02/15/06 Draft by Daniel Yu SXP-2080 CDMA 1XRTT FIXED WIRELESS PHONE 800 MHz CDMA TECHNICAL MANUAL CDMA FWP SXP-2080 1 Technical & User Manual
Before installing your SXP-2080, carefully remove the contents from the shipping carton and check for evidence of shipping damage. If damage is found, contact your Authorized Sungil Distributor or shipping agent immediately. SAFE OPERATION INSTRUCTIONS IMPORTANT! Before installing or operating this product, read the SAFETY AND GENERAL INFORMATION section of this guide. 9 Install the unit indoors. 9 Install the unit on a hard, flat surface for proper ventilation.
Emergency Battery Backup Each Subscriber SXP-280 Unit comes with a standard internal battery inside, and can be replaced at your local After-Service Centers. SXP-2080 OPERATION SXP-2080’s UI (User Interface) operation is driven by Soft Key which is designated at ① and ② in below picture. ① And ② Keys have different functions linked with what Main LCD displays. For an example, If LCD has IDLE screen,① key has Menu key to get into the main menu by pressing it and ② key is not used.
Press the up navigation key in standby condition, you can show to the dialed numbers And it presses as the lower picture the ⑥key from standby condition and we can adjust the speaker,key beep or earpiece volume on which it depend the condition of hook on/off. Press the down navigation key in standby state, you can control to the volume depend on hook on/off. Power On/Off Operation ③ Power key is using to turn it on/off when a battery is used as power source.
RSSI Indicator Battery Indicator Battery Strength Indicator This product’s battery level indicator is located at right side on LCD. Battery Level expresses battery levels with 3 bars. In case of low battery, Just battery icon displays and there is no level in battery indicator. When a battery level is low level, “Low Battery Warning!” displays and warning tone sounds and a phone will get into shutdown mode.
Speed Dial Speed Dial allows you to use the Speed Dialing feature. You can press the desired number for 2 seconds; gently press the number button longer. Then the phone makes a previously programmed and stored a phone number. Speed Dial can be also used for two digits numbers like “12” and “79”. For example, if the a number is stored at Speed Dial “15”, then press “1” first, and press “5” for 2 seconds ( a bit longer).
Menu Tree Press the “Menu” softkey button. Menu key operation in IDLE state. 1. Phone book 1. Find 1. All 2. Name 3. Number 2. Add 3. Call Info 2. Message 4. My Phone Number 1. Write 2. Inbox ( 0/ 0 ) 3. Outbox ( 0 ) 4. Voice Mail ( 0 ) 5. Erase Msgs 6. Msg Settings 3. Profile 1. Security (0000) 2. Display 3. Hotline 4. Sound 4. Auto Time Out 5. Call Time Display 1. Ring Tone 2. Vol Control 1. Dialed 2. Received 3. Missed 4. Erase 5. Duration 1. Inbox (0/0) 2. Outbox (0) 3. All Msgs 1.
Explain on Menu Tree 0. Hidden Menu 1. System Info 1. Debug Screen If you choose the debug screen, you can show to the information of RSSI, Ec/Io,Rx/Tx Power. Ex) S 14846 (S:System ID) C 0283 (C:Channel) N 00001(N:Network ID) R 100 (R:RSSI / dBm) E 05 (E:Ec/Io) PN 122 Tx -73 (Tx power dBm) 1. System Info In the Test call mode, you can call as below. 1. new 8k Markov, 2. new 13k Markov, 3. 8k loopback, 4. 13k loopback 5. SO54 Markov, 6. SO55 loopback 2. Test Call 2.
1. Phone Book Menu The Phone Book allows you to store frequently used phone numbers and the associated names in your personal directory to make it easy for you to make a call without remembering or entering the phone number. You can store up to 99 entries. Each entry can contain up to 32 digits (numbers), with an associated name of up to 14 characters. 1. Phone Book 1. Find In this menu, you can search Phone Book for an entry using a name, entry number, and group name.
2. Message 1. InBox ( 0 / 0 ) When you receive a text message, the message indicator appeared on the LCD screen at standby time. While reading the message, scroll down to the navigation key to view the list of message options, then press appropriate keys to choose the desired option In box sub’s menu 1. 2. 3. 4. Reply Use this feature to reply your message. Forward Use this feature to forward your message.
3. Profile Menu 3. Profile 1.Security – 1. New Code Your phone prompts you for a four-digit security code for certain features and commands. Access is granted only after correct security code has been entered successfully. The default security code is “0000”. It is recommended that you can change this code at once, write it down, and store it in a safe place away from your phone. Change your Code to New Code 1. 2. 3. 4.
3. Profile 3.Hotline – 1.SetUp This feature is used when there is an emergency situation that has to be made within specific time frame. Hotline, when it is turned on, will automatically call the designated Hotline Number within previously selected Hotline Time. When the phone is on Off-Hook for selected Hotline Time, then the phone will call Hotline This feature automatically dials a specific number at hotline time. 1. Press the ‘Menu’ and select profile, hotline and SetUp. 2.
4. Sound 2.Vol Control This menu allows you to adjust the volume of the phone. There are total of 5 volume levels, from silent, 1, 2, 3, and 4. Each level is indicated by graphic bars, displaying each level of increment. 1. Press the ‘Menu’ and sound and Vol Control 1. Ringer: allows you to adjust the ringer volume for incoming calls, alerts, and alarm. 2. Speaker: allows you to adjust the volume for speaker 3. Earpiece: allows you to adjust the volume for handset 4.
AKey Input Menu A Key “À75259#147À359#” - Press the ‘À75259#147À359#” key - You can show to the message ( Press [Akey] to continue), and press the ‘Akey” softkey - Entering the input mode to AKey. - In the A Key menu, you can make sure that A key is valid. - Input 26 digits of A key what you want to valid. - When you finished input, press ‘Ok’. - If the A key is valid, you can show to the success message - If the Akey is invalied, you can retry input to the AKey.
04.PHONE NO# (Directory Number) * 10 digit 05. ACCOLC (ACCess OverLoad Class) 0~ 15 01. Primary CH System A 06.PRIMARY CH. 02. Primary CH System B 01. Secondary CH System A 07.SECOND CH. 02. Secondary CH System B 08. ACQ SID 09. LOCK SID 10.H-S/NID Ena CDMA HOME SID Enable Yes or No Home SID1~20 11. HOME SID/NID Home NID1~20 LOCK Home SID1~20 12.SID/NID LOCK LOCK Home NID1~20 13. CDMAPREF SYSTEM 14. PRL ENABLE 15. PRL ID 16. OTAPA ENABLE 17. MOB_TERM_HOME 18. MOB_TERM_FOR_SID 19.
WARNING! Only Authorized Service Personnel should remove the cover of your SXP-2080. For further assistance, contact your Authorized Sungil Representative. Please have your unit’s model and serial number ready. The duration of your calls and operate your phone in the most power-efficient manner. Temperature Environment Operating Temperature: From -20°C to +60°C ; Up to 95% relative humidity (non-condensing). Storage Temperature: From -25°C to +75°C; Up to 95% relative humidity (non-condensing).
RF EXPOSURE INFORMATION THIS MODEL PHONE MEETS THE GOVERNMENT ’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF)energy set by the Federal Communications Commission of the U.S.Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
