Manual USB DJ Controller
Page 2
Contents Welcome.............................................................................. 4 Getting started .................................................................... 5 Top panel features .............................................................. 6 Disposal .............................................................................. 19 Warranty ............................................................................. 20 Warranty Card.................................................
Welcome You have made an excellent choice with the purchase of this quality product supplied by Accession ApS. By doing so you now have the assurance and peace of mind, which comes from purchasing a product that has been manufactured to the highest standards of performance and safety, supported by the high quality standards of Accession ApS.
Getting started Installation Make sure to remove all foam and plastic padding. Connect all cables. Always disconnect from computer so it is not getting any power before cleaning. Damages caused by non-observance are not subject to warranty.
Top panel features BELOW IS A DESCRIPTION OF THE FUNCTIONS OF THE CONTROL. 1. PLAY/PAUSE Each time you press the PLAY/PAUSE button, the operation changes from play to pause or from pause to play. 2. CUE By pressing the CUE button you will return to the track to the CUE point and pause it (if you have not set a CUE point with the PAUSE button yet, the CUE point will be the beginning of the track).
press and hold the CUE button to start playback. When you release the CUE button, the track will return to the CUE point and the track will be paused. While you are holding down the CUE button, you can press PLAY then release both buttons to allow playback to continue normally. 3. PITCH ± Pressing one of these buttons will bend the pitch of the track on that deck, slightly decreasing or increasing its speed.
Search mode: When the Scratch LED is unlit and the deck is paused, moving the JOG WHEEL will search through the track on that deck. If the deck is playing while in Search mode, moving the JOG WHEEL will bend on the pitch of the track on that deck, slightly decreasing or increasing its speed. When you release the button, the track will return to its normal pitch (this is an important feature when manually aligning the beats of two tracks). 5. LOAD Press this button to load the selected track on that deck.
in either USB or CD mode. 9. BASS Adjusts the low-end frequencies of the music on that deck. 10. VOLUME Adjusts the volume level of the music on that deck. 11. MASTER VOLUME Adjusts the volume level of the entire mix (the music from both decks heard together). To adjust the volumes of each deck separately, use the VOLUME knobs. 12. SCRATCH/SEARCH Press this button to put the JOG WHEELS in Scratch mode or Search mode. When this LED is lit, the JOG WHEELS are in Scratch mode.
opposite deck automatically. 15. CROSSFADER Slide the CROSSFADER towards a deck to cause the deck’s track to be heard in the mix. This is an important tool for blending the track together, moving from one track to the next, and creating a good overall mix. 16. POWER INPUT For connecting the included USB cable for connection to a computer.
Software Installation 1. When you insert the software CD, the below screen will pop up. Select the language you want, click OK.
2. The below screen will pop up. Click I agree.
3. The screen shown below will pop up. Click Next (you also can tick the Desk top shortcut).
4. Now the file as shown below will pop up. Click Next (you can click browse to select the destination folder).
5. Then the below screen will pop up.
6.The screen shown below will pop up. Click Finish, and the interface of the typed in serial no will appear.
The below will be shown (serial no. sticker on the back of the unit). Type in the serial no. Click Submit, and the following interface will be shown. You are now able to operate the unit.
For more information on how to operate the program, please visit http://www.mixvibes.
Disposal Batteries, equipment electrical (EEE) and contains electronic materials, parts and substances, which can be dangerous to the environment and harmful to human health if waste of electrical and electronic equipment (WEEE) is not disposed of correctly. Batteries, electrical and electronic equipment, which is marked with the WEEE logo (as shown on the left), should not be thrown away with your household waste.
Warranty We want you to be completely satisfied with your purchase so this EnVivo product is backed by a comprehensive manufacturer’s 3 year warranty and an outstanding after sales service through our dedicated Helpline. If you require technical support or in the unlikely event that the purchase you have made is faulty, please telephone our Helpline for immediate assistance.
Warranty Card USB DJ Controller 57906 Please keep your purchase receipt together with your warranty card Name Address Date and location of purchase Detailed description of malfunction Supplier: Accession ApS / Nibevej 54 / DK-9200 Aalborg SV / www.accessionx.
