Datacard® SD™ Series Card Printers User’s Guide November 2013 Part No. 527399-001 Rev.
Notice Please do not attempt to operate or repair this equipment without adequate training. Any use, operation, or repair you perform that is not in accordance with the information contained in this documentation is at your own risk. Proprietary Notice All drawings and information herein are the property of DataCard Corporation. All unauthorized use and reproduction is prohibited.
Compliance Statements Liability Statement The WARNING and CAUTION labels have been placed on the equipment for your safety. Please do not attempt to operate or repair this equipment without adequate training. Any use, operation or repair in contravention of this document is at your own risk. Safety All Datacard® products are built to strict safety specifications in accordance with CSA/ UL60950-1 requirements and the Low Voltage Directive 2006/95/EC.
Regulatory Compliance These notices apply to the Datacard printer and all Datacard accessory devices that connect to the printer. FCC Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Host Device Labeling Requirement Notice To meet the FCC and Industry Canada host device labeling requirements, any host equipment incorporating the 506241 module must include the FCC ID/IC number on the host label as follows: Contains transmitter module IC: 889B-506241001 where 889B-506241001 is the module's IC certification number. Contains transmitter module FCC ID: GDI-506241001 where GDI-506241001 is the module's FCC ID number.
