MC USER GUIDE $&
CONTENTS 1. PAIRING 3 2. USING “IMFONE MC” WITHOUT SUPPLEMENTARY SOFTWARE 4 3. USING “IMFONE MC” WITH SUPPLEMENTARY SOFTWARE 4 3-1.Mode Menu 5 3-2.Pairing Menu 5 3-3.
WELCOME Thank you for purchasing imFONE MC. The product provides easiest and ingenious way to use your headset with PC. We hope that you enjoy using it. This Guide provides instructions on the setup and usage of your imFONE MC. APPEARANCE 1. PAIRING Before using your imFONE MC for the first time, you must pair it with a Bluetooth headset or hands-free. Follow the steps for most headsets. For manipulating headsets, please refer to the headset user guide. STEP 4 STEP 6 STEP 5 1. 2. 3. 4. 5.
7. When the pairing is successfully made, you can find the headset information on the “Device” page. Click the “Device” menu to check it. Once pairing is made, you need not repeat the process to use your imFONE MC on another PC. 2. USING “IMFONE MC” WITHOUT SUPPLEMENTARY SOFTWARE Follow these steps: 1. Plug imFONE MC into the USB port of a PC. 2. Turn on the headset. The headset automatically detects the imFONE MC and makes connection to it.
3-1. Mode menu If you click “Mode” menu, you will find 3 different modes in which imFONE MC works, namely, Audio, SKYPE, Presentation. - Audio Mode: this is the default mode. Select this mode to use your headset as a normal PC headset. To activate/deactivate the headset, use the call-control button of the headset. - SKYPE Mode: Select this mode when using headset with SKYPE, an internet phone program. When you receive or make SKYPE calls, the headset beeps.
In this menu, you can find “Set Paring”, and “Quick Connect” button. - Set pairing: Please refer to the “Pairing:” section of the manual on Page 3. - Quick Connect: Click “Quick Connect” button to connect imFONE MC to the headset. You can do the same thing by pressing the call-control button of the headset. 3-3. Device Menu imFONE MC Information Headset Information In the device menu, you can find information on the devices that are actively connected to the PC(and thus, to the program).
* Section 15.21 Information to user The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. * IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user's authority to operate the device.
