sate. i J 383: Environs Checkroom hen Handheld Chemical Detector Quick Reference Guide 1. Utility connection A. Color display 3. Right button (ON) ERs a 4. Menu button 5. Left button 6. Battery clip 7. Battery hatch 8. Air inlet with rain cap 8. Air inlet switch 10.
1. Plug the mains power supply into 110. 240VAC and 50. 60Hz 2. Open the bottom lid 3. Connect the output of the mains power supply to the connector 4, Charge the lee-ion battery for approximately 5 hours to achieve full charge 1. Open the air intake hy rotating the switch 180° counter-clockwise 2. Start the detector by holding down the right button for 3 seconds 3.
eo 1. Press middies button and select Confidence check 2. Follow the on-screen instructions Wireless option LE So sane 1. Hold the right button for 2 seconds 2. Press the middle button confirm the shutdown 3.
1. Shut down the detector 4. Open the air intake by rotating the switch 180° counter-clockwise 3. Press the air inlet switch and continue rotating until if loosens up 4, Pull the dust filter out 5. Push a new dust filter in 6. Press the alr inlet switch and rotate it clockwise until it tightens 7. Close the air intake by rotating the switch 180° clockwise Copyright © 2019 Environs Oy. All rights reserved. 4 25.06.