SEC-3189 SAM User Manual Rev 1.
Revision History Rev 0.1 2007. 05. 15 First issue Sung Eun Jo Rev 0.2 2007. 05. 21 Replaced “tool bar” with “status bar” Sung Eun Jo Rev 0.3 2007. 05. 28 Added description on installation Sung Eun Jo Rev 0.4 2007. 06. 07 Added contents on Beta 2 Release Sung Eun Jo Rev 0.5 2007. 06. 13 Added contents on Beta 3, Deleted Voice Sung Eun Jo function Sung Eun Jo Rev 0.6 2007. 06. 15 Added Results of the SAR Test Sung Eun Jo Rev 0.7 2007. 06. 20 Modified for VIVO Sung Eun Jo Rev 0.
Contents 1. Installation & Setup ........................................................................................................................... 4 1. SAM Installation ........................................................................................................................... 4 2. Express Card Device Installation ................................................................................................. 6 2. Getting Started.....................................................
SAM User Manual 1. Installation & Setup 1. SAM Installation 1.1 Insert the Installation CD to the CD-ROM Drive. If the installation process does not start automatically, run Setup.exe file in the CD-ROM Drive. Select a language and click “OK”. (Do not plug the Express Card in the PCI express port before you finish installing SAM.) 1.2 To continue installation, click “Next”. 1.3 Select a folder and click “Install”.
SAM User Manual 1.4 In first time use of modem, the device Driver must be installed. Click “Yes” and then click “Continue Anyway” when Software Installation warning appears. If device Driver is installed, click “OK” and wait until the installation is finished. 1.5 If SAM is installed successfully, click “Finish”.
SAM User Manual 2. Express Card Device Installation 2.1 After finish installing SAM, plug the modem in the PCI express port. Then, the New Hardware Wizard window appears to install the SIT HYBRID MODEM Composite Device. 2.2 Select “Install the software automatically (Recommended)” and click “Next”. 2.3 If the system finds modem driver, the “Hardware Installation” warning message appears. Click “Continue Anyway”. 2.4 If installation is complete, click “Finish”.
SAM User Manual 2.5 The New Hardware Wizard appears to install the SIT HYBRID MODEM Modem. Installation procedure is the same with that of SIT HYBRID MODEM Composite Device. Click “Next”. 2.6 Click “Continue Anyway”. 2.7 Click “Finish”.
SAM User Manual 2.8 The New Hardware Wizard appears to install the SIT HYBRID MODEM Status. Installation procedure is the same with that of SIT HYBRID MODEM Composite Device. Click “Next”. 2.9 Click “Continue Anyway”. 2.10 Click “Finish”.
SAM User Manual 2. Getting Started 1. Plug the modem in the PCI express port, and select “sam.exe”. Then the following initial window appears. 2. If the modem is not properly plugged in, the following message appears. 3. If the system finds the modem, SAM is started as in the following figure. 3.
SAM User Manual 1. To access Internet, click “Internet”. 2. Click “Edit” to edit a connection profile. 3. Set the profile for connection. 4. Select a profile from the list, and click “Connect”. If you click “Auto Connect”, the modem will be connected with 1x/3G or 2G depends on where you are. 5. If Internet is accessed, “Connected” is displayed in message box. Rx or Tx status appears, and the Internet connection icon appears in the top right of the program window. 6.
SAM User Manual 4. SMS 1. Send 1.1 To send a message, click “SMS”, and select “Send”. 1.2 Write a message, enter the numbers of the receivers one by one, and click “Add”. To delete a number from the list, select the number and click “Del”. 1.3 Select “Normal”, “Urgent” or “Emergency” for the priority of the message, and click “Send”. 1.4 To send a message to numbers of users, the window shows the current number of receivers. 1.5 To send a message at the designated date and time, click “Reserved”.
SAM User Manual ▶ You can use the following functions with the buttons provided under the list or by rightclicking the mouse button on an entry in the list. - Search : You can search numbers in the Address Book. - Clear : The message you have written is all cleared. - Emoticon : You can select/edit emoticons and insert them in the message. To insert an emoticon, double-click the emoticon, or select and click the “Insert” button. To edit an emoticon, click “Edit”, edit the emoticon.
SAM User Manual automatically saved in Inbox. To set the “Incoming SMS Alert” option, press the “SMS” tab in the “Settings” menu, and set “Incoming SMS Alert” option. Refer to “7. Settings” for details. 2.2 If there are messages you have not read, the count is indicated in the Status bar (in the bottom of the window). 2.3 The messages are sorted by Number, Name, Date and Content in the “Inbox” menu.
SAM User Manual ▶ You can use the following functions with the buttons provided under the list or by rightclicking the mouse button on an entry in the list. - Forward - Add - Delete : Select this button to forward a message to other persons. The "Send” menu is automatically selected, and the content is automatically entered. : Select this button to add the sender in the Address book. Enter information, select PC or Modem, and then, click “OK”. : The selected messages are deleted from the list. 4.
SAM User Manual 5. Spam 5.1 In the “Spam” menu, the filtered messages containing specific numbers or words are listed. The messages are sorted by Number, Name, Date and Content. 5.2 You can select the numbers or words you wish to filter as spam message in the “SMS” tab of the “Settings” menu. You can select “Use” or “Not Use” in “Spam Message Settings”, and add/edit/delete the Spam numbers with the “Add”, “Edit” or “Delete” button in the Number list.
SAM User Manual 5. Address 1. List 1.1 To save a phone number in the Address book, click “Add” under the phone numbers list. Select the location between “PC”, “Modem” and enter Name, Mobile, Group, Home, Office, FAX, Address, E-mail and Comment, and then, click “OK”. ▶ You can use the following functions with the buttons provided under the list or by rightclicking the mouse button on an entry in the list. - Add: Add a new number in the Address book.
SAM User Manual 2.1 To search an entry in the list, select a field (Name, All no, Mobile, Group, Address, Home, Office, FAX, Email, or Comments) in the top left of the list, enter a name or number, and then, click “Search”. Then, the entries containing the name or number are listed. 2.2 You can search entries in a specific storage (PC, Modem or All) by clicking the concerned button under the search field. 3. Group 3.
SAM User Manual 6. Log 1. Internet Log 1.1 The “Total” field under the list shows the total time, the total bytes of the sent data and the total bytes Kbytes of the received data. 1.2 The Internet Log list displays information on Internet usages such as dates, time, Tx and Rx. 1.3 On the top of the Internet Log list, there’s the current log count. ▶ You can use the following functions with the buttons provided under the list or by rightclicking the mouse button on an entry in the list.
SAM User Manual 7. Settings 1. General Settings 1.1 If you select “Auto termination when windows go to power saving mode” in “Windows Settings”. the program is automatically exited when the PC is switched to the power saving mode. If you select “Auto execution when windows start”, the program is automatically started when the Windows is booted. If you select “Execute SUNGIL Access Manager on Background”. when you click “Exit”, the program is reduced to a tray icon and runs on the background. 1.
SAM User Manual 2.1 You can select the incoming call alert method. If you select “Blinking Tray Icon”, the tray icon flickers. The notice pops up if you select “Auto Pop-up”, or an alert tone sounds if you select “Sound prompt”. Or, you can select all the options. 2.2 If “Auto Delete” is “On”, when the memory is full, the program automatically deletes the messages in FIFO (First In First Out) to save a new message. If it is “Off”, the messages are not deleted, and no new message is saved. 2.
SAM User Manual 4.1 4.2 4.3 4.4 “My Phone Number” shows your phone number. “Version” shows the SAM version, and the S/W and H/W version of the modem. “PRL ID” shows the PRL ID of the modem. “Memory Information” shows the used space in the modem for Address book and SMS in percentage.
SAM User Manual 8. Web 1. If you click “Web”, the Internet browser is started, moving to a specific URL. 9. Email 1. The Email client or the web mail selected by the service provider is started. 10. Others 1. File 1.1 With the “CSV Import” menu, you can import an address book to SAM. Click “CSV Import”, select a csv file in the search window, and click “Open”. If the “Field Mapping” window pops up, select the matching items, and click “OK”. If import is successful, the success message is displayed.
SAM User Manual 2. View 2.1 You can select any submenu from the “View” menu on the menu bar. 3. Help 3.1 You can view description on a function with “Quick Guide”. 3.2 If you select “About”, the SAM version and the Home address of Sungil Telecom are displayed. 4. Internet Access Status Icon 4.1 The Internet Access Icon is activated if the system is accessed to Internet. If you click the icon, the customer site is displayed.
SAM User Manual 5. Tray Icon 5.1 The tray icon indicates if the modem is plugged in. Right-click the tray icon and select “Restore” to enlarge the SAM window. Select “Connect” to access Internet, or ‘Exit” to exit the SAM program. To power off the modem, click “Power Off”. When the modem is powered off, click “Power On” to power on the modem. 6. Mass Storage 6.1 To use the Mass Storage function of the modem, Move the sliding switch(at the front of the modem) to the left side.
SAM User Manual 11. Specification Main Operation Chip CDMA Standard MSM6500 IS-856(1xEVDO), TIA/EIA/IS-2000, IS-98E, Backwards compatibility with IS-95 A/B Band Designation 1X/EV-DO : 800/1900 MHz Transmit Band 824 ~ 849 MHz / 1850 ~ 1910 MHz Receive Band 869 ~ 894 MHz / 1930 ~ 1990 MHz Data Rate Download: Max 2.
SAM User Manual RF EXPOSURE INFORMATION THIS CDMA DONGLE MEETS THE GOVERNMENT ’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your CDMA DONGLE is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S.Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population.
SAM User Manual WARNING! Read this information before use Caution Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Compliance Information This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received. Including interference that may cause undesired operation.