EOSP-500 Dual Zone Streaming Music Player menu User Manual TM commercial wireless audio
Thank You For Choosing Eos Wireless! We hope you will get much enjoyment from your wireless audio system. Please read the entire contents of this manual. It is filled with reference information that will allow you to get the most from your new Eos system. If you have any questions, please check our web site at pro.eoswireless.com/support or call us at 877-465-3927. Your Total Satisfaction – Eos Job #1 Congratulations on your purchase of the Eos Digital Pro Series Audio System.
Table Of Contents Contents Important Safety Instructions 4 FCC Information 5 Limited Warranty 6 Product Support 6 Player Setup 7 Network Configuration 7 Registering the Player 7 Audio Connections 8 Wireless Operation 9 Installing the Eos Wireless Transmitter Card 9 Linking Wireless Transmitters & Receivers 9 Linking Procedure 9 Adding Additional Wireless Speakers/Receivers 9 Controls & Functions 10 Player Op
A Consumer Guide to Product Safety Important Safety Instructions Please take the time to follow the instructions in this manual carefully. It will help you set up and operate your system properly and enjoy all of the advanced features. Please save this manual for future reference. WARNING: To reduce the risk of fire or electrical shock, do not expose the product to rain or moisture. Avoid prolonged exposure to direct sunlight. WARNING: Liquids can cause a failure and/or a fire hazard.
A Consumer Guide to Product Safety FCC Information Information about products that generate electrical noise if applicable, this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
A Consumer Guide to Product Safety Limited Warranty IntelliTouch warrants this product to be free from manufacturing defects in material and workmanship under normal use and conditions for a period of 1-year from date of original purchase in the United States. In order to validate your warranty, you must register your product by going on-line (pro.eoswireless.com/register), or by calling 877-465-3927 between Monday through Friday, 8:30AM to 5PM Pacific Time.
Connections Player Setup 1. Connect the power adapter to wall outlet and plug the connector to player’s power jack. 2. Connect ethernet cable from player to any open port on your internet router. 3. Press POWER button to power on player. Network Configuration Note: The Streaming Media Player is set to DHCP as a default. If your router is set to DHCP, no network configuration is necessary. If your router is configured for a static IP address, follow the instructions below. To set a static IP address: 1. 2.
Connections Audio Connections Wired Audio Connection wired speakers 1 Eos streaming music player POWER AMP power amp 9 3 1 Connect power supply to outlet 2 Connect player to open LAN port on router 2 LAN INTERNET POWER router 3 cable/dsl modem Wireless Audio Connection wireless speakers 1 Eos streaming music player 2 4 power 9 1 Install wireless audio card (EOSP-510) 2 Connect power supply to outlet 3 Connect player to open LAN port on router 4 3 Plug in wireless speakers and/
Connections Wireless Operation Installing the Eos Wireless Transmitter Card You can add a wireless transmitter card to the Eos Streaming Music Player to allow your audio to play wirelessly to Eos Wireless speakers and receivers by following the procedure below. 1. Unplug power from Eos Streaming Music Player 2. Remove the two Phillips head cover plate screws and cover plate 3. Insert wireless card into slot until connectors mate and card is seated completely. 4. Replace and secure Phillips head screws.
Player Operation Controls & Functions LCD Display Displays current station/song/artist name & features /settings Monitor Volume Controls level of built-in monitor speaker Select - Enter Knob Controls selection of stations and navigation of features/settings Monitor Source Controls source played though monitor speaker menu Station Memory Presets Stores and recalls memorized streaming radio stations (up to 10 stations) Shift Key Provides access to memorized stations 6-10 Master Volume Controls Controls
Player Operation Player Operation Choosing a station 1. Press the SELECT button to enter the main menu 2. “Stations” will be the selected setting in the menu 3. Press the SELECT button to enter the“Stations” Menu 4. A list of available stations will be displayed 5. Turn the select knob to scroll to the desired station 6. Select the station by pressing the select button The station will begin to play and the display will return to the default window.
Connection to Music On-Hold & Paging Wireless Music On-Hold (Zone 2) The Streaming Music Player has a built-in USB Flash Drive MP3 player on Zone 2. Audio output from this built-in MP3 player can be used to provide music/message on-hold to a telephone system through the Wireless Transmitter Card (EOSP-510) to an Eos Wireless Transceiver (EOSP610) in receive mode, connected to the MOH input of the phone system.
Audio Line Inputs and Outputs The Streaming Music Player features line level inputs and outputs that facilitate virtually any connection option required. Zone 1 Output Zone 1 features a stereo/mono line level outputs for connecting to an amplifier. If using a mono amplifier, connect to the Right Channel and select the MONO position on the mode switch. Zone 1 Paging Input When connected to a paging amp or phone system paging output, the line level input will monitor for audio.
TM commercial wireless audio 877-465-3927 www.eoswireless.