may cause hearing damage when using headphones. To charge the device, use the included USB cable and AC adapter.
Technical Specifications 8” Tablet CPU (Processor) Operating System Browser Internal Storage Memory (RAM) Expansion Slot Screen Camera Screen Resolution Input Method Built-in speakers Earphone Jack USB cable Battery Size Weight Voltage Operating Temperature Network-Access 7” Tablet CPU (Processor) Operating System Browser Internal Storage Memory (RAM) Expansion Slot Screen Camera Screen Resolution Input Method Built-in speakers Earphone Jack USB cable Battery Size Weight Voltage Operating Temperature Netwo
Hardware Overview Buttons and Ports Designed by the EPIK Learning Company California, USA 1. 2. 3. 4. touch screen front camera power button headphone jack 5. 6. 7. 8. micro USB port volume up volume down micro SD slot 6 9. rear camera 10. speaker 11.
Micro SD Card Slot / Charging Micro SD Card Slot Your tablet is equipped with a micro SD memory card slot. You can use a micro SD memory card (sold separately) for additional storage of music, photos, files, etc. When inserting a micro SD memory card, insert as illustrated. Be careful not to insert it at an angle as doing so may cause damage to the tablet or memory card. To remove the card, press firmly and the card will pop out. It is recommended to eject the micro SD card only when the tablet is powered off.
Initial Setup To get started with your new HIGHQ™ Learning Tab. ensure that your tablet has been fully charged before the first use. Press and hold the power button for 5 seconds until you see the Highq Learning Tab™ logo on screen. Allow 1 minute for the tablet to power on. You will be prompted to start the initial setup process. Basic Android setup 1. Language selection: scroll through the list of languages to choose your preferred language then tap Start. 2.
Initial Setup (Cont’d.) Tap Done on the keyboard then tap the green Continue button. 4. Set up security questions: Choose a security question from the drop-down menu beside Question 1. Enter your answer in the box Answer Here. Repeat this step for Question 2. Tap Done on the keyboard then tap the green Continue button. Kids Place One-Time setup When kids are ready to use the tablet, they will have their own personalized content. A parent will need to complete the initial setup first. 1.
Software Overview Your HIGHQ™ Learning Tab features the Android™ operating system, version 5.0 (Lollipop). The included Google Play™ store app gives you access to a catalog of over one million apps. †† In addition, your tablet comes packed with over 30 apps such as the multi-award winning Looney Tunes™ Phonics and Smart Runner series of games. Power On/Off To power on your tablet, press and hold the power button for 5 seconds. To put your tablet in sleep mode, press and release the power button.
Unlock and Lock To unlock the tablet, drag the padlock upwards. To lock, simply press the power button to lock the tablet (sleep mode). Navigation bar The navigation bar along the bottom of the screen allows you to switch between apps. In some apps, the navigation bar becomes hidden. To reveal it, swipe up from the bottom edge of the screen. The left button, back, takes you back one screen. The center button, home, takes you to the home screen.
Home Screen This is the default home screen in Grown-up mode. To learn about using Kid’s Place, refer to the chapter, “Managing Kid’s Place.” Kid’s Place Looney Tunes Phonics McAfee Protection All Apps Google Drive Downloads Settings Turn Wi-Fi on/off and choosing a network If the tablet is in Kid’s Place, tap the home button and enter your Grown-up PIN. 1. Tap Home at the bottom of the screen. 2. Tap Settings. 3. Tap Wi-Fi. 4. Tap the switch at the top of the screen to turn Wi-Fi on or off.
Camera The camera app can be accessed from both Kid’s Place and Grown-ups. Note: photos taken from the camera are accessible to Grown-ups and Kid’s Place. To launch the camera from Grown-ups, tap Camera from the home screen or from all applications. To launch the camera from Kid’s Place, tap Camera. To switch between the front and rear camera, tap options then flip.
Browsing the Internet Your tablet comes preloaded with the Chrome web browser. Locate and tap the icon in your apps. Chrome works just like a web browser on other devices and computers. Back Forward Search and Address Bar Downloading Content from the Google Play store Google Play offers an expansive catalog of apps, music, movies, etc. Change or Retrieve Grown-Up PIN This is where I will explain the process of changing the PIN or retrieving it in the case of forgetting it.
Managing Kid’s Place This chapter will guide you through steps to customize how Kid’s Place works. Entering Kid’s Place If you are using the tablet in Grown-up mode, locate and tap the Kid’s Place icon on the home screen to enter Kid’s Place. Remember that your Grown-up PIN will be required to exit Kid’s Place. Kid’s Place Add/Remove Apps in Kid’s Place You may choose to allow or disallow certain apps from being used in Kid’s Place. 1. Enter Kid’s Place 2. Choose a category 3.
Managing Kid’s Place (Cont’d.) Settings 4. Tap “Settings Option” Refresh Enter your 4 digit pin, Help Select "Manage apps” 5. Each green indicates that the app is in Kid’s Place. Tap to remove. Enable/Disable Internet Access for Apps Kid’s Place allows you to select which apps may connect to the internet. This option is useful, for example, to allow apps to receive updates, or to disallow apps that may display various advertisements. Follow the steps 1-4 for “Add/Remove Apps in Kid’s Place.
Looney Tunes Phonics™ Initial Setup 17 1. Tap the Looney Tunes Phonics app icon to open the application. 2. Tap the white box labeled Student name, enter the student’s name and tap Done on the keyboard. 3. To select a character icon, tap the pencil and paper icon on the top left. Keep tapping to scroll through the characters. 4. To adjust the starting lesson, use the and buttons by the student name. 5. To change the length of Looney Tunes episodes, use the buttons by Episode Content. 6.
Disclaimer • Requires an internet connection. • Google Play requires an internet connection. A Google account may be required to download apps. • Many apps are available to download for free. • Many apps are available for purchase. Android is a trademark of Google Inc. The Android robot is reproduced or modified from work created and shared by Google and used according to terms described in the Creative Commons 3.0 Attribution License. Google Play is a trademark of Google Inc.
Model: ELT0703H / ELT0801H EPIK Learning Company California - USA