TV User Guide Connecting at the Speed of Life support.scrtc.
TABLE OF CONTENTS Version as of May 2011 Welcome. This instructional TV Guide is provided by South Central Rural Telephone Cooperative, Inc. and South Central Telcom, LLC as a helpful tool to assist our TV subscribers in navigating throughout their on-screen TV Guide, and the operation of their Set Top Box (STB) and Remote Control. Remote Control................................................................. 2 Electronic Program Guide.................................................
REMOTE CONTROL Entone Remote Control URC Plus Part Name Description 1. Setup Used for remote control programming 2. Input Changes the A/V input of selected device 3. Power* Turns selected device on/off 4. STB* Puts remote in STB (set top box) mode Puts remote in TV mode 5. TV 6. Lang not used 7. Guide* Displays program guide Raises or lowers volume of selected device 8. Volume* 9. Last* Changes to most recently viewed channel Pauses DVR playback/Pause Live TV Feature 10. Pause 11.
ELECTRONIC PROGRAM GUIDE Press the Guide button on the Entone remote, and the program guide will display as seen below. The last channel viewed will be displayed at the top right of the screen with information about the program on the left. The program listings are displayed at the bottom of the screen. There are multiple preset guides such as All and Subscribed. Pressing and releasing Guide on the remote will toggle through the various guides.
ELECTRONIC PROGRAM GUIDE CONTINUED... Press the Menu button on the Entone Remote. The Menu will open as shown below. To open a Menu option scroll to that option using the Up or Down Arrow buttons and press the OK button on the Entone remote. Guide will display the program guide. DVR will display recorded programs, programs scheduled to record, and other DVR functions. (will only show if DVR is part of service) My Library wil display Caller ID, video, PPV event pay per block, reminders and message menus.
ENABLE CALLER ID Open the menu by pressing Menu on the Entone remote. The following screen will display. Step 1 Scroll to the Settings option by pressing the Up or Down Arrow buttons on the Entone remote. Once you have selected Settings, press the OK button on the Entone remote. The following screen will be displayed. Step 2 Press “0” on the number pad and then press OK on the Entone remote. The following screen will be displayed. (“0” is the default password.
CALLER ID LOG Press the Phone button at the bottom of the Entone remote. The screen below will display. Step 1 Information about selected call will display here Calls Logged will be displayed here Step 2 Scroll to the right then scroll down using the Up/Down Arrow button, on the Entone remote to display information for a specific phone number. Press Exit on the remote to return to television programming.
SET CALLER ID TIMEOUT CONTINUED... Press “0” on the number pad and then press OK on the Entone remote. The following screen will be displayed. (“0” is the default password.) Step 3 Scroll to Caller ID Timeout by using the Arrow buttons on the Entone remote, then press OK. You should now have an arrow on each side of Caller ID Timeout, as shown below. Step 4 You can now adjust the amount of time that the Caller ID displays on the screen by pressing the Right or Left Arrow buttons on the Entone remote.
DVR (DIGITAL VIDEO RECORDER) OPTIONAL FEATURE The DVR allows you to record regular scheduled programming as well as schedule recordings while absent from your TV & STB. How to record a program that is in progress... Press the Record button on the Entone remote control. The program information will display at the bottom of the screen. A red dot will display beside Live TV to the right of this screen indicating that the program is being recorded, as shown in screen below.
DVR CONTINUED... Press Exit on the Entone remote to leave the on-screen guide. To edit or cancel the scheduled recording press OK. The following screen will be displayed. Step 2 To cancel the recording scroll down to Cancel Recording using the arrow keys on the remote. Press OK or the Stop button and the recording will be cancelled. To edit the recording select Edit Recording and press OK on the Entone remote. The following screen will be displayed.
DVR CONTINUED... Scroll to Schedule Event by pressing the Down Arrow button on the Entone remote and press the OK button. The Schedule Event screen as shown here will be displayed. From this screen you can schedule a recording, reminder, or autotune. The frequency can be set to a single event, weekly, Monday through Friday or everyday. The date, start time and length of time can also be set.
DVR CONTINUED... A double red ball will be displayed beside the series to be recorded as shown in the following screen-shot. Press Exit on the Entone remote. Step 3 How to Cancel a Series Recording... Press the Record It button on the Entone Step 1 remote, then scroll down to Record. Any programs that are scheduled to record will be listed at the right. Scroll to the program that you would like to edit and press the OK button on the Entone remote. The following screen will display.
DVR CONTINUED... How to playback a recorded program... Press the Record-It button on the Entone remote. The following Step 1 screen will display. Using the Directional Arrow buttons on the Entone remote, scroll to the program that you would like to play. Then press OK on the Entone remote. The following screen will display. Use the Up or Down Arrow Buttons on the Entone remote to scroll to Play Recording, then press OK on Step 2 the Entone remote. The program will begin playback.
PAUSE LIVE TV (PLT) OPTIONAL FEATURE Must have DVR service to use this feature. (part of DVR service) The PLT feature will allow you to pause, rewind, fast foward and playback the program that is in progress. Pressing the Pause button on the Entone remote will pause the program. To resume play, press either the Pause button again or the Play button. To rewind the program press the Fast Reverse button on the Entone remote. To resume play press the Play button on the Entone remote.
SCHEDULE EVENT FROM PROGRAM GUIDE CONTINUED... The following screen will display. From this screen you can schedule a recording, reminder or autotune. The frequency can be set to a single event, weekly, Monday through Friday or everyday. The date, start time, and length of time can also be set. To change a field entry, scroll to that field using the Directional Arrow buttons on the Entone remote, then press the OK button.
SCHEDULED EVENTS CONTINUED... Scroll to Reminders: Any autotunes or reminders will be displayed on the right side of the screen as shown to the right. To cancel a reminder, scroll to the Step 2 program using the Directional Arrow buttons and press the OK button on the Entone remote. The following screen will be displayed. To remove the reminder press the OK button, then press Exit on the Entone remote. Step 3 PPV (PAY PER VIEW) How to Order a PPV Program...
PPV (PAY PER VIEW) CONTINUED... Scroll to Buy PPV then press the OK button and the following screen will display. Step 3 To order the program press the OK button on the Entone remote. To cancel order scroll to Cancel and press the OK button on the Entone remote. If you have set up a PIN you will need to enter the PIN before you will be able to purchase a program. (See page 24 on how to set up a PIN.
CREATE & EDIT FAVORITES How to Create Favorites... Press the Menu button on the Entone remote. The following screen will display. Using the Directional Arrow buttons on the remote, scroll to Favorites. Step 1 Press the OK button on the Entone remote. The screen below will be displayed. Scroll to Create then press OK. Step 2 The following screen will be displayed. Favorites1 is automatically created at this time.
CREATE & EDIT FAVORITES CONTINUED... How to Edit Favorites... Press the Menu button on the Entone remote. The following screen will display. Using the Directional Arrow buttons on the remote, scroll to Favorites. Step 1 Press the OK button on the Entone remote. The screen below will be displayed. Scroll to Edit and press OK. Step 2 The following screen will be displayed.
SEARCH FEATURE Press the Menu button on the Entone remote. The following screen will display. To use the search feature scroll to Search using the Up or Down Arrow button on the Entone remote. Then press the OK button on the remote. Step 1 The screen below should display. Press the OK button again to display the keypad as shown in this screen. Using the keypad enter the text that you would like to search for.
SEARCH FEATURE CONTINUED... If the program is scheduled to air at a later time the screen to the right will be displayed. Select the action that you would like to take and press OK on the remote. The Record Program option is only available with DVR. The Record Series option will also be displayed, if the selected program is a series. Step 4 CLOSED CAPTIONING Open the menu by pressing Menu on the Entone remote. The following screen should display.
CLOSED CAPTIONING CONTINUED... Scroll to Hardware Settings at the bottom of the screen. Then press the OK button on the Entone remote. The following screen will be displayed. Step 4 Scroll to Closed Caption ON and press the OK button on the Entone remote. Now press the Up or Down Arrow buttons to turn on Closed Captioning. If the TV is connected with component or HDMI cables, set Closed Captioning to ON STB CC1. If TV is connected with coaxial or composite cables, set Closed Captioning to ON TV.
ENABLE PARENTAL CONTROLS Open the menu by pressing Menu on the Entone remote. The following screen will display. Scroll to Step 1 the Settings option by pressing the Up or Down Arrow button on the Entone remote. Once you have selected Settings, press the OK button on the Entone remote. The following screen will be displayed. Press “0” on the number pad and then press OK on the Entone remote. Step 2 The following screen will be displayed.
EDIT PARENTAL CONTROLS How to Turn Parental Controls On & Off after it has been enabled... Press the Menu button on the Entone remote. The following screen will display. To turn Parental Control off, scroll to Control On using the Up or Down Arrow button on the Entone remote, then press the OK button on remote. The Enter Password screen will display. Enter Password (default password is “0”) using the Number buttons. Then press the OK button on the Entone remote. Parental Controls are now turned off.
EDIT PARENTAL CONTROLS CONTINUED... Scroll to the box beside Password using the Directional Arrow buttons on the Entone remote. Press the OK button on the Entone remote. Using the Number buttons enter the current password (the default password is “0”). Press the OK button. Scroll down to the New Password box and press the OK button. Enter New Password and press the OK button again. Now scroll to Confirm Password and enter New Password again. Press the OK button.
EDIT PARENTAL CONTROLS The following screen will display. Scroll down to Parental Control by Step 3 using the Directional Arrow buttons on the Entone remote, then press the OK button on the remote. The screen to the right will be displayed. From this screen the ratings can be changed by scrolling to the option that you would like to Step 4 change. When you have the option selected that you want to change press the OK button on the Entone remote.
CHANNEL BLOCKING Open the menu by pressing Menu on the Entone remote. The following screen will display. Scroll to Step 1 the Settings option by pressing the Up or Down Arrow buttons on the Entone remote. Once you have selected Settings press the OK button on the Entone remote. The following screen will display. Step 2 Press “0” on the number pad and press OK on the Entone remote. The following screen will be displayed.
CHANNEL BLOCKING CONTINUED... The following screen to the right will display. Now scroll down using the Down Arrow button on the remote and select a channel that you want to block. press OK after selecting a channel. After pressing OK, a circle with a line through it should display beside the blocked channel as seen in the following screen. Step 6 Continue to select and block channels as needed. When finished blocking scroll to Update using the Arrow buttons and press the OK button on the remote.
THEMES CONTINUED... The following screen will be displayed. Scroll to the Theme field by using the Arrow buttons on the Entone remote, then press OK on the remote. To change between themes press the Right or Left Step 3 Arrow button. After selecting the theme that you would like to use press the OK button on the Entone remote and scroll down to Submit. The following screen will be displayed. Press the OK button again. The new theme will be applied when the Entone STB reboots.
PROGRAMMING REMOTE CONTINUED... How to Program Remote to TV using Auto-Scan Method 1. Turn TV on. 2. Press TV button on remote. 3. Press and hold the setup button on remote until TV button blinks twice, release the setup button, the TV button will stay on. 4. Press the power button once. 5. Press the channel up or channel down button once. The TV button will start blinking. 6. Point the remote toward TV. 7. When the TV shuts off press the OK button to save code. 8. Press the STB button.
PROGRAMMING REMOTE CONTINUED... Press the STB button on the Entone remote once. The STB and AUX buttons will now be illuminated. Step 3 Now press 1, 2 or 3 on the number pad. Press 1 for stream 1 (channel 10 or video input); Press 2 for stream 2 (channel 23); Press 3 for stream 3 (channel 39). After pressing one of the numbers on the number pad the STB button will blink twice and go out, and the front panel on the STB will display "RC Reg 01, RC Reg 02 or RC Reg 03" depending on which number was pressed.
PROGRAMMING REMOTE Crown.................... 0036 0053 Curtis Mathes........ 0000 0004 0014 0045 0073 0097 CXC....................... 0036 Daewoo................. 0004 0005 0013 0015 0016 0097 0106 Daytron.................. 0004 0097 Dell........................ 0141 0142 0146 Dimensia............... 0000 Electroband........... 0002 Electrohome.......... 0002 0003 0004 0018 0021 Element................. 0004 0018 Emerson................
PROGRAMMING REMOTE Radio Shack/Realistic....0004 0011 0036 0045 0064 0097 0098 RCA............................0000 0003 0004 0005 0008 0018 0028 0052 0065 0067 0068 0071 0076 0082 0102 0104 0106 0108 0115 0151 Realistic......................0000 0045 Sampo........................0004 0097 0098 0120 Samsung....................0004 0005 0011 0014 0018 0019 0072 0073 0078 0094 097 0098 Sansui........................0023 0107 0122 Sanyo.........................0045 0103 Scotch........................0004 Scott.
TROUBLESHOOTING CONTINUED... Remote not changing channels Press the STB button on remote Make sure TV is on the right channel or input. (stream 1 on channel 10 or one of the video inputs, stream 2 on channel 23 and stream 3 on channel 39) Program remote to STB (hydra only).
Technical Assistance Center 678-2615 528-2615 407-2615 support.scrtc.
