Contents BEFORE USING YOUR HANDS-FREE “BHF-100” 3 Check the Package 3 Check for phone compatibility 3 Overview 3 Charging your Hands-free 4 Status Indicators 5 BLUETOOTH PAIRING 5 USING YOUR HANDS-FREE “BHF-100” 6 Answer / End / Place a call 6 Call transfer back to phone 6 Call Reject 6 Last Number redials 6 FAQ 6 TROUBLESHOOTING 7 SPECIFICATION 8 GLOSSARY 8 Safety and General Information 9 ONLINE PRODUCT REGISTRATION 10
Hands-free BHF-100 Bracket Vehicle power charger User’s guide AC adaptor (fig.1) Check the package Package of the product is composed of a product main body, a sun visor mount bracket, a vehicle power charger, a user guide, and an optional AC adapter (see the above illustration). Please check before using. Be sure to use the provided vehicle power charger or AC adapter exclusively for BHF-100. In case any problem occurs by use of other adapters, we assume no responsibility or liability.
5. Mute button 6. Charging Socket 7. Speaker 8. Microphone Charging your Hands-free BHF-100 Use only the vehicle power charger provided. BHF-100 uses a rechargeable battery that must be fully charged before you use it for the first time. Connect the supplied wall charger or vehicle power charger to power socket and then to your Hands-free. The charger indicator is illuminated red while charging and change to green when the Hands-free is fully charged.
BLUETOOTH PAIRING Before using your hands-free for the first time, you must pair it with another Bluetooth device, such a mobile phone. Follow the steps for most devices. You can also refer your phone user guide. 1. Turn on both devices. For Hands-free, use the power switch as shown in fig. 2. 2. Place the Hands-free in pairing mode by pressing and holding the multi-function button. Release the button when the status indicators begin to flash on shifts. (Fig.5) (fig.5) 3.
USING YOUR HANDS-FREE “BHF-100” Answer/End/Place a call – To answer a call, short press the Multi-function button. To end a call, long press the Multi-function button. (More than 1 sec.) To place a call using voice dialing, short press the Multi-function button. If you are on a calling using your phone handset, you can transfer the call to your hands-free by a short press of the Multi-function button.
A: You have to activate the Bluetooth function of your mobile phone and pair it with the Hands-free. Q4. Does the Hands-free work with all types of mobile phone? A: NO. It works only with Bluetooth enabled mobile phones. If you want to use your mobile phone not supporting Bluetooth, we recommend you to purchase an Audio Gateway. Q5.
The sound quality seems to be deteriorating Try charging the Hands-free using the charging cable supplied. Try muting and then un-muting the handsfree. This process will reset the microphone. Bluetooth phone doesn’t response quickly when I press multi-function button. You may have to wait a little longer. Sometimes, it takes more time to connect compared with regular mobile phone. * If you need more Help? Web: www.enus.co.kr (Support for BHF-100 and tips) SPECIFICATION 1.
without wires or cords over a short distance of approximately 10 meter. ② Profile Bluetooth profiles are protocols through which Bluetooth devices communicate with other devices. Bluetooth phones support different sets of profiles - most support the headset profile but some support the hands-free profile and others support both profiles. In order to support a certain profile, a phone manufacturer has to implement certain mandatory features within the phone's software.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. * Section 15.21 Information to user The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.