. Getting Started 2 3 1 5 4 6 7 8 1) Connection, Battery, FM Status 2) Microphone 3) Multi-function button 4) FM/TTS Button 5) Volume Up Button 6) Volume Down Button 7) Charging Port 8) Speaker 2. Charging the Product Be sure to use the vehicle charger and USB charger cable provided.
The product uses an advanced lithium polymer rechargeable battery. It is important that you charge the product for 2 hours the first time you use it, to ensure the battery is fully charged ready for use and for best performance. 1) How to charge Connect the product to the USB charger cable to the vehicle charger. Plug the vehicle charger into your car’s power outlet. The light on the USB charger cable will light up red while it is charging.
on. Power Off: Push the multi-function button of the product for 4 seconds to turn it off. 2) Connection To connect between the product and mobile phone, quick press on the Multifunction button. 3) Call Functions *Answer a call: Push with one quick press on the multi-function button. *End a call: Push with one quick press on the multi-function button. *Voice Dialing: To place a call using voice dialing, push with one quick press ( 1 second) on the multi-function button of the product.
9) Mute / Un-mute Hold down the Volume Down button for 1 second during the call. In this case, you will be able to hear the other person but they won’t be able to hear you. To unmute the call, hold down the Volume Up or Volume Down button. 10) Remove a registered mobile phone name from a list. The product has a registered mobile phone list that is recently connected. To remove the lists, hold down the multi-function button, Volume Up button and FM/TTS Button at the same time for 7 seconds.
13) Tuning a FM Frequency When the product is in FM Tuning mode, select 7 frequencies saved by pushing Volume Up and Volume down button. This function is operated only after exiting the selection mode. 15) Scanning one from available FM Frequency To save the frequency available, press on the FM/TTS button for 4 seconds while the product is paired with mobile phone. The frequencies will automatically be saved.
1. Handsfree Status indication Hands free status LED indication Standby/Idle Connection LED blinks every 2 seconds connected Connection LED lights on continuously. Incoming call Call Status LED blinks every 1 second. Active call Call Status LED lights on continuously. 2. FM Transmitter indication. FM transmit state LED indication No transmit FM LED remains turns off. Transmit FM LED remains turns on. Channel set FM LED blinks every 1 second. 3. TTS Status indication.
- Additional Page Cautions Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance Information This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received. Including interference that may cause undesired operation.