Terminal(FWT) User Quick Manual How to enter commands Hidden Menu Ring / Sound Menu Tools Menu Time Menu Setting Menu Data Mode Menu Phone Book Sungil Telecom ( Model Name : SXT-800U ) This document and the information contained in it is CONFIDENTIAL INFORMATION and shall not be used, or published, or disclosed, or disseminated outside Company in whole or in part without Company consent. This document contains trade secrets of Company.
SXT-800U User Quick Manual 2/15 Ⅰ. How to enter commands. - Pick up the handset on your pots. - Press Entry code : ‘##XX’ ( ‘XX’ is 2 digit code ) : Prefix code, “##”, makes a terminal ready to receive commands. A following two digits are command. - Actually, Each commands are a sequence digits to get to a specific function like as a following menu structure. Ex) ‘01’ – SIO : You just choosed Menu ‘0’ and Submenu Menu ‘1’ linked to SIO.
SXT-800U User Quick Manual 4. Setting 3/15 1. New Code 2. Restrict outgoing 3. Reset Phone 4. Voice Privacy 5. Auto gain control 5. Data Mode 1. Voice Call Mode 2. FAX Rx mode(use fax module) 3. ASYNC Data Rx mode(use data module) 4. PC FAX Rx mode 5. PC ASYNC Data Rx mode 6. FAX Tx mode(use fax module) 7. ASYNC Data Tx mode(use data module) 8. FAX Type Setting 9. FAX only Ⅱ. Hidden Menu SIO ‘##01’ + [ Functions ] - You can change SIO configuration for your needs.
SXT-800U User Quick Manual Emergency 4/15 ‘##02’ + [Index] - You can set upto 3 Emergency numbers which has up to 16 digits. - After ##02, Following number is a [ index ] from 1 to 3 associated each emergency number. - After you enter a index, A lockcode prompt sound will be heard immediately. - At this time, You can enter lock code. ( a default lock code is “0000” which can be change for your need) - After you heard confirmation tone for a right lock code, You can set one of Emergency numbers..
SXT-800U User Quick Manual 5/15 A Key ‘##05’ - In the A Key menu, you can set 26 digits A Key on FWT.. - A short go-ahead tone follows a entering a command of “##05”. - Input A Key of 26 digits . - Pressing À will store A Key safely on FWT’s memory.. - If the entered A key is valid, you can hear confirmation tone. Otherwise, you can not..
SXT-800U User Quick Manual 6/15 Ⅲ. Ring / Sound Menu Ring Type ‘##11’ + [Ring type Index] - In the Ring type menu, you can choose one of 9 ring types. - A ring type index is needed after ##11 and a ring type index has from 1 to 9 linked by a specific ring tone. At this moment, you can listen your choosed ring tone on your speaker or a handset of your POTS. If you choose zero,0, It will be canceled. - During playing a choosed ringtone, Pressing À is needed to make done.
SXT-800U User Quick Manual 1 Min Alert 7/15 ‘##14’ + [On/Off] - you can set 1 Min alert on or off. If this option set on, An alert tone will be heared every 1 minute during a call. - To make this alert on, a pressing À key has to follow ##14. - To make this alert off, a pressing ‘#’ key has to follow ##14. Ex) ##14 + À : to make a 1 min alert on ##14 + # : to make a 1 min alert off Service Alert ‘##15’ + [On/Off] - You can set Service alert on or off.
SXT-800U User Quick Manual 8/15 Ⅳ. Tools Menu Caller ID ‘##21’ + [Caller ID type[ - You can select CID type for a caller id type of your POTS.( Default type is non cid ) - There are 3 types of caller ID as belows. - When you choose one of them after entering ##21, press À to make complete - Press ‘#’ to cancel what you did. 1. BELLCORE 2. V.23 3. DTMF 4. None CID Ex) ##21 + 3 + À : to set a caller id type as DTMF caller id. ##21 + 4 + À : to make a displaying of a caller id off.
SXT-800U User Quick Manual 9/15 Ⅴ. Time Menu Alarm ‘##31’ + [HHMM] - You can set the alarm time. - After entering ##31, immediately short go-ahead tone will be heard. - Enter 4-digits for an alarm time like as ‘HH-MM’ of 24 hour type. - After entering an alarm time. press À to alarm on. - To turn an alarm off, Press ‘#’ key after entering this command of ##31. Ex) ##31 + 1540 + À : to set an alarm time to PM 3 oclock 40 minute. . ##31 + # : to cancel predefined alarm time.
SXT-800U User Quick Manual 10/15 Ⅵ. Setting Menu New Code ‘##41’ - You can change a lock code which is being ‘0000’ as default value. - After you enter a command of ‘##41’ , A lockcode prompt sound will be heard immediately. - At this time, You have to enter current lock code to get an authority to change a lock code. - Then, If the entered current lock code is right, a confirmation tone will be heard. - After then, You can try yo enter new lock code.
SXT-800U User Quick Manual Voice privacy 11/15 ‘##44’ - You can set the option of Voice privacy to protect your voice from tapping But It is possible only an operator supports this feature.. - After you enter a command of ‘##44’ , A lockcode prompt sound will be heard immediately. - You can enter lock code. ( a default lock code is “0000” which can be change for your need) - After you heard confirmation tone , You can change the option by doing follows.
SXT-800U User Quick Manual 12/15 Ⅶ. Data Mode Menu - “TX” means “Transmitting” , “RX” means “Receiving” Voice call mode ‘##51’ - You can set a terminal mode to voice mode. - Press À to make completed - Or press ‘#’ to cancel what you did. Ex) ##51 + À : Set a terminal mode to voice mode. FAX Rx mode(use FAX Module) ‘##52’ - Only In case that a terminal has a fax module currently, This command can affect the terminal.. - You can choose one of two behaviors in FAX RX mode.
SXT-800U User Quick Manual PC FAX Rx Mode 13/15 ‘##54’ - This mode enables a user to send and receive a FAX with a computer without a Fax module and a Fax equipment. - You can choose one of two behaviors in PC FAX Rx Mode for a receiving a fax.. < PC FAX Rx Mode > À ‘#’ PC FAX Rx mode will be set always until a user change other mode. We call this as PC FAX Rx always mode for making it easy to say. PC FAX Rx mode will be change voice mode after a terminal receive FAX once.
SXT-800U User Quick Manual FAX TX Mode(use Fax Module) 14/15 ‘##56’ - “TX” means “Transmit” - Only In case that a terminal has a fax module currently, This command can affect the terminal.. - After setting this, You can send a fax data through a FAX machine wihout prefix dialing always. - You can set and cancel this mode as a following table. < FAX TX Mode > À ‘#’ FAX TX mode will be set FAX TX mode will be canceled. A terminal mode will be back to a previous mode.
SXT-800U User Quick Manual FAX Type 15/15 ‘##58’ + [ Fax Type] - You can choose one of two fax types according to your service provider. - A.4 and A.7 came from IS707 standard. < FAX Type> À FAX A.4. It usually be used at PC FAX ‘#’ FAX A.7 Ex) ##58À : To set a fax type to A.4 ##58# : To set a fax type to A.7 FAX Only ‘##59’ - Only In case that a terminal has a fax module currently, This command can affect the terminal. - Actually, this mode is included FAX Tx mode and FAX Rx mode.
--- Additional page --RF EXPOSURE INFORMATION THIS MODEL PHONE MEETS THE GOVERNMENT ’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF)energy set by the Federal Communications Commission of the U.S.Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.