KAMAI 6 MEDIA RECEIVER Quick Start Guide
製作要求:A5(148*210+/-1mm), 120g書紙,四色印刷 過啞油,釘裝 製作:袁龙 審核:唐雄 核準:蒋祖鸿 注:此框及內容不用印刷 cOPYriGHt ©2015 entone, inc. all rights reserved. this document contains proprietary information protected by copyright. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written consent of entone, inc., 20863 Stevens creek Blvd, Suite 300, cupertino, ca 95014, u.S.a.
important Safety instructions (continued) • • • Quick Start Guide • • • • • • • • • • • • • WarNiNG: to reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. the apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. read these instructions. keep these instructions. Heed all warnings. Follow all instructions. do not use this apparatus near water. clean only with dry cloth.
What’s included Quick Start Guide kamai media receiver diN-to-rca cable Quick Start Guide ir extender receiver (Optional) ethernet cable (Optional) Hdmi cable (Optional) ir remote control* 2 Batteries for remote control additional items that may be required (not included): • ethernet cable • Hdmi cable • digital audio cable • Network router remote control Guide* kamai media receiver kamai media receiver 4 ac Power adapter *the remote control may vary and is dependent on your service provider.
kamai — Front Panel kamai — rear Panel 1 2 1 2 3 4 5 6 7 8 Quick Start Guide Quick Start Guide Name Description Name Description 1 Network Led Solid green indicates network is connected 1 a/v Out 9-Pin diN conector for connecting to video output using diN-to-rca cable 2 Power Led Solid blue indicates the unit is on Solid red indicates the unit is in standby mode Flashing blue indicates the unit is starting up 2 Hdmi digital video and audio port for connecting to a highdefinition t
Option 2: composite video kamai provides two video options for connecting to your tv: Hdmi and composite video. Select a video option then proceed to Step 2. use the diN-to-rca cable provided Composite Video delivers good picture quality and connect the yellow cable to the yellow videO iN port on your tv. then proceed to the next step (“connecting audio”) to connect the red/white cables. make sure your tv is turned on and the correct video input is selected.
Option 2: Surround Sound kamai has two audio options: Stereo or Surround Sound. Select an audio option and proceed accordingly. if your tv is connected to an a/v receiver that supports dolby digital 5.1 Surround Sound, use a digital audio cable (sold separately) to connect kamai to the OPticaL audiO iN port on your a/v receiver. NOTE: if you have already selected Hdmi as your video connection, then skip this audio section and proceed to “connecting Network” on page 12.
SteP 4: POWeriNG uP Select from one of the following networking options. Setting up remote control Option #1 connect to a Wireless Network via a Wireless Network router or access Point Note: internal Wi-Fi is an optional feature for kamai. Please contact your service provider for the availability and detailed instructions on the wireless network conguration. 1. Open the battery cover by pressing down on the battery cover latch and sliding it off. 2.
Quick Start Guide 1. connect the power cord to the POWer port on the back of the kamai. 2. Plug the ac power adapter to a power outlet. 3. Follow the on-screen instructions. NOTE: make sure your tv is turned on and the correct video input is selected. declaration of conformity to ensure proper use of this product, please read this manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service location.
Notes Declaration of Conformity (Continued) QUICK START GUIDE Declaration of Conformity (United States Only) This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
©2015 entone, inc. entone, kamai and connecting the home are trademarks of entone, inc. Other company, product, and service names may be trademarks or service marks of others. all information contained in this document is subject to change without notice. information contained in this document is provided on an as is basis. in no event will entone be liable for damages arising directly or indirectly from any use of the information contained in this document. Subject to change without notice.