User's Manual

ManualsBrandsENUSTECH ManualsCell PhonesSmartphone remote Controller

CODAWheel Manual

CODAWheel is a remote control designed for smartphones, based on Bluetooth Low

Energy (BLE) technology. Its primary purpose is to facilitate the use of voice

command services such as Siri® or Google Now® in Bluetooth hands-free mode in

your car. Further, you can also edit its settings to perform various tasks using the

configuration app, CODAWheel.

Minimum Requirements

- iOS® ver 7.0 and up with Siri or Android® Kitkat with Google Now and support for

BLE.

Factory-builtor 3rd party in-car Bluetooth hands-free system/device recommended

for voice command inside a vehicle.

1. Activating CODAWheel

Turn power on by sliding the button on the back of CODAWheel. Through Bluetooth

Low Energy (BLE) technology, CODAWheel’s stand-by time is expected to last

several years and therefore, turning off power is virtually not necessary under normal

conditions. You may attach double sided tapes or Velcro® sticky fastener to the back

of the CODAWheel for mounting purposes.

2. Pairing CodaWheel

Before pairing, make sure that CODAWheel is not connected to any smartphone. If

connected, it will not enter the pairing mode. To disconnect CODAWheel, turn

Bluetooth off on the smartphone.

Summary of content (8 pages)

PAGE 1
CODAWheel Manual CODAWheel is a remote control designed for smartphones, based on Bluetooth Low Energy (BLE) technology. Its primary purpose is to facilitate the use of voice command services such as Siri® or Google Now® in Bluetooth hands-free mode in your car. Further, you can also edit its settings to perform various tasks using the configuration app, CODAWheel. Minimum Requirements - iOS® ver 7.0 and up with Siri or Android® Kitkat with Google Now and support for BLE.
PAGE 2
Press the button on CODAWheel for 15 seconds until green and red LEDs flash alternately. CODAWheel is now ready for pairing. From your smartphone, go to Bluetooth settings and initiate pairing. For step-by-step instructions, please refer to your smartphone manual. 3. Configuration Application CODAWheel is pre-configured to emulate smartphone’sHome button.Using the configuration application, you can change its settings to perform tasks such as: - Voice command:Click to start Siri or Google Now.
PAGE 3
CODAWheel can easily be placed anywhere in your car. You can attach it on the steering wheel, dashboard, or next to gear shift. Included in the box are double sided tape and Velcro sticky fastener for mounting purposes. One-Year Limited Warranty. Enustech warrants the said product to be free from defects in materials and workmanship for 1 year. If the said product is found to be defective, Enustech will repair or replace it.
PAGE 4
Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 5
Manuel de CODAWheel CODAWheel estunetélécommande conçuepour les smartphones, basée sur la technologie de Bluetooth Low Energy(BLE). Son principal objectifest de faciliterl'utilisation des servicesde commande vocalecommeSiri®ouGoogleNow®dans lemode Bluetoothmains-libresdans votre voiture. En outre,vous pouvez également modifierles paramètrespour effectuer diverses tâchesen utilisant l'applicationde configuration, CODAWheel. Exigences minimales IOS®version7.
PAGE 6
Appuyez sur le bouton « ON »duCODAWheelpendant 15 secondesjusqu'à ce queles LEDvertes et rougesclignotent en alternance. Le CODAWheelest maintenantprêt pour le couplage. De votresmartphone,allez dans les paramètres duBluetoothetactiver le couplage. Pour obtenir des instructionsétape-par-étape, veuillez vous référerau manuel de votresmartphone. 3. Application de la configuration CODAWheelest pré-configuré pour émulerle bouton Accueildusmartphone.
PAGE 7
5. Montage CODAWheelpeut facilementêtre placé n'importe oùdans votre voiture. Vous pouvez l'attachersurle volant, le tableau de bord, ou à côté duchangement de vitesse. Un adhésif double faceetla fixation collante de velcropour la fixation sont inclus dans la boîte. Garantielimitée d’un an Enustechgarantitleditproduit pour les défauts sur le matérielet sur la fabricationpour1 an.Si ceproduits'avèredéfectueux, Enustechs'engage à le réparer ouà le remplacer.
PAGE 8
“This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.