Installing Software Installing Software 4. When the InstallShield wizard window N e x t” to appear as follow, click the “N continue for the next step. 7. A window will appear as shown to indicate that InstallShield Wizard completed is completed. Click “FF i n i s h” to exit the wizard. 7 B. Uninstalling the Dialer Client program If you want to uninstall the Dialer Client program, Select S t a r t > A l l P r o g r a m > SUNGIL TELECOM > TATA Indicom Dialer > Uninstall TATA Indicom D i a l e r as shown.
Using Dialer Client Running the Dialer Client There are 2 ways to launch the installed Dialer Client. Either by pressing the shortcut icon in the desktop, or by selecting S t a r t > All P r o g r a m > S U N G I L T E L E C O M > TATA Indicom Dialer > TATA I n d i c o m D i a l e r . e x e as shown. Using Dialer Client The main window has 6 Menu Buttons with specific functions. You should select appropriate connection from the SELECT menu before connecting to internet.
Using Dialer Client 2. You can use the “FF i n d” option to find already saved Numbers from the Phone Book. 3. You can send a message by selecting Address a Phone Book number from “A B o o k” and then clicking the Send button. Using Dialer Client 4. If you want to synchronize phone book between PC and R-UIM Card, click the “PP h o n e B o o k” button as shown. Setup This function is to customize the application according to your preferences. 1. W i n d o w This is to set up the window display function.
Using Dialer Client Dial Number. Also you can make multiple profiles to access the internet and see the internet Call logs. ] S h o w I n t e r n e t L o g : If you click this button, you can acknowledge used data volume and time. 3. C o n n e c t i o n S e t t i n g Using Dialer Client To choose Profile name, please follow below procedure.
Using Dialer Client 5. P I N C o d e “PIN Code Change” can only be used when “PIN Status” is enabled. Using Dialer Client To enable “PIN Status”, input the original PIN Code provided. Next, input the original PIN Code and your new PIN Code to change the PIN Code. If the PIN Code is entered incorrectly for three consecutive times, the following window will appear prompting you to enter your PUK Code.
Using Dialer Client 1. Fill in the number you want to send in T o : _ _ _ _ _ _ _ _ _ _” . blank box, “T T o : _ _ _ _ _ _ _ _ _ _”, In the “T ] You can use Multi-Send function by dividing each recipients with a semi-colon “;; ”. ] You can choose the user name in the phonebook instead of typing a recipient number (Except for phonebook stored in R-UIM).
Using Dialer Client Using Dialer Client Please delete ] The message “P stored message(s) in the R-UIM to receive new m e s s a g e ( s ) .”will appear if the SMS inbox in the R-UIM is at its maximum. D e l e t e” button to erase 3. Click the “D message. 4. To return main window, click the top of the right. 19 on Sent Message This menu allows you to see the SMS which is already sent or failed to send. After sending the SMS, the message will S e n t M e s s a g e” menu. be moved to “S 1.
Supplied Accessory Installation CD Gift box Quick Installation Guide Quick Installation Guide SXC-1080 CDMA 1x USB MODEM 27 Memo ED : 02
RF EXPOSURE INFORMATION RF EXPOSURE INFORMATION THIS CDMA USB DONGLE MEETS THE GOVERNMENT ’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your CDMA USB DONGLE is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S.Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
WARNING! Read this information before use Caution Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Compliance Information This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received. Including interference that may cause undesired operation.