Disk RFID Reader Model RFID-READER DISKREADER User Guide Revision 1.
Contents 1. Product Description .................................................................................................... 3 2. Features ........................................................................................................................... 3 3. Specifications.................................................................................................................. 3 4. Absolute Maximum Ratings ......................................................................
1. Product Description RFID-READER DISKREADER is a high performance ISO15693 protocol HF RFID reader. It is designed upon fully self-intellectual property. Based on proprietary efficient anti-collision algorithm, it supports fast tag read/write operation with high identification rate. It can be widely applied in many RFID application systems such as logistics, personnel identification, conference attendance system, access control, anti-counterfeit and industrial production process control system. 2.
Supported Transponders ISO 15693 (ISO 18000-3 MODE 1) IP30 5…95 % (non-condensing) Protection class Relative air humidity 4. Absolute Maximum Ratings Parameter Value Ambient operating temperature 0℃ to +55℃ Storage Temperature -20℃ to +70℃ Total Power Dissipation 1.2W Total Power Dissipation on Antenna 380mW 5. Installing the USB Drivers At first connection to the PC USB port, Windows® will detect the RFID-READER DISKREADER and will ask to install a driver.
operations according to the antenna and type of tag to be used. In addition, Px Explorer can display additional information such as the Product Reference and Firmware version and revision. This section describes how to start with Px Explorer. 7. Install Px Explorer To install Px Explorer software, insert the product CD-ROM into the disk drive on your PC and run the Setup from the Software\Px Explorer folder and click “Next” Click the “Browse” button if you want to choose a specific installation folder.
Click “Next” to start the installation process. A shortcut will be created on your desktop and a program group will be created in the start menu. Running Px Explorer Before launching Px Explorer be sure which COM port number is assigned to the T P200u reader. Open the Device Manager and select “View > Devices by type” Power up the RFID-READER DISKREADER and connect the USB cable to both your PC and the RFID-READER DISKREADER. Run Px Explorer. If the following window is displayed click yes.
RFID-READER DISKREADER is 115200 Bauds Click OK. Now Px Explorer is ready to communicate with your RFID-READER DISKREADER. 8. Reading and Writing a Tag Px Explorer includes a Wizard function used to guide you each step of how to read or program a tag. We recommend using the Wizard function for users who are not familiar with all Px Explorer capabilities and features. Click on the Wizard icon (magic wand) to open the Px Explorer Wizard dialog box.
Select the type of chip from the drop–down menu or place the tag on the antenna and click the “Detect “ button to automatically detect the tag type. Select the desired operation (Read or Write) and then click OK. All the necessary windows to perform the desired action will be automatically displayed on the screen.
FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.